Windcutter Wagons

Another excellent workday with five of the team in action. Wagon #733, in the shed, had its end door repair section fully welded and primered. the rest of the inside was Bitumatstic coated. Most of the outside is in undercoat so only the topcoat and numbering to do.
Outside #560 (ex B279711) was also prepped and bitumasticed inside with lots of the outside undercoated. The frame had more prep work and is started to be painted/bitumasticed.


We are very grateful for the support being given by the C&W staff at Rothley as we have 4 wagons there at present, and it has meant that we have all been able to work without getting in each others way, so lots is being achieved.

 

Interesting bit of damage... any thoughts on how to fix it?

 

We have discussed this - it could be cut out and a new piece welded in, or heated and hammered... or we could just leave it...we will be guided by the GCR C & W team. You do have to wonder what was dropped on it to do that!

 

Was it someone who asked when it would be ready? Or commented that the livery was the wrong shade?

 

I'd previously been told a lot of the 16T wagons had been used by an industrial carrier to store engines in. These unsecured engines rattling around were apparently what caused many of the dents in the sides... Presumably if you dropped one from a decent height it could have caused it?

 

Hi Chris - yes we had 24 wagons from Rover Cars Ltd in 1992, then a further 5 in 1997. Despite being "Empty" there was a lot of compacted rust, swarf and scrap small parts of all sorts left in many of them. I'm sure scrap large castings, engine blocks etc would have been carried, but a lot of the dents were caused by the grab buckets and crane grippers used for loading and unloading.

 

Another good day with five at work on Wednesday. A lot of time was spent weld repairing the buffer shanks on the North end of #733. This was very old damage which was largely hidden under many coats of paint! The inside had its bitumastic coating finished and the remaining undercoating of the outside. A start was made with the East side and South end topcoated. More undercoating was done on #711 outside and the floor of B 551846 was given a fresh coat of bitumastic. We also have the ability to 3D print wagon plates - the small ones will go on our sales stand!

 

As may be realised we are on course to getting four, or even five, wagons back into running order by the middle of this year. So what is left to do?
By my records we have five wagons requiring major work. B 279722 (Ex ICI with poor wheelsets), B 273798 Unfitted, (never restored but work started 2023), B99163 (to be RN Black), B279702 (running but poor floor), B 573403 (poor floor).
Hopefully these will be coming to Rothley over the next few months. We will also need to keep our existing fleet running and they will have FTR exams towards the end of the year, so the "Lengthy train" of Windcutters will be in regular operation in 2025 ( certainly we aim to have 25@25!)

 

Another workday saw four of us in action. The paintwork on #733 has been finished (bar the stripe and numbers) and we now have 3 d printed wagon plates fitted!


and the wagons outside the shed are looking presentable but a new floor is needed on #711