If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Use of Oak in Restoration

Discussion in 'Heritage Rolling Stock' started by Jordan Leeds, Sep 9, 2018.

  1. Jordan Leeds

    Jordan Leeds New Member

    Joined:
    Feb 10, 2018
    Messages:
    83
    Likes Received:
    65
    Gender:
    Male
    Location:
    lancashire/cheshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I am looking at rebuilding a vehicle that has a timber underframe and have a large oak Beam that we have sourced from an old barn a local farmer has demolished, my query is that traditionally you would not use ferrous fixings in oak due to the timber corroding the fastenings so what are the ways of combating this the drawings state an oak underframe and the beam we have sourced will yield enough for more than one vehicle in time being 22ft long and 6" square
     
  2. Martin Perry

    Martin Perry Nat Pres stalwart Staff Member Moderator Friend

    Joined:
    Apr 15, 2006
    Messages:
    16,510
    Likes Received:
    7,753
    Location:
    1012 / 60158
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Presume that shipbuilders used copper fastenings in oak?
     
  3. Ken_R

    Ken_R Member

    Joined:
    Oct 31, 2011
    Messages:
    309
    Likes Received:
    177
    My experience, with Mk 1 Carriages is that they certainly used ferrous fixings through Oak. However, as the Mk 1's were only expected to be in use 25 years +/-, such corrosion would not have been a problem. However, what I am dealing with now is 60-70 years old Carriages where the 3/8" (10mm) bolts on the Corridor connection timbers, have not only rotted in themselves, but the original bolts/fixings are rarely 4-5mm in their existent form.

    For replacements, we use BZP (Bright Zinc Plated) 10mm bolts, which should last, certainly beyond my lifetime.;) I don't envisage having to replace them a 'second' time.:rolleyes:

    If you really wanted any repairs to exist beyond your lifetime, and the lifetime of your Grandchildren, then A2 Stainless steel bolts are the solution, at a price.:(

    But then the Oak would degrade prior to the fixings.:cool:
     
  4. Sawdust

    Sawdust Member

    Joined:
    Jul 18, 2015
    Messages:
    508
    Likes Received:
    884
    Gender:
    Male
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    If you can use stainless steel as much possible.

    Sawdust.
     
  5. StoneRoad

    StoneRoad Member

    Joined:
    Oct 29, 2009
    Messages:
    923
    Likes Received:
    352
    Occupation:
    Restoration of heritage items, mainly in timber.
    Location:
    Haltwhistle
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I've used green oak for underframes (the three waggons for Bowes Railway) - we painted the inside of the holes and painted the bolts before use.
    E2A - and greased the bolts (ta for the reminder @gwalkeriow )

    For seasoned oak it is not such a problem, but painting or galvanizing is likely to be needed for ferrous fixings. Or use brass / bronze or stainless, but these have a cost implication ...

    Shipbuilders would use trenails or iron fixings for boats with substantial frames, for the lighter planking in yachts or lifeboats then copper nails and roves or bronze screws.

    I've some images on Ipernity ...
     
    Last edited: Sep 9, 2018
    Steve and gwalkeriow like this.
  6. gwalkeriow

    gwalkeriow Well-Known Member

    Joined:
    Aug 17, 2009
    Messages:
    1,703
    Likes Received:
    1,727
    Gender:
    Male
    Occupation:
    Retired.
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    We have used green oak for seven or is it eight wagon underframes with galvanised bolts with plenty of grease.
     
  7. RLinkinS

    RLinkinS Member

    Joined:
    Nov 8, 2008
    Messages:
    912
    Likes Received:
    928
    Gender:
    Male
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I find modern BZP screws corrode after a relatively short time. I suspect that the coating is very thin. I think A2 stainless is the answer even at a higher cost. My Father always greased screws heavily. I thought that this was messy but I am changing my mind as it certainly protects them and they come out much more easily. I also believe that holes for bolts in oak were charred. I suppose this neutralises the tannic acid.
     
    Steve and Sawdust like this.
  8. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,103
    Likes Received:
    57,432
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Holcroft talks about rebuilding an elderly sandwich framed GWR loco while apprenticed at Wolverhampton, and notes that they did just that: the iron frames and oak blocks between were drilled, and then red hot iron rods were pushed through to char the wood, after which the components were bolted together.

    (Locomotive Adventure, Vol 1 pg 33).

    Tom
     
  9. Ploughman

    Ploughman Part of the furniture

    Joined:
    Apr 1, 2008
    Messages:
    5,806
    Likes Received:
    2,649
    Occupation:
    Ex a lot of things.
    Location:
    Near where the 3 Ridings meet
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    This is the newly retimbered frame for Snowplough 18 back in 2010
    In Oak
    IMG_2675.JPG IMG_2676.JPG
     
  10. Steve

    Steve Resident of Nat Pres Friend

    Joined:
    Oct 7, 2006
    Messages:
    11,930
    Likes Received:
    10,088
    Occupation:
    Gentleman of leisure, nowadays
    Location:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    When I've watched wagon solebars being changed at Allerton Bywater wagon shops they always used red hot pokers in the holes and the metalwork was always steel/iron. It amazed me how quickly the solebars could be changed on a wagon. All done in a day, albeit with a ready prepared replacement solebar.
     
    Copper-capped and 2392 like this.
  11. 61624

    61624 Part of the furniture

    Joined:
    Sep 27, 2006
    Messages:
    5,294
    Likes Received:
    3,596
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I haven't had to do it but if I did I'd think about wrapping the bolt with ptfe tape (assuming it isn't a drive fit in the hole).
     
  12. John Baritone

    John Baritone New Member

    Joined:
    Feb 22, 2018
    Messages:
    140
    Likes Received:
    134
    Gender:
    Male
    Location:
    Buxton
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Actually, the reason for charring holes in timber is not just to protect the fixings, but also the timber. The reason is that various forms of rot can only attack timber - but not the charcoal that you get on the inside of the hole when you shove the red hot metal through. Charring wood like this was used to fit new shafts to things like long handled slashers and bill hooks, fireman's shovels and shunting poles. Just heat up the socket to a black heat, push the new handle in, and the socket will shape the wood to a perfect fit, and protect it from rot - even when used in situations as damp as lineside clearance or on steam loco footplates.

    Some time back, amateur archaeologists dug up some hardwood stakes which had been sharpened at both ends, scorched in a fire, and driven into the bed of a river in a shallow stretch which could be forded on foot in the summer (can't remember the location, but I think it was in the Thames Valley area). The stakes had no other rot protection, such as wood pitch or paint, but were still perfectly sound.

    At first the finders thought they might have been put in by the local Home Guard during WWII, as an anti-invasion defensive measure - but the local members of the HG who were still alive said they knew nothing about them - and didn't even know that stretch of the river could be forded. Eventually, they persuaded a museum to get the stakes carbon dated; to their amazement, the dating suggested that the stakes had been placed in the river bed during the Roman invasion of Britain, nearly 2,000 years ago!
     
    RLinkinS, pmh_74, CH 19 and 3 others like this.
  13. RLinkinS

    RLinkinS Member

    Joined:
    Nov 8, 2008
    Messages:
    912
    Likes Received:
    928
    Gender:
    Male
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I fit files to handles by heating the tang then driving it into the handle
     
    John Baritone likes this.
  14. Jordan Leeds

    Jordan Leeds New Member

    Joined:
    Feb 10, 2018
    Messages:
    83
    Likes Received:
    65
    Gender:
    Male
    Location:
    lancashire/cheshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Looking at the drawings I have for the coaches the sole bars are 4 x 2 section I'm concerned about the oak splitting given the relative thin nature of it has anyone any suggestions or alternative materials a steel underframe has been mused but would present serious design implications
     

Share This Page