If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Schools class question

Тема в разделе 'Steam Traction', создана пользователем paullad1984, 21 ноя 2018.

  1. paullad1984

    paullad1984 Member

    Дата регистрации:
    16 окт 2007
    Сообщения:
    925
    Симпатии:
    436
    Just seen a picture of a schools class crank axle, and there appears to be a sprocket with a chain on it to what did this attach?
     
  2. gwalkeriow

    gwalkeriow Well-Known Member

    Дата регистрации:
    17 авг 2009
    Сообщения:
    1.710
    Симпатии:
    1.732
    Пол:
    Мужской
    Род занятий:
    Retired.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    It is tool being used to true up the journals, not a permanent fixture.
     
    Jamessquared и 240P15 нравится это.
  3. Jamessquared

    Jamessquared Nat Pres stalwart

    Дата регистрации:
    8 мар 2008
    Сообщения:
    27.793
    Симпатии:
    64.457
    Адрес:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    If it’s the photo on Facebook, it actually looks like the Q class crank axle, not the Schools! I think the same work was done to both though.

    I happened to take these photos at the weekend of both crank axles. The Q has two cranks for the two inside cylinders and four eccentric sheaves for the two sets of Stephenson’s valve gear. The Schools has one crank and one eccentric sheave for one set of Walschaert’s gear.

    Q class

    40A638B7-F286-4983-AE62-DE74E90F3127.jpeg

    Schools class.

    5DCB9001-EDE9-4F5B-8A49-900E592C9FC7.jpeg

    Tom
     
    andrewshimmin и S.A.C. Martin нравится это.
  4. Ploughman

    Ploughman Part of the furniture

    Дата регистрации:
    1 апр 2008
    Сообщения:
    5.969
    Симпатии:
    2.761
    Род занятий:
    Ex a lot of things.
    Адрес:
    Near where the 3 Ridings meet
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    It's what the key winds up.:)



    Is that my taxi?
     
    Bluenosejohn, MellishR и LMS2968 нравится это.
  5. paullad1984

    paullad1984 Member

    Дата регистрации:
    16 окт 2007
    Сообщения:
    925
    Симпатии:
    436
    This one
     

    Вложения:

  6. Jamessquared

    Jamessquared Nat Pres stalwart

    Дата регистрации:
    8 мар 2008
    Сообщения:
    27.793
    Симпатии:
    64.457
    Адрес:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Definitely the Q class, but the same work was done on both.

    Tom
     
  7. paullad1984

    paullad1984 Member

    Дата регистрации:
    16 окт 2007
    Сообщения:
    925
    Симпатии:
    436
    So what's the sprocket and chain for?
     
  8. S.A.C. Martin

    S.A.C. Martin Part of the furniture

    Дата регистрации:
    31 авг 2010
    Сообщения:
    5.615
    Симпатии:
    9.418
    Пол:
    Мужской
    Род занятий:
    Asset Engineer (Signalling), MNLPS Treasurer
    Адрес:
    London
    Heritage Railway Volunteer:
    Yes I am an active volunteer
     
    gwalkeriow нравится это.
  9. Steve

    Steve Resident of Nat Pres Friend

    Дата регистрации:
    7 окт 2006
    Сообщения:
    12.729
    Симпатии:
    11.847
    Род занятий:
    Gentleman of leisure, nowadays
    Адрес:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Does the Bluebell have its own kit for this or do they get contractors in?
     
  10. Jamessquared

    Jamessquared Nat Pres stalwart

    Дата регистрации:
    8 мар 2008
    Сообщения:
    27.793
    Симпатии:
    64.457
    Адрес:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Done by a specialist contractor. From the eNewsletter / motive power thread:

    One such "heavy" item is attention to the crank axle of Q class No. 30541. Recently the loco has been "knocking" under steam, so immediately after our "Giants of Steam" event, No. 30541 entered the Loco Works for some attention and maintenance to the crank axle, big ends, small ends, eccentric straps, and axle boxes.

    As I write, the crank axle has been removed and the journals are being machined, using a specialist company, to remove the 12 thousands of an inch taper across the length of the journal. Once complete, this work will ensure there is no twist under steam on the connecting rod putting pressure on the small ends.

    […]

    Schools class No. 928 "Stowe" reached a significant milestone in October when the chassis was re-wheeled for the final time. The crank axle is yet to be installed as this also needs the same specialist machining, and once complete it will be fitted using our wheel drop. In the meantime, work continues on the chassis with the finer items while the inner firebox is stored awaiting fitting.

    https://www.national-preservation.com/threads/bluebell-motive-power.33437/page-149#post-2299863

    Tom
     
    Bluenosejohn нравится это.
  11. paullad1984

    paullad1984 Member

    Дата регистрации:
    16 окт 2007
    Сообщения:
    925
    Симпатии:
    436
    I hadn't seen that post
     

Поделиться этой страницей