If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Churchward County Project

Discussion in 'Steam Traction' started by aron33, Feb 9, 2018.

  1. Jimc

    Jimc Part of the furniture

    Joined:
    Sep 8, 2005
    Messages:
    4,052
    Likes Received:
    4,665
    Occupation:
    Once computers, now part time writer I suppose.
    Location:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    No, they're done a different way.

    I use a vector drawing package, a oldish version of Corel Draw to be precise. I made a shedload of GWR loco drawings for the book I did which is just coming out (see sig), and they are heavily based on the standard components. As a result I have a large library of 2d profile drawings of standard bits and pieces, so for the 2-8-0, for instance, I took the 4200 chassis drawing, added a Std1 boiler with the same pitch as a 2800, and juggled it fore and aft so the firebox was in what seemed to me to be a reasonable relationship to the axles. That then necessitated lengthening the smokebox, which was easy enough. Add a Castle cab, mod it for the lack of curves and a lower roof, and then tidy up various bits of framing and so on to make the bits work together. The concept is very much inspired by Holcroft's tale of how he put the 4300 together for Churchward - get all the standard bits, and then assemble them. So its nearly all standard components, but it does need a fair bit more work in the final stages than the GWS package.

    The GWS package is very ingenious and in many ways more sophisticated, since rather than use standard components there's an analysis of the typical relationships of the GWR components, and then it automatically stitches them together, but doesn't necessarily use an exact Std 4 boiler or whatever. I wouldn't like to try doing that sort of level of graphics coding, but I do rather like messing around with vector graphics programs, especially with the GW locos, but I've done all the standard ones for the book, so its either back to the 19thC, which is interesting but much more work, or else invent my own. So if someone says "How about" I rather rub my hands together!

    I'm now thinking about doing 3D drawings, but they are several levels of difficulty more work. However if I do end up with a reasonable library of standard components in Freecad I'll be in a good position to build some what if models with 3d printing....
     
    Last edited: Feb 23, 2018
    Richard Roper likes this.
  2. Smokestack Lightning

    Smokestack Lightning Member

    Joined:
    Oct 14, 2013
    Messages:
    262
    Likes Received:
    91
    Gender:
    Male
    That 2-8-0 looks to have a huge coupled wheelbase - comparable to the P2 even??

    Dave
     
  3. Jimc

    Jimc Part of the furniture

    Joined:
    Sep 8, 2005
    Messages:
    4,052
    Likes Received:
    4,665
    Occupation:
    Once computers, now part time writer I suppose.
    Location:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    The 2-8-0 tanks did have a much longer wheelbase than the 28s, but they had thin flanges on the centre pair of tyres and spherical bearings on the trailing coupling rod joints. The wheelbase is 8ft 9in -7ft - 6ft - 7ft.
     
  4. LesterBrown

    LesterBrown Member

    Joined:
    Jan 20, 2009
    Messages:
    995
    Likes Received:
    761
    Location:
    Devon
    Basically Jimc's 2-8-0 is just a small wheeled 4700 except that the driving axle is moved back 6" allowing a slightly longer connecting rod
     
  5. Smokestack Lightning

    Smokestack Lightning Member

    Joined:
    Oct 14, 2013
    Messages:
    262
    Likes Received:
    91
    Gender:
    Male
    So it is bigger than the P2, by 6 inches. Thanks for reply (and @LesterBrown ). I like the drawings by the way.

    Dave
     
  6. NOTFORME_99

    NOTFORME_99 New Member

    Joined:
    May 10, 2013
    Messages:
    110
    Likes Received:
    94
    Gender:
    Male
    A conversion of the 42/52 to a 2-6-0 retaining the Standard 4 boiler would be almost exactly a 4300 with smaller wheels.

    Yes, that looks very good.
    Thanks.
     
  7. Courier

    Courier New Member

    Joined:
    Dec 1, 2010
    Messages:
    197
    Likes Received:
    117
    Apologies if you're already aware of this drawing - but just in case...

    scan0007.jpg
     
  8. Jimc

    Jimc Part of the furniture

    Joined:
    Sep 8, 2005
    Messages:
    4,052
    Likes Received:
    4,665
    Occupation:
    Once computers, now part time writer I suppose.
    Location:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    No, I hadn't seen that one. I shall mod my drawing to match. Thank you very much. It will be interesting to see how much I guessed wrong!

    Can you read that chimney height dimension in the original? Interesting that its a notably high pitched boiler, inches higher than either the 28 or the 42.


    [Later - after some drawing]
    Ah, I understand. The high pitched boiler means that the boiler can be positioned further forward, more over the third pair of driving wheels. Mine had the boiler further back and lower, with a longer smokebox. Theirs is shorter and lighter, probably with better weight distribution.
     
    Last edited: Apr 8, 2018
    S.A.C. Martin likes this.
  9. Eightpot

    Eightpot Resident of Nat Pres Friend

    Joined:
    Aug 10, 2006
    Messages:
    8,077
    Likes Received:
    2,264
    Gender:
    Male
    Occupation:
    Engineer Emeritus
    Location:
    Aylesbury
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I gather that for the same weight distribution reason that the Stanier 8Fs had a shortened version of the Black 5 boiler.
     
  10. 240P15

    240P15 Well-Known Member

    Joined:
    Dec 1, 2017
    Messages:
    1,598
    Likes Received:
    1,588
    Gender:
    Male
    Location:
    Norway
    Heritage Railway Volunteer:
    No I do not currently volunteer
    jnc and Kinghambranch like this.
  11. Chris86

    Chris86 Well-Known Member

    Joined:
    Oct 31, 2011
    Messages:
    1,328
    Likes Received:
    1,315
    Occupation:
    Safety, Technical and Offroad Driver Trainer
    Location:
    South Yorkshore
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Kinghambranch likes this.
  12. Kinghambranch

    Kinghambranch Well-Known Member

    Joined:
    Dec 20, 2006
    Messages:
    1,868
    Likes Received:
    1,588
    Gender:
    Male
    Occupation:
    Retired
    Location:
    White Rose County
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I very much agree with you. This has had a somewhat "stop-start" history as a new-build project (or re-arrangement of extant GWR bits from the spares box) but approaching the production of new frames (OK they won't be the longest set of frames made in recent years) shows good progress. Early days yet of course but it would seem that things are moving forward. I still take the view that this 4-4-0 was perhaps not one of GJ Churchward's finest designs but it would be very interesting to see one recreated.
     
    jnc and flying scotsman123 like this.
  13. flying scotsman123

    flying scotsman123 Resident of Nat Pres

    Joined:
    Sep 9, 2013
    Messages:
    10,437
    Likes Received:
    17,937
    Gender:
    Male
    Location:
    Cheltenham
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Hopefully there's some extra support to be had from GWSR members; after all, if GWR 2-8-0s aren't your thing (shocking I know) then you haven't got a lot of choice in terms of restoration projects at the railway at the moment!
     
  14. Copper-capped

    Copper-capped Part of the furniture

    Joined:
    Apr 19, 2017
    Messages:
    2,563
    Likes Received:
    3,316
    Gender:
    Male
    Location:
    Stanthorpe, QLD, Australia
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I notice there is no "donate" button. I don't get it. :Banghead:
     
    The Dainton Banker, Gav106 and 240P15 like this.
  15. NOTFORME_99

    NOTFORME_99 New Member

    Joined:
    May 10, 2013
    Messages:
    110
    Likes Received:
    94
    Gender:
    Male
    I do hope this and the 47xx project are successful,
    If only to stop the old moan about all GWR locos being a 4-6-0 !
     
    ross, Bill Drewett, Gav106 and 2 others like this.
  16. Monkey Magic

    Monkey Magic Part of the furniture

    Joined:
    Jan 6, 2018
    Messages:
    3,498
    Likes Received:
    6,845
    Location:
    Here, there, everywhere
    Heritage Railway Volunteer:
    No I do not currently volunteer
    It seems to be a form for one off donations rather than an electronic set up.

    https://www.churchwardcounty.org.uk/support-us/

    I don’t know if it is difficult or how complicated it is to set up a ‘donate’ link + extra security for bank details etc etc
     
  17. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,099
    Likes Received:
    57,414
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    To set up an online form that takes payment directly to the organisation is actually pretty onerous to comply with the payment card industry security.

    So essentially, no small organisation would do that. Instead, you use a middle man to do all the payment processing securely, in exchange for a commission. There are numerous to choose from - JustGiving, PayPal, BTMydonate etc. Doing that is not especially hard; most of them will even arrange to process Gift Aid declarations for you if you are an eligible charity, saving a bit of administration and record keeping for your organisation.

    You do have to look closely at the scale of charges and match that to your expected profile of donations. For example, JustGiving and others have a monthly standing charge regardless of whether you get any donations - whereas others might have a bigger percentage cut of each donation, but no standing charge, which is better if your monthly income online is low.

    Then you have to look at to what extent you are part of a larger organisation - i.e., for online donations purposes, are you just one of several appeals under the umbrella of a larger organisation; or is each appeal apparently separate? That makes a difference if the provider charges any per-organisation setup or monthly fees. For example, your host railway might have an account and pay £X per month collectively, absorbing it as a cost of fundraising, allowing each group to then take the full amount of donations - that is obviously better than each group setting up an appeal in isolation and each individually paying £X per month. But it does depend on how a particular project sits corporately within the wider environment of the railway on which it is based (and even whether the host railway actually has a collected fundraising plan).

    Another point to consider is whether the fee is fixed per transaction, or a percentage per transaction. Generally you will get a fixed card handling fee (generally pence, regardless of the amount) and a percentage commission, ranging from 0% upwards. If there is a percentage commission, high value transactions become expensive - you are better, as far as possible, encouraging a "large" donor (large in that context maybe being > £50 or so) to send a cheque rather than donate online.

    Then there is the issue of mobile phone donations - does the provider allow them?

    There are tables online that allow comparison between leading providers. What never ceases to amaze me is that railways launching very small appeals continue to choose JustGiving, given that it seems to have the highest fees. I suspect that is because it has a lot of brand recognition, being in the market early, and in particular was one of the first to enable charities to process Gift Aid donations. But it is expensive!

    Disclaimer: This advice is worth what you paid for it (minus all appropriate handling fees...)

    Tom
     
    Last edited: May 4, 2018
  18. 240P15

    240P15 Well-Known Member

    Joined:
    Dec 1, 2017
    Messages:
    1,598
    Likes Received:
    1,588
    Gender:
    Male
    Location:
    Norway
    Heritage Railway Volunteer:
    No I do not currently volunteer

    Thank you very much for this very informative post Tom! :)I have to admit this is not the first that stuck my mind when thinking "Why not a donate buttom?" (Of course someone should have fees for organisation/drifting that possibility):Banghead:

    Knut:)
     
  19. JJJ

    JJJ New Member

    Joined:
    Jul 24, 2007
    Messages:
    59
    Likes Received:
    47
    Gender:
    Male
    Location:
    Gloucestershire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Was the plan to build this loco at the GWSR as I see the frames are being fabricated at Tyseley. Is this a short term arrangement till they build the loco shed extension?
     
  20. flying scotsman123

    flying scotsman123 Resident of Nat Pres

    Joined:
    Sep 9, 2013
    Messages:
    10,437
    Likes Received:
    17,937
    Gender:
    Male
    Location:
    Cheltenham
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    AFAIK no ground work has started at Toddington yet so presumably, yes.
     

Share This Page