If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Lubrication drift from Tornado thread.

Discussion in 'Steam Traction' started by guycarr360, May 2, 2018.

  1. guycarr360

    guycarr360 Part of the furniture

    Joined:
    Oct 4, 2005
    Messages:
    4,414
    Likes Received:
    2,729
    Gender:
    Male
    Location:
    Chester le Street County Durham
    A quick question from a novice.

    What prevents the "upping", of oiling rates for higher speed runs (mainline v heritage running), is their a specific reason not to do this????

    I could imagine problems with cylinder rings getting coked up with unused oil residue, more mess to sort eventually etc...

    Not knocking what has happened, just a question out of curiosity really.
     
  2. W.Williams

    W.Williams Well-Known Member

    Joined:
    Dec 20, 2015
    Messages:
    1,585
    Likes Received:
    1,465
    Occupation:
    Mechanical Engineer
    Location:
    Aberdeenshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    AIUI it’s about capacity. You can chuck in as much as you like, within limits, but you have to balance lubricatiin requirements with capacity.

    You don’t want to be sending oil up the lum in vast quantity tho.
     
    Last edited: May 2, 2018
    Bluenosejohn likes this.
  3. martin1656

    martin1656 Nat Pres stalwart Friend

    Joined:
    Dec 8, 2014
    Messages:
    17,609
    Likes Received:
    11,222
    Gender:
    Male
    Location:
    St Leonards
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Mechanical lubricators , or the restrictor type have a limited capacity of oil and by upping the rate of flow, you may prevent one problem but also add others, then you have to look at the type and make up of oils, will you need to specify a different type of oil for higher speeds oil can breakdown over a certain heat range its only a very thin film between metal to metal contacts anyway, much of the lubrication on locos runs through small bore copper piping, it don't take much to block a feed, or even for the operating lever to come adrift
     
    Bluenosejohn likes this.
  4. LMS2968

    LMS2968 Part of the furniture

    Joined:
    Sep 1, 2006
    Messages:
    2,987
    Likes Received:
    5,084
    Gender:
    Male
    Occupation:
    Lecturer retired: Archivist of Stanier Mogul Fund
    Location:
    Wigan
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    This was a problem with mechanical lubricators: it was possible the alter the drive to feed more oil to the steam chest and cylinders, and many drivers did this on the basis of, The more oil, the better. It wasn't. The valves and rings became heavily carbon coated leading the steam blow by, and when the engine was stripped to have the fault rectified, the fitters had a terrible job getting the valves out.
     
    andrewshimmin, Bluenosejohn and Johnb like this.
  5. class8mikado

    class8mikado Part of the furniture

    Joined:
    Jun 1, 2009
    Messages:
    3,609
    Likes Received:
    1,438
    Occupation:
    Print Estimator/ Repository of Useless Informatio.
    Location:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    If only they could find a lubricant that fractures into very pure graphite !
     
  6. LesterBrown

    LesterBrown Member

    Joined:
    Jan 20, 2009
    Messages:
    995
    Likes Received:
    761
    Location:
    Devon
    Wasn't there an engineer somewhere who was criticised because he thought it was better to use a lower degree of superheat with a hydrostatic lubricator?

     
    1472 likes this.
  7. W.Williams

    W.Williams Well-Known Member

    Joined:
    Dec 20, 2015
    Messages:
    1,585
    Likes Received:
    1,465
    Occupation:
    Mechanical Engineer
    Location:
    Aberdeenshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    If only you could get the superheat high enough...
     
  8. 8126

    8126 Member

    Joined:
    Mar 17, 2014
    Messages:
    823
    Likes Received:
    962
    Gender:
    Male
    What, Maunsell? There's a 24 element superheater in an S15 boiler, nothing particularly low superheat about that for a contemporary British mixed traffic class.
     
  9. class8mikado

    class8mikado Part of the furniture

    Joined:
    Jun 1, 2009
    Messages:
    3,609
    Likes Received:
    1,438
    Occupation:
    Print Estimator/ Repository of Useless Informatio.
    Location:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Churchward ?
     
  10. clinker

    clinker Member

    Joined:
    Oct 8, 2016
    Messages:
    569
    Likes Received:
    348
    Gender:
    Male
    Location:
    romford
    Heritage Railway Volunteer:
    No I do not currently volunteer


    It's worth remembering that 'More' is not always more, so to speak, to much volume can easily lead to less superheat as production of heat is dependent on several factors, not least of which is grate area, in reallity the more efficient a boiler is, the less heat is available for superheating.
     
    ross and LMS2968 like this.
  11. class8mikado

    class8mikado Part of the furniture

    Joined:
    Jun 1, 2009
    Messages:
    3,609
    Likes Received:
    1,438
    Occupation:
    Print Estimator/ Repository of Useless Informatio.
    Location:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Bronze piston valve rings anyone ?
     
  12. Allegheny

    Allegheny Member

    Joined:
    May 8, 2015
    Messages:
    625
    Likes Received:
    308
    Gender:
    Male
    Heritage Railway Volunteer:
    No I do not currently volunteer
    If I remember correctly, on "Red Devil", Wardale has a system for injecting saturated steam to control the temperature of the valve rings.
     
  13. 8126

    8126 Member

    Joined:
    Mar 17, 2014
    Messages:
    823
    Likes Received:
    962
    Gender:
    Male
    I may have been ever so slightly deliberately misunderstanding LesterBrown's clear inference regarding Churchward, but the point still stands. Most of the Southern classes of Urie and Maunsell ancestry had higher superheat than their GWR contemporaries and yet still used hydrostatic lubricators perfectly successfully. Eric Langridge, who moved from the LSWR to the Midland, wrote about the comparative freedom from carbon build ups under the valve rings of the LSWR classes superheated by Urie, as compared to that found on the Midland.

    I don't see how anyone could reasonably suggest that a 24 element superheater would be 'too much' given the general duties of the Southern 4-6-0s with the N15/S15 boiler, and commentary on this forum from those who crew them certainly doesn't seem to suggest they lack steaming capacity. If superheat is fitted, you can't really take it out of the boiler efficiency equation; if the steam produced has higher specific enthalpy you don't need to produce as much of it to have the same combined boiler/superheater efficiency.
     
  14. twr12

    twr12 Well-Known Member

    Joined:
    Sep 2, 2007
    Messages:
    1,540
    Likes Received:
    692
    First few MNs had hydrostatic lubricators when new.
    A huge contraption on the fireman’s side, must have been cursed by a few sore heads!
     
  15. Allegheny

    Allegheny Member

    Joined:
    May 8, 2015
    Messages:
    625
    Likes Received:
    308
    Gender:
    Male
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Superheat temperature also affects cylinder efficiency. A cylinder full of highly superheated steam will do the same amount of work as steam at the same pressure but a lower temperature, but due to it's lower density it contains less enthalpy. Less enthalpy is lost up the chimney.
     
    Hirn and andrewshimmin like this.
  16. clinker

    clinker Member

    Joined:
    Oct 8, 2016
    Messages:
    569
    Likes Received:
    348
    Gender:
    Male
    Location:
    romford
    Heritage Railway Volunteer:
    No I do not currently volunteer


    I'm not dissagreeing or trying to argue, particularly not on specific cases, merely pointing out that it is possible to 'overdo' things and get into the laws of diminishing returns, if 'Superheating' was such a simple matter then everyone would have done it.
     
  17. Allegheny

    Allegheny Member

    Joined:
    May 8, 2015
    Messages:
    625
    Likes Received:
    308
    Gender:
    Male
    Heritage Railway Volunteer:
    No I do not currently volunteer
    In a power station, the superheat temperature is pushed as high as possible, to the limit that the metal can withstand. However a power station boiler is usually run flat out for hours on end (if not longer).
    A locomotive is more of a compromise. Sometimes they are not running long enough for the superheater to reach maximum temperature. The superheated Stephenson boiler is not really an ideal heat exchanger; The steam is heated by some of the coolest gas, just before it enters the smokebox, and increasing the superheat temperature will also increase the heat losses of the gases passing through to the smokebox. Finally, as discussed upthread, there are limitations due the lubrication of the valvegear. These don't really apply to a turbine where, (hopefully) there are no sliding surfaces; the bearings are seals are remote from the main steam flow. The turbomotive had a larger superheater than the other Lizzies.
     
  18. class8mikado

    class8mikado Part of the furniture

    Joined:
    Jun 1, 2009
    Messages:
    3,609
    Likes Received:
    1,438
    Occupation:
    Print Estimator/ Repository of Useless Informatio.
    Location:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Did anyone ever try to superheat with tubes in the firebox ? not perhaps to get really high superheat, but because a boiler with extra tubes instead of superheater flues would be a tad better at producing steam in the first place ?
     
  19. LMS2968

    LMS2968 Part of the furniture

    Joined:
    Sep 1, 2006
    Messages:
    2,987
    Likes Received:
    5,084
    Gender:
    Male
    Occupation:
    Lecturer retired: Archivist of Stanier Mogul Fund
    Location:
    Wigan
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Thermic siphons?
     
  20. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,100
    Likes Received:
    57,414
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Not a superheater though, because they are full of water - by definition, a superheater has to take steam out of equilibrium with the boiling water so that the temperature can be raised over and above the saturation temperature.

    My gut feeling about trying to arrange superheating inside the firebox would be that you couldn't sufficiently cool any tubes carrying the steam (by definition they would not be in contact with any water, which has a large with a large heat capacity, but only in contact with steam) so there would be considerable risk of a tube failing, with obviously highly dangerous results.

    Ultimately, you have only got a certain amount of energy available. To a limited degree, you can redistribute it between the amount used to boil water; the amount used to further superheat the steam; and the amount wasted up the chimney. But you cannot change how much energy you have available in total, only - to a degree - the balance of what goes where.

    Tom
     

Share This Page