If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Things that seemed a good idea at the time, but in practice are pretty useless.

Discussion in 'Steam Traction' started by Eightpot, Oct 3, 2019.

  1. 8126

    8126 Member

    Joined:
    Mar 17, 2014
    Messages:
    823
    Likes Received:
    962
    Gender:
    Male
    Not sure that's strictly true. Post-war, the big Bristol Centaurus radials were more successful in civil aircraft than the Rolls Royce V12s, precisely because the time between overhauls was greater (figures seem to vary, but <1000hrs for Merlins, and >2000hrs for Bristol radials). That there are still Merlins aplenty going now, and vanishingly few sleeve valve radials, I would attribute to the relatively conventional nature of the Merlin and its requirements, compared to the specialised and now highly unusual nature of a sleeve valve engine.

    None of that changes the fact that one of the most appealing advantages of the sleeve valve for IC engines (knock resistance) was completely absent in steam engine practice. It's also interesting that Paget's attempt was going to have single-acting cylinders, as with IC engines, which would definitely have made getting the lubrication right easier.
     
  2. paulhitch

    paulhitch Guest

    Sorry but this has nothing to do with "early Rolls-Royce car engines" which was the subject of your original posting. Sir Henry had been dead for around ten years before this particular unit, which seems never to have entered actual service, was brought out.
     
    Last edited by a moderator: Oct 11, 2019
  3. ross

    ross Well-Known Member

    Joined:
    May 18, 2017
    Messages:
    1,002
    Likes Received:
    2,477
    Gender:
    Male
    Location:
    Titfield
    Heritage Railway Volunteer:
    No I do not currently volunteer
    paulhitch likes this.
  4. Spamcan81

    Spamcan81 Nat Pres stalwart

    Joined:
    Aug 25, 2007
    Messages:
    35,121
    Likes Received:
    20,772
    Occupation:
    Training moles
    Location:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Indeed so but not all of them would have been Sumpies. An aircraft needed many different trades to keep it in the air.
     
  5. LesterBrown

    LesterBrown Member

    Joined:
    Jan 20, 2009
    Messages:
    995
    Likes Received:
    761
    Location:
    Devon
    But IIRC the problem with the uniflow Paget engine was with uneven thermal expansion because one end of the cylinder was hotter than the other leading to it seizing.
     
  6. jnc

    jnc Well-Known Member

    Joined:
    Apr 3, 2012
    Messages:
    1,511
    Likes Received:
    2,706
    Gender:
    Male
    Location:
    Western Atlantic
    Heritage Railway Volunteer:
    No I do not currently volunteer
    The Merlin was used to power a lot of fairly iconic aircraft (Hurricanes, early Spitfires [the later ones used Griffons] , Mustangs [their Packards are US-built-Merlins], Mosquitos, Lancasters) and that surely has been an influence too.

    Noel
     
  7. RalphW

    RalphW Nat Pres stalwart Staff Member Administrator Friend

    Joined:
    Sep 11, 2005
    Messages:
    35,445
    Likes Received:
    9,143
    Gender:
    Male
    Occupation:
    Retired-ish, Part time rail tour steward.
    Location:
    Northwich
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Maybe so but it illustrates that the sleeve valve was not the complete design failure alluded to by the OP who bought it up.
     
  8. Jimc

    Jimc Part of the furniture

    Joined:
    Sep 8, 2005
    Messages:
    4,052
    Likes Received:
    4,665
    Occupation:
    Once computers, now part time writer I suppose.
    Location:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    There are a reasonable number of active Sea Furies with Centaurus engines. Given the high quality maintenance that the warbirds get its clear that the technology is more than viable in that environment. And I wouldn't disagree with the premise that very high performance poppet valve engines like the Merlin and Griffon require a similar level of capability in the shop.

    However we also know that much lower performance poppet valve diesel engines did not initially do well in the railway environment, and it took some time for things to improve. Its an interesting contrast between Maunsell's approach to the radical compression condensing Anderson principle with extended trials of a prototype, and Bulleid's rather bull at a gate approach with 5 ordered off the drawing board.
     
    Jamessquared likes this.
  9. 8126

    8126 Member

    Joined:
    Mar 17, 2014
    Messages:
    823
    Likes Received:
    962
    Gender:
    Male
    I think that is a very concise illustration of the difference between two personalities, but also between their circumstances. Maunsell put Lord Nelson through extended trials as well before ordering more, something we would now consider an almost wholly conventional machine, and perhaps got fewer built as a result (thinking of the truncated third order). Bulleid, on the other hand, took an "Order enough and they'll have to use them," approach to forcing novelty on the unconvinced, which was fine when it worked...

    In the '20s and '30s Maunsell had time, but steadily reducing funds for serious investment in the fleet. Anything radical was going to have to be well proven before spending money on it. Whereas Bulleid was evidently quite successful in getting his projects funded, but seemed to know, particularly by the time Leader came around, that his time was running out. Whether or not nationalisation was in the wind, he turned 63 the year the war ended.
     
  10. Spamcan81

    Spamcan81 Nat Pres stalwart

    Joined:
    Aug 25, 2007
    Messages:
    35,121
    Likes Received:
    20,772
    Occupation:
    Training moles
    Location:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The number of active Merlin engines still around is due to the number of surviving warbirds powered by them. If a similar number of Centaurus powered machines were discovered lurking in a cave, the warbird community would snap them up and the numerical superiority of the Merlin would not be as great.
     
    andrewshimmin likes this.
  11. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,100
    Likes Received:
    57,416
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    It's notable that in Holcroft, Maunsell had a technical assistant who was well suited to - and clearly enjoyed - the task of running extended experimental trials on locomotives. One of the striking things in Holcroft's book is how little he says about the period under Bulleid. (He left the SR in 1946, so before the Leader though by then the Q1s and both types of pacific had been introduced). I believe a lot of his time was taken up co-ordinating the SR workshop's response to the war effort, but it seems Bulleid was either unable or unwilling to use Holcroft in the same way that Maunsell was able. It's particularly interesting that in some ways, Bulleid's role on the LNER under Gresley was not dissimilar to Holcroft under Maunsell on the SR, but when Bulleid became CME, he didn't use, or recruit, a similar technical assistant to the same degree.

    I think your point about Bulleid increasingly being aware of the passing of time is well made. Maunsell was still in his mid 40s when he became CME at Ashford (following two years as CME at Inchicore); Gresley was in his mid 30s when he took over at Doncaster and still under 50 at the formation of the LNER, by which time he already had 12 years at the top of the GNR. By contrast, Bulleid was already 55 when he finally got his chance at "the top job", as it were.

    Tom
     
    andrewshimmin likes this.
  12. simon

    simon Resident of Nat Pres

    Joined:
    Jun 26, 2006
    Messages:
    11,567
    Likes Received:
    5,224
    At the time the ship was specified there were few if any known coal reserves in Australia - hence why the ship was specified to be capable of carrying them. If the coal reserves had been known about, there would have been no need to export coal Australia from the UK.
     
  13. andrewtoplis

    andrewtoplis Well-Known Member

    Joined:
    Mar 28, 2006
    Messages:
    1,357
    Likes Received:
    816
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    One of the first railways in New Zealand used extra wide wheels that ran on flat wooden track. The train was kept in place by guide wheels that acted on the inside edge of the 'rail'. Advantages were the cheapness of wood in New Zealand, disadvantages were that in the wet the engines slipped so badly the opening train had to be abandoned and passengers walked home after mud was walked onto the rails...

    It was soon converted...
     
    240P15 likes this.
  14. Eightpot

    Eightpot Resident of Nat Pres Friend

    Joined:
    Aug 10, 2006
    Messages:
    8,077
    Likes Received:
    2,264
    Gender:
    Male
    Occupation:
    Engineer Emeritus
    Location:
    Aylesbury
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Mr. Bulleid fitting the less than satisfactory LSWR steam reverser to his loco when he could have fitted the far better SE&CR type.
     
    Last edited: Oct 15, 2019
    andrewshimmin likes this.
  15. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,100
    Likes Received:
    57,416
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    We've been over that point numerous times, and it isn't true, though seems to have acquired urban myth status. The reverser fitted was an SR type, which had features derived form both the LSWR and Stirling (SE&CR) pattern reversers, but was not identical to either.

    Tom
     
    BrightonBaltic and andrewshimmin like this.
  16. Dunfanaghy Road

    Dunfanaghy Road Well-Known Member

    Joined:
    Oct 9, 2019
    Messages:
    1,252
    Likes Received:
    1,566
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Alton, Hants
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Was this an example of 'Prosser's Patent Guide-wheel Railway'? I've just read about it in Dendy Marshall. Weird, even by the standards of the 1840's.
    Pat
     
    LesterBrown likes this.
  17. LesterBrown

    LesterBrown Member

    Joined:
    Jan 20, 2009
    Messages:
    995
    Likes Received:
    761
    Location:
    Devon
    http://the-lothians.blogspot.com/2013/06/the-saga-of-southlands-wooden-railway.html?m=1
     
    Miff and Jamessquared like this.
  18. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,100
    Likes Received:
    57,416
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    ross likes this.
  19. andrewtoplis

    andrewtoplis Well-Known Member

    Joined:
    Mar 28, 2006
    Messages:
    1,357
    Likes Received:
    816
    Heritage Railway Volunteer:
    Yes I am an active volunteer
  20. Martin Perry

    Martin Perry Nat Pres stalwart Staff Member Moderator Friend

    Joined:
    Apr 15, 2006
    Messages:
    16,510
    Likes Received:
    7,753
    Location:
    1012 / 60158
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    In Britain maybe; in the US, the EMD-powered locmotives worked pretty well from the outset.
     

Share This Page