If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Shortening a PMV underframe

Тема в разделе 'Heritage Rolling Stock', создана пользователем Steve, 25 фев 2021.

  1. Steve

    Steve Resident of Nat Pres Friend

    Дата регистрации:
    7 окт 2006
    Сообщения:
    12.813
    Симпатии:
    12.009
    Род занятий:
    Gentleman of leisure, nowadays
    Адрес:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Has anyone on here any experience of doing this or, indeed, any other steel underframe. Looking for procedures, design details or anything relevant for an organisation wanting to do this.
     
    Steve, 25 фев 2021
    #1
  2. gwalkeriow

    gwalkeriow Well-Known Member

    Дата регистрации:
    17 авг 2009
    Сообщения:
    1.717
    Симпатии:
    1.744
    Пол:
    Мужской
    Род занятий:
    Retired.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Yes I personally have assisted in the production of shortened two PMV underframes to our set procedure, five more had been done on previous occasions.
     
    Last edited: 25 фев 2021
    gwalkeriow, 25 фев 2021
    #2
  3. Steve

    Steve Resident of Nat Pres Friend

    Дата регистрации:
    7 окт 2006
    Сообщения:
    12.813
    Симпатии:
    12.009
    Род занятий:
    Gentleman of leisure, nowadays
    Адрес:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Thanks. I'll PM you.
     
    Steve, 25 фев 2021
    #3
  4. dlaiow

    dlaiow New Member

    Дата регистрации:
    14 дек 2012
    Сообщения:
    60
    Симпатии:
    106
    Пол:
    Мужской
    Адрес:
    Cricklade
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    dlaiow, 25 фев 2021
    #4

Поделиться этой страницей