If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Gresham and craven no6 injector

本贴由 PaulH80 于 2019-12-08 发布. 版块名称: Narrow Gauge Railways

  1. PaulH80

    PaulH80 New Member

    注册日期:
    2019-12-08
    帖子:
    4
    支持:
    0
    性别:
    男
    所在地:
    Hampshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Anybody have a gresham and craven no6 injector or any drawings.
     
    PaulH80, 2019-12-08
    #1
  2. CymruGarratt

    CymruGarratt New Member

    注册日期:
    2008-03-20
    帖子:
    71
    支持:
    13
    No, but try the Steam traction section of this Forum
     
    CymruGarratt, 2019-12-08
    #2
  3. JWKB

    JWKB Member

    注册日期:
    2005-04-17
    帖子:
    421
    支持:
    95
    Backhead mounted ?
     
    JWKB, 2019-12-08
    #3
  4. Baldopeter

    Baldopeter New Member

    注册日期:
    2009-08-30
    帖子:
    93
    支持:
    15
    所在地:
    Lincolnshire
    There is a 4 and 5 or 5 and 6, (I am not sure which pair it is ) Gresham backhead injectors on K1, now at Statfold.
     
    Baldopeter, 2019-12-09
    #4
  5. PaulH80

    PaulH80 New Member

    注册日期:
    2019-12-08
    帖子:
    4
    支持:
    0
    性别:
    男
    所在地:
    Hampshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    20191208_170336.jpg
     
    PaulH80, 2019-12-09
    #5
  6. mikehartuk

    mikehartuk New Member

    注册日期:
    2007-06-29
    帖子:
    107
    支持:
    515
    性别:
    男
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The photo shows an injector with an integral water supply plug cock valve and inlet water filter directly behind its oval mounting flange. So I would suggest thats a water tank, not boiler backhead, mounted injector. Hope that helps
     
    Last edited: 2019-12-10
    mikehartuk, 2019-12-10
    #6
  7. PaulH80

    PaulH80 New Member

    注册日期:
    2019-12-08
    帖子:
    4
    支持:
    0
    性别:
    男
    所在地:
    Hampshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Yes water tank mounted.
     
    PaulH80, 2019-12-10
    #7
  8. mikehartuk

    mikehartuk New Member

    注册日期:
    2007-06-29
    帖子:
    107
    支持:
    515
    性别:
    男
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Thanks. Two foot gauge Hunslet Jerry M's drivers side injector I guess!
     
    mikehartuk, 2019-12-10
    #8
  9. PaulH80

    PaulH80 New Member

    注册日期:
    2019-12-08
    帖子:
    4
    支持:
    0
    性别:
    男
    所在地:
    Hampshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Pic is indeed JERRY M driver side injector.
     
    PaulH80, 2019-12-10
    #9
  10. ross

    ross Well-Known Member

    注册日期:
    2017-05-18
    帖子:
    1,002
    支持:
    2,477
    性别:
    男
    所在地:
    Titfield
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Might be worth giving Mr Bowman a shout down at Launceston.
     
    ross, 2019-12-10
    #10
  11. mikehartuk

    mikehartuk New Member

    注册日期:
    2007-06-29
    帖子:
    107
    支持:
    515
    性别:
    男
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I'm sure others may have access to much more detailed drawings. All I can find is this drawing - for a G&C No 9. Its of course bigger than yours but, apart from the outlet flange position, much the same internal layout I believe. If you've got issues with your injector Barry Gambles of South Coast Steam is just down the road from you and has patterns plus perhaps spares in stock
     

    附件文件:

    Last edited: 2019-12-12
    mikehartuk, 2019-12-11
    #11

分享此页面