If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Schools class question

Discuție în 'Steam Traction' creată de paullad1984, 21 Noi 2018.

  1. paullad1984

    paullad1984 Member

    Înscris:
    16 Oct 2007
    Mesaje:
    925
    Aprecieri primite:
    436
    Just seen a picture of a schools class crank axle, and there appears to be a sprocket with a chain on it to what did this attach?
     
  2. gwalkeriow

    gwalkeriow Well-Known Member

    Înscris:
    17 Aug 2009
    Mesaje:
    1.710
    Aprecieri primite:
    1.732
    Sex:
    Masculin
    Ocupație:
    Retired.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    It is tool being used to true up the journals, not a permanent fixture.
     
    Jamessquared și 240P15 apreciază asta.
  3. Jamessquared

    Jamessquared Nat Pres stalwart

    Înscris:
    8 Mar 2008
    Mesaje:
    27.793
    Aprecieri primite:
    64.457
    Locație:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    If it’s the photo on Facebook, it actually looks like the Q class crank axle, not the Schools! I think the same work was done to both though.

    I happened to take these photos at the weekend of both crank axles. The Q has two cranks for the two inside cylinders and four eccentric sheaves for the two sets of Stephenson’s valve gear. The Schools has one crank and one eccentric sheave for one set of Walschaert’s gear.

    Q class

    40A638B7-F286-4983-AE62-DE74E90F3127.jpeg

    Schools class.

    5DCB9001-EDE9-4F5B-8A49-900E592C9FC7.jpeg

    Tom
     
    andrewshimmin și S.A.C. Martin apreciază asta.
  4. Ploughman

    Ploughman Part of the furniture

    Înscris:
    1 Apr 2008
    Mesaje:
    5.969
    Aprecieri primite:
    2.761
    Ocupație:
    Ex a lot of things.
    Locație:
    Near where the 3 Ridings meet
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    It's what the key winds up.:)



    Is that my taxi?
     
    Bluenosejohn, MellishR și LMS2968 apreciază asta.
  5. paullad1984

    paullad1984 Member

    Înscris:
    16 Oct 2007
    Mesaje:
    925
    Aprecieri primite:
    436
    This one
     

    Fișiere atașate:

  6. Jamessquared

    Jamessquared Nat Pres stalwart

    Înscris:
    8 Mar 2008
    Mesaje:
    27.793
    Aprecieri primite:
    64.457
    Locație:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Definitely the Q class, but the same work was done on both.

    Tom
     
  7. paullad1984

    paullad1984 Member

    Înscris:
    16 Oct 2007
    Mesaje:
    925
    Aprecieri primite:
    436
    So what's the sprocket and chain for?
     
  8. S.A.C. Martin

    S.A.C. Martin Part of the furniture

    Înscris:
    31 Aug 2010
    Mesaje:
    5.615
    Aprecieri primite:
    9.418
    Sex:
    Masculin
    Ocupație:
    Asset Engineer (Signalling), MNLPS Treasurer
    Locație:
    London
    Heritage Railway Volunteer:
    Yes I am an active volunteer
     
    gwalkeriow apreciază asta.
  9. Steve

    Steve Resident of Nat Pres Friend

    Înscris:
    7 Oct 2006
    Mesaje:
    12.729
    Aprecieri primite:
    11.847
    Ocupație:
    Gentleman of leisure, nowadays
    Locație:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Does the Bluebell have its own kit for this or do they get contractors in?
     
  10. Jamessquared

    Jamessquared Nat Pres stalwart

    Înscris:
    8 Mar 2008
    Mesaje:
    27.793
    Aprecieri primite:
    64.457
    Locație:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Done by a specialist contractor. From the eNewsletter / motive power thread:

    One such "heavy" item is attention to the crank axle of Q class No. 30541. Recently the loco has been "knocking" under steam, so immediately after our "Giants of Steam" event, No. 30541 entered the Loco Works for some attention and maintenance to the crank axle, big ends, small ends, eccentric straps, and axle boxes.

    As I write, the crank axle has been removed and the journals are being machined, using a specialist company, to remove the 12 thousands of an inch taper across the length of the journal. Once complete, this work will ensure there is no twist under steam on the connecting rod putting pressure on the small ends.

    […]

    Schools class No. 928 "Stowe" reached a significant milestone in October when the chassis was re-wheeled for the final time. The crank axle is yet to be installed as this also needs the same specialist machining, and once complete it will be fitted using our wheel drop. In the meantime, work continues on the chassis with the finer items while the inner firebox is stored awaiting fitting.

    https://www.national-preservation.com/threads/bluebell-motive-power.33437/page-149#post-2299863

    Tom
     
    Bluenosejohn apreciază asta.
  11. paullad1984

    paullad1984 Member

    Înscris:
    16 Oct 2007
    Mesaje:
    925
    Aprecieri primite:
    436
    I hadn't seen that post
     

Distribuie pagina asta