If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

You have a time machine and you can go back to the 50s/60s and save one Engine. Which would it be ?

Discussion in 'Steam Traction' started by toplight, Dec 21, 2017.

  1. toplight

    toplight Well-Known Member

    Joined:
    May 18, 2009
    Messages:
    1,351
    Likes Received:
    1,288
    Location:
    Swindon, England
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Apparently the Tender used with Hush Hush has survived and is the one now behind A4 Union of South Africa. John Cameron had it swapped with USA original one when he bought it as it was in better condition.
     
    Tuska likes this.
  2. 8126

    8126 Member

    Joined:
    Mar 17, 2014
    Messages:
    823
    Likes Received:
    962
    Gender:
    Male
    Shot in the dark, but perhaps cracking of parts of the casting due to uneven thermal expansion with the large temperature cycles? I can see a steel casting with a simple cast iron liner being a lot more forgiving of that sort of thing than the full grey iron cylinder casting. Spheroidal graphite iron would be another solution, but it hadn't been invented then.
     
  3. 242A1

    242A1 Well-Known Member

    Joined:
    Dec 3, 2006
    Messages:
    1,558
    Likes Received:
    1,299
    My error Steve. I should have waited until I had access to what I part remembered. The hp cylinders had ring problems. They didn't last very long. Could be down to a number of factors; lubrication, materials, the impact of the temperatures involved. Was there any distortion of the block? Such distortion did cause leakage through valves which was one of the reasons Chapelon reverted to piston valves. Exactly what was involved with 10000 in this area we will never know.

    Later locomotive engineers found more modern materials useful. Better liners, rings, oils and methods of their application have all been used. What the LNE could have done in the 1920s to address the issue would not have been nothing and they might have made the issue tolerable.
     
    Steve likes this.
  4. Masterbrew

    Masterbrew New Member

    Joined:
    Feb 3, 2016
    Messages:
    90
    Likes Received:
    55
    Gender:
    Male
    Location:
    Staplehurst, Kent
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I did!
     
    andalfi1 likes this.
  5. johnofwessex

    johnofwessex Resident of Nat Pres

    Joined:
    Apr 6, 2015
    Messages:
    9,185
    Likes Received:
    7,226
    Gender:
    Male
    Occupation:
    Thorn in my managers side
    Location:
    72
    Heritage Railway Volunteer:
    No I do not currently volunteer
    What abut the GWR Moguls scrapped at Barry in the early days?
     
  6. pete2hogs

    pete2hogs Member

    Joined:
    Oct 16, 2007
    Messages:
    721
    Likes Received:
    418
    Let's be more ambitions. How about Lostock Hall shed complete from when I visited it in September 1967 - it was the only shed I ever got to go round in steam days.

    I still have a couple of terrible photos (taken with a Polaroid camera) which is the nearest to a time machine I suspect we will ever get :-(
     
  7. ghost

    ghost Part of the furniture

    Joined:
    May 29, 2006
    Messages:
    3,967
    Likes Received:
    5,064
    Gender:
    Male
    Location:
    N.Ireland
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Doesn't meet the OP's question though - you're only allowed ONE loco!

    Keith
     
  8. nine elms fan

    nine elms fan Part of the furniture

    Joined:
    Sep 18, 2012
    Messages:
    2,439
    Likes Received:
    855
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Wessex
    Heritage Railway Volunteer:
    No I do not currently volunteer
    See post 62.
     
  9. S.A.C. Martin

    S.A.C. Martin Part of the furniture

    Joined:
    Aug 31, 2010
    Messages:
    5,591
    Likes Received:
    9,325
    Gender:
    Male
    Occupation:
    Asset Engineer (Signalling), MNLPS Treasurer
    Location:
    London
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I recommend the William Brown book for further info on the Hush Hush. It's not perfect - and there's some points that I think proper engineers would question - but the photographs and the documents on offer from its early days offer an insight into what was a very important project for the LNER of the time.

    It is often misunderstood - the aim was to produce a locomotive comparable to an A1 for power but significantly more fuel efficient. By the time the A4s had come around, the original Hush Hush was almost there in its aims, but the improved A3s and A4s were simply better. As rebuilt, the W1 settled down and had a good service life, even proving the point on the original P2s when used on their lines temporarily (and leading to their rebuilding as a result).

    No doubt in my mind though - it is entirely possible to fix the problems of the original Hush Hush if a new build was attempted. Should one be attempted is another question - I don't believe there's any need for it.

    The original W1 became a dead end in locomotive development on the LNER. None of the technology contained within it, bar the Kylchap (used on Humorist and 4 A4s at a similar time) was taken forward into other locomotive designs. No other compounds built - certainly no other 4 cylinder engines after her rebuilding (one Atlantic had been rebuilt prior, I think?)

    As a historical curiosity, a beautiful locomotive in its own right, but the rebuilt engine was far superior.
     
  10. A Class 74
    Surprised it didn't give you the genesis of an idea :)
     
  11. MellishR

    MellishR Resident of Nat Pres Friend

    Joined:
    Apr 16, 2009
    Messages:
    8,068
    Likes Received:
    5,160
    Was it in a way a bit like Bulleid's later developments, with too much changed at once from the ordinary locomotives of the time? Presumably the rationale for a water-tube boiler was the difficulty of designing a conventional boiler for such a high pressure, but why go so high and compound expansion at the same time rather than either something around 280 psi and simple explansion or 220 psi and compounding?
     
  12. S.A.C. Martin

    S.A.C. Martin Part of the furniture

    Joined:
    Aug 31, 2010
    Messages:
    5,591
    Likes Received:
    9,325
    Gender:
    Male
    Occupation:
    Asset Engineer (Signalling), MNLPS Treasurer
    Location:
    London
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    So with the caveat that I am not a railway engineer (yet - watch this space!) and that I am merely making my own judgments based on years of reading on, and researching, the LNER, but:

    No, I don't believe this was the case. The W1 is not significantly different from compound locomotives being built of the time and its water tube type boiler, though different of course from all other railway locomotives of the time, proved to not be a particular problem so far as steam production was concerned.

    Gresley looked abroad more than once for inspiration and development and he no doubt was influenced by Chapelon in the choice of the W1 to be built as a compound locomotive, who in 1929 was also working on his own rebuilds of existing locomotives on Chemin de Fer and was particularly interested in compounding. The Kylchap - Chapelon's joint development with Kylala - was not fitted to the W1 until its later stages of its original form, and became a standard fitting on all LNER Pacifics in BR days.

    I think it is entirely fair and possible that Gresley did not understand compounding like Chapelon did. The W1 remained his only express passenger compound locomotive. Ivatt of course had produced a couple of compound Atlantics but on the LNER compounding was virtually nonexistent. There was nothing to measure against and nothing to learn from.

    The individual components of the W1's original form all work in theory. When applied in practice, the prototype was initially found wanting and unreliable. This isn't unusual: prototypes rarely work straight out of the box (perhaps we LNER enthusiasts are prejudiced due to Silver Link's most extraordinary debut?) and the W1's development continued until 1936.

    In its final form before rebuilding the major issues of the W1 - mainly steaming and air leaking into the casing - had been more or less resolved. It was actually doing what it was intended to do: be comparable to a Gresley A1 for power but to be more fuel efficient.

    The question marks over the W1 are largely due to preconceptions of what the prototype was intended to be used for. It was superseded by the A3s and A4s, largely because their fuel economies were superior to the A1s on which the W1 was being measured against.

    When rebuilt, the LNER gained a good locomotive. Not an outstanding one, but a good one. It did good work - not exceptional work - and was another good publicity tool for the LNER. It lasted until 1959 as one of the last non-standard prototypes, outlasted only by Great Northern in this respect.

    There was nothing wrong with the boiler design and it survived for many years as a stationary boiler outside Darlington works. It outlived the rebuilt locomotive too.
     
    2392 and MellishR like this.
  13. andrewshimmin

    andrewshimmin Well-Known Member

    Joined:
    Mar 18, 2011
    Messages:
    1,761
    Likes Received:
    2,160
    Heritage Railway Volunteer:
    No I do not currently volunteer
    There were various other water tube boiler locos before the W1: de Bouquet built one for the Nord in the early years of the century

    In 1929 Chapelon was at the Paris-Orleans and his first rebuilt Pacific came out in that year. Strictly speaking, Chapelon's exceptional locos of this period were mainly compounds because they were rebuilt from (de Glehn) compounds. His own personal developments on compounding came a bit later.

    I think there were as many as four GNR compound Atlantics but they were pretty rotten. The LNER did inherit the (good) GCR compound Atlantics and the excellent NER compound Atlantics, plus the original Smith compound 4-4-0 no 1619. Plus all the history of compounding by Wordsell senior on the GER and NER (although none of the actual compound locos, I think).
     
  14. Hermod

    Hermod Member

    Joined:
    May 6, 2017
    Messages:
    985
    Likes Received:
    283
    Gender:
    Male
    Location:
    Klitmoeller,Denmark
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Last edited: Dec 28, 2017
    andrewshimmin and 240P15 like this.
  15. pete2hogs

    pete2hogs Member

    Joined:
    Oct 16, 2007
    Messages:
    721
    Likes Received:
    418
  16. Cartman

    Cartman Well-Known Member Account Suspended

    Joined:
    Dec 14, 2015
    Messages:
    2,290
    Likes Received:
    1,672
    Gender:
    Male
    Occupation:
    Van driver
    Location:
    Cheshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    We always seem to, somehow, end up on LNER Pacific’s dont we? ;)
     
    Spinner, S.A.C. Martin and Matt37401 like this.
  17. Hermod

    Hermod Member

    Joined:
    May 6, 2017
    Messages:
    985
    Likes Received:
    283
    Gender:
    Male
    Location:
    Klitmoeller,Denmark
    Heritage Railway Volunteer:
    No I do not currently volunteer
    The Thompson de Glehn like versions look so strange that someone could have earned money for making it less offensive.
    My version looks better,is stiffer up front and uses less coal.
    Advice is free
     
    Last edited: Dec 28, 2017
  18. Hermod

    Hermod Member

    Joined:
    May 6, 2017
    Messages:
    985
    Likes Received:
    283
    Gender:
    Male
    Location:
    Klitmoeller,Denmark
    Heritage Railway Volunteer:
    No I do not currently volunteer
    An outside,front wheel drive 22 inch high pressure cylinder and a 33 inch LP between frames will do more work than a Brittania for less coal
     
  19. Matt37401

    Matt37401 Nat Pres stalwart

    Joined:
    Jun 8, 2014
    Messages:
    15,326
    Likes Received:
    11,662
    Occupation:
    Nosy aren’t you?
    Location:
    Nowhere
    Heritage Railway Volunteer:
    No I do not currently volunteer
    To build is a smidge more expensive though
     
  20. S.A.C. Martin

    S.A.C. Martin Part of the furniture

    Joined:
    Aug 31, 2010
    Messages:
    5,591
    Likes Received:
    9,325
    Gender:
    Male
    Occupation:
    Asset Engineer (Signalling), MNLPS Treasurer
    Location:
    London
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Always one who believes the Thompson Pacifics are out of the ordinary. :rolleyes:
     

Share This Page