If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Current and Proposed New-Builds

本贴由 aron332017-08-15 发布. 版块名称: Steam Traction

  1. m0rris

    m0rris New Member

    注册日期:
    2009-01-09
    帖子:
    135
    支持:
    20
    Unfortunately, one of the many things that is very wrong about that one is that the bogies are knackered. IIRC, 45015 and a preserved 25 managed to escape the gas axe because they were so knackered that moving them was a total pain, which has also made restoring them too difficult as well!
     
  2. Mencken

    Mencken New Member

    注册日期:
    2012-06-05
    帖子:
    99
    支持:
    31
    Thanks Pete! I'd be in favour of all of these, and might support one or two, but I think that your No 3, the LNWR 'Problem', would be more interesting if in original condition. The only surviving engine by John Ramsbottom, one of our greatest railway engineers, is an 0-4-0 ST in badly "restored"(!) condition, and a replica of his 'Problem' - as built - would be a more fitting monument to him.
     
    已获得andrewshimminpete2hogs的支持.
  3. MarkinDurham

    MarkinDurham Well-Known Member

    注册日期:
    2007-05-04
    帖子:
    2,229
    支持:
    999
    所在地:
    Durham
    45015 has been mentioned - but I think they got away with it... :Smuggrin:
     
    已获得Forestpines的支持.
  4. 4950

    4950 New Member

    注册日期:
    2017-12-21
    帖子:
    26
    支持:
    32
    性别:
    所在地:
    Patshull Hall
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Popcorn at the ready...
     
    已获得MarkinDurhampaullad1984的支持.
  5. aron33

    aron33 Member

    注册日期:
    2016-05-22
    帖子:
    517
    支持:
    630
    性别:
    职业:
    Food packaging worker
    所在地:
    Mayfield, KY (USA)
    Heritage Railway Volunteer:
    No I do not currently volunteer
    [​IMG]
    NBR A Class 0-6-2T
     
    已获得andrewshimmin, Cartman, S.A.C. Martin另外2人的支持.
  6. Cartman

    Cartman Part of the furniture

    注册日期:
    2015-12-14
    帖子:
    2,755
    支持:
    2,109
    性别:
    职业:
    Van driver
    所在地:
    Cheshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Full size Triang Nellie! (Gets coat!)
     
    已获得The Green Howards, pete2hogs, aron33另外3人的支持.
  7. Jimc

    Jimc Part of the furniture

    注册日期:
    2005-09-08
    帖子:
    4,117
    支持:
    4,821
    职业:
    Once computers, now part time writer I suppose.
    所在地:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Its quite striking isn't it. More like that than the oft quoted LSWR C14 IMHO!
     
    已获得Cartman的支持.
  8. Cartman

    Cartman Part of the furniture

    注册日期:
    2015-12-14
    帖子:
    2,755
    支持:
    2,109
    性别:
    职业:
    Van driver
    所在地:
    Cheshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    How about designing and building a real Nellie then!!
     
    已获得pete2hogs的支持.
  9. paullad1984

    paullad1984 Member

    注册日期:
    2007-10-16
    帖子:
    925
    支持:
    436
    Metropolitan railway 0-6-4....
     
  10. 240P15

    240P15 Well-Known Member

    注册日期:
    2017-12-01
    帖子:
    1,603
    支持:
    1,593
    性别:
    所在地:
    Norway
    Heritage Railway Volunteer:
    No I do not currently volunteer
  11. paullad1984

    paullad1984 Member

    注册日期:
    2007-10-16
    帖子:
    925
    支持:
    436
  12. paullad1984

    paullad1984 Member

    注册日期:
    2007-10-16
    帖子:
    925
    支持:
    436
  13. pete2hogs

    pete2hogs Member

    注册日期:
    2007-10-16
    帖子:
    721
    支持:
    418
    A fair point, although an as-built DX might be a better example - in green livery and named!

    I hadn't really thought of particular engineers that are under-represent, I was thinking more of railways and locos that would have some practical use - though I admit it is hard to see what the Garratt could be used for - perhaps that should be crossed of the list as impractical even as a fantasy! Though, technically , it does have two engines. On the other hand I don't know if in its life it ever actually hauled a train.
     
    已获得andrewshimmin的支持.
  14. Cartman

    Cartman Part of the furniture

    注册日期:
    2015-12-14
    帖子:
    2,755
    支持:
    2,109
    性别:
    职业:
    Van driver
    所在地:
    Cheshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    The LNER Garrett and Big Bertha were never intended as traction units, they were solely for the purpose of banking at Wath and Lickey. I have seen a photo of the Garrett on a freight working at Woodhead once, and I believe the Midland tried Bertha out on the Wellingborough to Cricklewood coal hauls once, without success
     
    已获得Tuskaandalfi1的支持.
  15. paulhitch

    paulhitch Guest

    These proved very prone to frame cracking and were not perpetuated. The same boiler design was used for the later 4-4-4s

    PH
     
    已获得sir gilbert claughtonandrewshimmin的支持.
  16. paullad1984

    paullad1984 Member

    注册日期:
    2007-10-16
    帖子:
    925
    支持:
    436
    And?
     
  17. paulhitch

    paulhitch Guest

    Not a good choice of prototype if this exercise is anything more than one of fantasy.

    PH
     
    已获得LesterBrown的支持.
  18. 30854

    30854 Resident of Nat Pres

    注册日期:
    2017-03-08
    帖子:
    12,172
    支持:
    11,496
    性别:
    职业:
    Retired
    所在地:
    Brighton&Hove
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Wasn't that the reason Met No.1 (the 0-4-4t) survives? IIRC, a LPTB 0-6-4t was the first choice for preservation ..... until the would-be buyers were advised about the state of the frames? Pity one of the Met 4-4-4t's didn't survive, if only for the sake of preserving the wheel arrangement.

    Adhesion-wise, the 4-4-4t has to be one of the worst formats to grace the rails. Those built by Sir Vincent Raven were (IMO) rather splendid looking machines, but all were later rebuilt by HNG as class A8 pacific tanks. In Sweden, they went one better, producing a 2-4-4t, seemingly just to have a passenger loco which no-one would pinch to run bulk iron ore trains!

    Here's the LNER Encyclopedia page on the Raven locos:
    https://www.lner.info/locos/H/h1.php

    A 3'-0" gauge example existed on the County Donegal, where the inherent adhesion problems were compounded by increased axle load to produce a pair of Class 3 4-4-4t locos, which were restricted to operations between Stranorlar, Strabane and Derry. One went in 1933, the other lasted until closure of the Strabane-Derry line in 1953 (although always worked by the CDRJC, this section was wholly owned by the NCC, passing to the UTA after the British Transport Commission pulled out of the six counties, the only surprise there being it took 'em over 5 years to close it!).
     
    已获得Cartman的支持.
  19. Cartman

    Cartman Part of the furniture

    注册日期:
    2015-12-14
    帖子:
    2,755
    支持:
    2,109
    性别:
    职业:
    Van driver
    所在地:
    Cheshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Wasn’t there a 2-4-4 tank on one on the Northern Ireland 3’0” gauge lines as well? Also the GWR and LMS had a small number of 4-4-4Ts, the GWR ones came from the MSWJR and the LMS ones from the Wirral railway.
     
    Last edited: 2017-12-28
    已获得30854的支持.
  20. 8126

    8126 Member

    注册日期:
    2014-03-17
    帖子:
    830
    支持:
    974
    性别:
    I believe the first choice was actually L52, an F-class 0-6-2T, which the buyer was indeed warned off because of the state of its frames. There used to be a telling of the tale out there somewhere in the wilds of the internet. Met No.1 is nice and the number is good PR, but the F-class were very handsome little engines and L52 had dual brakes already, which would have come in handy in more recent times.
     
    已获得paullad198430854的支持.

分享此页面