If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

BR Standard locos

Discussion in 'Steam Traction' started by martin1656, Jul 27, 2019.

  1. martin1656

    martin1656 Nat Pres stalwart Friend

    Joined:
    Dec 8, 2014
    Messages:
    17,609
    Likes Received:
    11,223
    Gender:
    Male
    Location:
    St Leonards
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Despite the use of the term standard, apart from the cab layout these engines were not that standard as there seems to be many variations not just between classes, but often from batch to batch of the same type, and that's without starting on the tenders.
     
  2. std tank

    std tank Part of the furniture

    Joined:
    Sep 20, 2005
    Messages:
    3,808
    Likes Received:
    946
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Liverpool
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Not all the cab layouts were the same. The Std 4 2-6-4 tanks had the "bacon slicer" reverser and the Std 2 2-6-0s and 2-6-2 tanks had the modified Ivatt style reversers. Then there are firehole doors, GWR or LMS styles. One could go on. The drain cocks were all the same, though.
    I found out something very interesting, recently. In the RCTS Standards Book Vol 1 there is a photo of Brit 70004 taken in 1966, whilst allocated to 9B Stockport. It was fitted with a fluted rear coupling rod. Now all the Brits were supposed to have been modified with rectangular section coupling rods by 1955, instead of the original fluted coupling rods. I found another photo of 70004, taken approx the same time. Low and behold, it was, indeed, fitted with a fluted rear coupling rod AND a rectangular section front coupling rod. Looking through photos of the Class taken during the 1960s, I found that 70004, 70014, 70016, 70017, 70019, 70020, 70022, 70023, 70024 and 70031 were all similar. I am surprised that this has never been picked up previously. A few people with the relevant 5" gauge Britannia Class locos might be a bit upset that their loco is wrong.
     
  3. jnc

    jnc Well-Known Member

    Joined:
    Apr 3, 2012
    Messages:
    1,511
    Likes Received:
    2,706
    Gender:
    Male
    Location:
    Western Atlantic
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I had the impression that they were called "standard" in the sense that there would be one 'standard' design, BR-wide, for each role (e.g. class 6 freight engine), as opposed to the plethora of different designs BR inherited. It might also have applied to the desire to use (where possible) parts in common between different designs, a la GWR practise.

    Noel
     
  4. class8mikado

    class8mikado Part of the furniture

    Joined:
    Jun 1, 2009
    Messages:
    3,610
    Likes Received:
    1,438
    Occupation:
    Print Estimator/ Repository of Useless Informatio.
    Location:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Indeed the philsophy was always a class x (insert power here) that would go wherever any pre nationalisation loco of the same power class could go and ideally further...
     
    grandsire likes this.
  5. Jimc

    Jimc Part of the furniture

    Joined:
    Sep 8, 2005
    Messages:
    4,052
    Likes Received:
    4,665
    Occupation:
    Once computers, now part time writer I suppose.
    Location:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    It seems to me that Riddles team were working on the theory that there would eventually be hundreds of each class as all the pre group and big four classes were withdrawn, so there was no point in compromising the design of each class too much for standardisation between classes. The numbering scheme envisages over 1,000 of three of the classes.

    Of course, like so much else, they were comprehensively mistaken...
     
  6. Jimc

    Jimc Part of the furniture

    Joined:
    Sep 8, 2005
    Messages:
    4,052
    Likes Received:
    4,665
    Occupation:
    Once computers, now part time writer I suppose.
    Location:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Is it possible they may have had both at different times, in the same way that GW locos could return to older specifications according to what was available in the pool when they were shopped?
     
  7. std tank

    std tank Part of the furniture

    Joined:
    Sep 20, 2005
    Messages:
    3,808
    Likes Received:
    946
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Liverpool
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    As far as I am aware, all the motion on Standard locos was stamped with the particular loco number, but I will investigate further.
     
  8. LMS2968

    LMS2968 Part of the furniture

    Joined:
    Sep 1, 2006
    Messages:
    2,987
    Likes Received:
    5,084
    Gender:
    Male
    Occupation:
    Lecturer retired: Archivist of Stanier Mogul Fund
    Location:
    Wigan
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Yes, but that doesn't mean they always went back on their original engine, though they would usually have done so. In England anyway; Scotland was a different matter altogether if any went to St Rollox.
     
  9. peckett

    peckett Member

    Joined:
    Sep 26, 2006
    Messages:
    726
    Likes Received:
    549
    Long forgotten ,but the class 5 73s,73000 to 73065? had chime whistles when built. They were replaced in a about 1957/8 with the GWR sounding whistle ,still in the same place behind the chimney. Engines built after 73065? had whistle just in front of the top off the cab as normal. It was said at the time in Trains Illustrated that they were changed because plate- layers working near docklands in South Wales,were confusing the sound with boat hooters.Yes I know 86C Cardiff Canton had a number of Britannia's at the time with chime whistles. I've questioned marked 73065 ,any one know for sure what number the new 73s where altered. See photo' attached taken 01/06/1958 ,of 73026 with chime whistle, at 84A Wolverhampton Stafford Road one of the last to be altered I think.
     

    Attached Files:

  10. std tank

    std tank Part of the furniture

    Joined:
    Sep 20, 2005
    Messages:
    3,808
    Likes Received:
    946
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Liverpool
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Just to clarify- Chime whistles were fitted to Standard 5s up to 73089. Not all were replaced. The reason for replacement appears to be whistle valves sticking open due to problems with the operating cable, which ran along the outside of the boiler between the cab and the valve on the smokebox. Surely, though, the same problem would still be there with the smaller whistles fitted, just a bit quieter.
     
  11. peckett

    peckett Member

    Joined:
    Sep 26, 2006
    Messages:
    726
    Likes Received:
    549
    Yes I should have known with 73082 on the Bluebell. A bit quieter ?.Not so sure about that.
     
  12. peckett

    peckett Member

    Joined:
    Sep 26, 2006
    Messages:
    726
    Likes Received:
    549
    I remember inspecting 3cyl Stanier tank 2500 at Bressingham in the 1970s,one of the wheel axes was stamped a different number ,not even in the 3cyl series ,no doubt still the same.
     
  13. 240P15

    240P15 Well-Known Member

    Joined:
    Dec 1, 2017
    Messages:
    1,598
    Likes Received:
    1,588
    Gender:
    Male
    Location:
    Norway
    Heritage Railway Volunteer:
    No I do not currently volunteer
  14. std tank

    std tank Part of the furniture

    Joined:
    Sep 20, 2005
    Messages:
    3,808
    Likes Received:
    946
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Liverpool
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Not as far as I know. Some of the LMS rebuilt Royal Scot Class were fitted with roller bearings on the big end of the inside connecting rod, during the 1950s.
     
    240P15 likes this.
  15. Hermod

    Hermod Member

    Joined:
    May 6, 2017
    Messages:
    985
    Likes Received:
    283
    Gender:
    Male
    Location:
    Klitmoeller,Denmark
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Was crank or bearing split and is there something on the web about it?
    The swedes had some inside cylinder 2-8-0 in war emergency storage where crank was built up with oil pressure(SKF method) I think.
    https://www.national-preservation.com/attachments/e2-1329-rullagervev-morrgan-jpg.27787/
    The Germans tried on one Baureihe 10 and failed.Not easy.
     
    Last edited: Aug 1, 2019
  16. blink bonny

    blink bonny Member

    Joined:
    Jul 26, 2012
    Messages:
    687
    Likes Received:
    3,233
    Location:
    northumberland
    08-Brit-70004-Kingmoor-25jun67-casg.jpg
    Interesting. 70004 at Kingmoor in June 1967, not long before the end of its days and only a few days after being reallocated there from 9B. It was withdrawn 6 months later.
     
    std tank likes this.
  17. LMS2968

    LMS2968 Part of the furniture

    Joined:
    Sep 1, 2006
    Messages:
    2,987
    Likes Received:
    5,084
    Gender:
    Male
    Occupation:
    Lecturer retired: Archivist of Stanier Mogul Fund
    Location:
    Wigan
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The bearings were not split and this did cause problems in assembling the built up parts of the axle. The female parts were heated to give expansion, and a system of blowing air through the bearing was needed to prevent its overheating.
     
    jnc likes this.
  18. class8mikado

    class8mikado Part of the furniture

    Joined:
    Jun 1, 2009
    Messages:
    3,610
    Likes Received:
    1,438
    Occupation:
    Print Estimator/ Repository of Useless Informatio.
    Location:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
     

Share This Page