If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Flying Scotsman

Rasprava u 'Steam Traction' pokrenuta od 73129, 24. Kolovoz 2010..

  1. green five

    green five Resident of Nat Pres

    Pridružen(a):
    30. Travanj 2006.
    Poruka:
    6,783
    Lajkova:
    2,623
    Spol:
    Muškarac
    Interesi:
    Design Draughtsman
    Grad:
    Hampshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Here is my video from Worplesdon last night. Turn up the volume and enjoy the superb sound of 60103 accelerating hard away from the gauging slack and on to Guildford:
     
  2. Duty Druid

    Duty Druid Resident of Nat Pres

    Pridružen(a):
    19. Srpanj 2010.
    Poruka:
    11,112
    Lajkova:
    4,704
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Nice! :)

    There really is something about moving steam at night.

    Can not wait to see her pounding up the Alps! :D
     
    green five se sviđa ovo.
  3. Spamcan81

    Spamcan81 Nat Pres stalwart

    Pridružen(a):
    25. Kolovoz 2007.
    Poruka:
    35,836
    Lajkova:
    22,272
    Interesi:
    Training moles
    Grad:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The Gresley Beat. You can't beat it.
     
    60017 and green five like this.
  4. green five

    green five Resident of Nat Pres

    Pridružen(a):
    30. Travanj 2006.
    Poruka:
    6,783
    Lajkova:
    2,623
    Spol:
    Muškarac
    Interesi:
    Design Draughtsman
    Grad:
    Hampshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Thank you. I guess it will be a while before she heads for the MHR.

    Sent from my D6603 using Tapatalk
     
  5. Duty Druid

    Duty Druid Resident of Nat Pres

    Pridružen(a):
    19. Srpanj 2010.
    Poruka:
    11,112
    Lajkova:
    4,704
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Who knows?........ guess that depends when we're drawn out the hat.... can see us having to do exactly like the other lines she's visited - ticket only, special timetable etc!
     
  6. A1X

    A1X Well-Known Member

    Pridružen(a):
    21. Ožujak 2011.
    Poruka:
    1,212
    Lajkova:
    1,268
    Interesi:
    Insurance
    Grad:
    Good Old Sussex by the Sea
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Something similar to when Clan Line visited?
     
  7. Duty Druid

    Duty Druid Resident of Nat Pres

    Pridružen(a):
    19. Srpanj 2010.
    Poruka:
    11,112
    Lajkova:
    4,704
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I doubt it given what has gone before on other lines.

    Though having Clan Line was a coup, but without the madness! :)
     
  8. Nigel Day

    Nigel Day Member

    Pridružen(a):
    17. Ožujak 2015.
    Poruka:
    275
    Lajkova:
    715
    Spol:
    Muškarac
    Interesi:
    Steam loco engineer
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I was sitting on a bus in York. There where two grand mothers talking about Flying Scotsman, there youth and going to see her in NRM with the grand children multiple times. The appeal to the general public always surprises me. This one loco does more for preserved steam than any one can comprehend. Scotsman deserves every penny spent on it for what it does for steam's survival. Sir Nigel would be delighted that Scotsman does so much good. A credit to all that has made her run again.
     
    Sheff, acorb, Martin Perry i 8 ostalih se sviđa ovo.
  9. DismalChips

    DismalChips Member

    Pridružen(a):
    11. Travanj 2016.
    Poruka:
    682
    Lajkova:
    715
    Grad:
    9A
    Heritage Railway Volunteer:
    No I do not currently volunteer
    To corroborate that, I went to see Flying Scotsman at Bury in January. My girlfriend bought the tickets secretly, after I'd been reminiscing once about how much I'd loved steam engines as a boy and hadn't really followed that interest as I got older.

    While we were there, I picked up a flyer for the restoration of 80097, which mentioned Barry scrapyard, which triggered a vague memory of being horrified by a photo of dozens of rusting engines as a kid, and led me to look it up. Combined with seeing a Bulleid pacific on another platform, and wondering what on earth that fantastic engine was, it's reawkened my interest, led me to the preservation movement and got me planning to get out and see more locomotives.

    I'd be surprised if I was the only one.

    Obviously my girlfriend is probably feeling that a nice gesture might have backfired a bit.
     
    Last edited: 27. Svibanj 2016.
  10. mrKnowwun

    mrKnowwun Part of the furniture

    Pridružen(a):
    22. Listopad 2011.
    Poruka:
    4,366
    Lajkova:
    2,823
    Interesi:
    Retired
    Grad:
    West Byfleet
    Heritage Railway Volunteer:
    No I do not currently volunteer
    The need to minimise gaps between stock and platform edge, means more than ever the need to maintain the railway to gauge and at the very least know what that gauge is ALL THE TIME. You don't go round shifting the 6 foot to meet the stock, you make the stock to fit the gauge. Fundamental rules of building and maintaining a railway. Its not a ruddy tramway or light railway, permanent way means just that. (till you rip it all up and turn it into a cycleway)
     
    Graft on se sviđa ovo.
  11. Big Al

    Big Al Nat Pres stalwart Staff Member Moderator

    Pridružen(a):
    30. Svibanj 2009.
    Poruka:
    22,591
    Lajkova:
    22,721
    Grad:
    1016
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Agree with that but sadly, it is becoming apparent that Flying Scotsman is not a gauge friendly locomotive. There is a certain irony that this is becoming an obstacle to its free movement on the system rather than the various mechanical and other issues that were hindering the restoration. I can see a few heritage lines biting their nails at present just in case the route to their line has a 'prohibit' somewhere along the route to them.
     
  12. Lplus

    Lplus Well-Known Member

    Pridružen(a):
    24. Studeni 2011.
    Poruka:
    1,919
    Lajkova:
    991
    Grad:
    Waiting it out.
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Apart from overhang on curves, it's possible the kinetic envelope for a steam loco is relatively large compared to the actual dimensions. Not so much for bogie passenger vehicles.
     
    26D_M se sviđa ovo.
  13. Big Al

    Big Al Nat Pres stalwart Staff Member Moderator

    Pridružen(a):
    30. Svibanj 2009.
    Poruka:
    22,591
    Lajkova:
    22,721
    Grad:
    1016
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Yes, I believe that is correct and neither should we be thinking that NR is being unnecessarily picky on this one (although of course, it is always possible that they are working from flawed data). The number of instances where FS has had to slow down considerably or is simply prohibited compared with other steam locomotives that have gone that way suggests a loco specific problem and this is not going away.
     
  14. mrKnowwun

    mrKnowwun Part of the furniture

    Pridružen(a):
    22. Listopad 2011.
    Poruka:
    4,366
    Lajkova:
    2,823
    Interesi:
    Retired
    Grad:
    West Byfleet
    Heritage Railway Volunteer:
    No I do not currently volunteer
    At the moment, its as new, and so is fairly "tight" As it piles on the miles, it will get sloppier and its kinetic envelope will increase. I guess NR is currently working on that worse case scenario.
     
  15. MellishR

    MellishR Resident of Nat Pres Friend

    Pridružen(a):
    16. Travanj 2009.
    Poruka:
    8,912
    Lajkova:
    5,849
    Listening to the videos of today's trip, the exhaust beats sound somewhat less even than in the videos of the early runs. Has a valve setting perhaps changed already or is there a slight leak somewhere?
     
  16. W.Williams

    W.Williams Well-Known Member

    Pridružen(a):
    20. Prosinac 2015.
    Poruka:
    1,650
    Lajkova:
    1,559
    Interesi:
    Mechanical Engineer
    Grad:
    Aberdeenshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Funny, I was thinking this too, she does sound different. However, performance still looks very healthy so...??
     
  17. Fred Kerr

    Fred Kerr Resident of Nat Pres Friend

    Pridružen(a):
    24. Ožujak 2006.
    Poruka:
    8,383
    Lajkova:
    5,368
    Spol:
    Muškarac
    Interesi:
    Freelance photo - journalist
    Grad:
    Southport
    It has been reported elsewhere that the main problem is the cab dimensions which have been identified as being slightly larger although in which direction has not been identified. Suffice to say that when it worked the Steam Dreams "Fife Circle" it needed to work wrong line at Dalmeny on the outward journey in order to clear the road bridge south of the station by the junction.
     
  18. std tank

    std tank Part of the furniture

    Pridružen(a):
    20. Rujan 2005.
    Poruka:
    3,927
    Lajkova:
    1,070
    Spol:
    Muškarac
    Interesi:
    Retired
    Grad:
    Liverpool
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Strange, Fred. I am sure I mentioned the word "wide".
     
  19. MellishR

    MellishR Resident of Nat Pres Friend

    Pridružen(a):
    16. Travanj 2009.
    Poruka:
    8,912
    Lajkova:
    5,849
    Given the policy of restoring FS as close as possible to its condition during the last part of its BR service, presumably there would be great reluctance to cut down its cab as with 6023 (though for width in FS's case rather than height).
     
  20. std tank

    std tank Part of the furniture

    Pridružen(a):
    20. Rujan 2005.
    Poruka:
    3,927
    Lajkova:
    1,070
    Spol:
    Muškarac
    Interesi:
    Retired
    Grad:
    Liverpool
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    It is not the cab that is the problem. It is the width across the running boards at the bottom of the cab that is bigger than on most locos.
     

Podijelite ovu stranicu