If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

66xx no.6695

Discussion in 'Steam Traction' started by Nigel Clark, Nov 13, 2009.

  1. Jimc

    Jimc Part of the furniture

    Joined:
    Sep 8, 2005
    Messages:
    4,052
    Likes Received:
    4,665
    Occupation:
    Once computers, now part time writer I suppose.
    Location:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Isn't it very rare that we get to hear what the designers were thinking? What we do know is, like a number of other designs, the 56 was very much an update of an existing design rather than a clean sheet of paper. It was based around Rhymney Railway 0-6-2Ts, but updated with GWR boiler and fitting, piston valves and an all new valve gear design and GWR standard wheels etc. There was a glitch in the early days though. The RR locomotives had a longer wheelbase (7'3" + 8'0") than most other Welsh 0-6-2T classes and as a result they were given a generous amount of side play in the wheels. Enough, in fact, that some even had a vertical joint in the coupling rods. The first 56s, however, it seems were turned out with standard GWR clearances, and the result, we are told, was a rash of axlebox trouble.
     
  2. Steve

    Steve Resident of Nat Pres Friend

    Joined:
    Oct 7, 2006
    Messages:
    11,930
    Likes Received:
    10,088
    Occupation:
    Gentleman of leisure, nowadays
    Location:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    How can you argue that it was based on a Rhymney Railway loco when it had a different boiler, fittings, cylinders , motion, axleboxes and wheels and, by inference, different frames. About the only similarity was that it was an 0-6-2 and used coal as a fuel.
     
    2392 likes this.
  3. Jimc

    Jimc Part of the furniture

    Joined:
    Sep 8, 2005
    Messages:
    4,052
    Likes Received:
    4,665
    Occupation:
    Once computers, now part time writer I suppose.
    Location:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Oh I think perhaps a little more similarity than that. Here is the R Class post WW1, the R class as reboilered by GWR, and the 56xx. I don't find it hard to see a family resemblance. In particular the wheelbase was identical, and quite different to other Welsh 0-6-sTs like the Barry Class B which is the 4th image.

    R ar.jpg
    r2.jpg
    56.jpg
    bb.jpg
     
    S.A.C. Martin, Greenway, mgl and 5 others like this.
  4. MellishR

    MellishR Resident of Nat Pres Friend

    Joined:
    Apr 16, 2009
    Messages:
    8,068
    Likes Received:
    5,164
    The second and third pictures make an especially interesting comparison, the Swindon boiler on the Rhymney loco having a significantly shorter smokebox than the one on the 5600.
     
    Richard Roper likes this.
  5. 8126

    8126 Member

    Joined:
    Mar 17, 2014
    Messages:
    823
    Likes Received:
    962
    Gender:
    Male
    Obviously had grandfather rights for non-compliance with GWR ergonomic standards.
     
  6. Maunsell907

    Maunsell907 Member

    Joined:
    Nov 4, 2013
    Messages:
    881
    Likes Received:
    1,965
    Gender:
    Male
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I am always careful when commenting on GWR locos having not been issued with
    the requisite rose coloured spectacles :)

    My understanding is the 56xx were designed in a hurry to meet an urgent need;
    200 built within 2 years. No more, often attributed to the success of the 57xx 0-6-0 PTs
    which could navigate tighter curves than the 56xx. ( which if true rather negates the
    requirement for a more powerful loco design )

    The 56xx design was essentially a Rhymney Railway Class A and R with a standard
    GWR No.2 boiler. Although the intent I believe was for all the more modern Rhymney
    0-6-2s to be given the No.2 boiler when replacement due, in practice only three were so
    treated. Despite that one Rhymney loco had had an extensive rebuild at Swindon.
    Twenty six Rhymney locos were subsequently rebuilt with the Standard No.10 which
    had a barrel length of 10’3” and firebox length of 6’ 0”compared with No. 2, 11’ 0” and 7’0”

    (The respective grate and heating surface areas reflected the smaller boiler, Also as a note
    Taff Vale 0-6-2 tanks were rebuilt with Standard No.3, which had a 10’3”” long barrel aligned
    with a 7’0”” long firebox. )

    The 56xx had a poor reputation wrt rough riding and were hard on the track. I doubt the
    difficulty of removing ash from the firebox was of major concern in 1926. The weight
    distribution was poor ( if memory correct ) and very high on the rear coupled wheels, they
    were red route restricted.

    With hindsight it seems Swindon was in too much of a hurry to withdraw and replace many former
    South Wales Railway Companies’ locos. More time in the design office might have produced a better
    piece of kit. But the 56xx had a long and useful life.

    Regarding why not a 2-6-2 ? The 0-6-2 configuration had evolved, was considered good and
    appropriate to ‘Valleys’ operations on the curves and heavy gradients.

    Michael Rowe
     
    Last edited: Mar 18, 2022
    Richard Roper likes this.
  7. Steve

    Steve Resident of Nat Pres Friend

    Joined:
    Oct 7, 2006
    Messages:
    11,930
    Likes Received:
    10,088
    Occupation:
    Gentleman of leisure, nowadays
    Location:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Well, I've studied your drawings and I'm still inclined to the view that a Rhymney class R and a 56XX are hardly similar, except in wheel arrangement and wheelbase. in fact, apart from the wheels and, I assume cylinders and valve gear, I can't see much in common between the Rhymney loco and its rebuilt and reboilered version. Not even sure if the frameplates were retained.
     
  8. bluetrain

    bluetrain Well-Known Member

    Joined:
    Mar 3, 2019
    Messages:
    1,326
    Likes Received:
    1,460
    Gender:
    Male
    Location:
    Wiltshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I don't think the Std No 10 boiler was introduced until 1930, for the 2251 class 0-6-0. But the Std No 3 already existed in 1924 (introduced by Churchward for the 36XX 2-4-2T) and would seem to have been an option for Collett when the 56XX was designed. The 9-inch shorter barrel could have slightly eased the 56XX smokebox cleaning issue and reduced weight at the front end, although possibly not by enough to avoid the Red route restriction.
     
  9. Maunsell907

    Maunsell907 Member

    Joined:
    Nov 4, 2013
    Messages:
    881
    Likes Received:
    1,965
    Gender:
    Male
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Agreed, hence my comments “ more time in the design office “. The No.3 is in effect I think a No.2 with
    a shorter barrel but incorporating the No.2 firebox. ( both 36xx and some 33xx )

    Michael Rowe.
     
    Last edited: Mar 18, 2022
  10. brennan

    brennan Member

    Joined:
    Sep 11, 2016
    Messages:
    242
    Likes Received:
    294
    Location:
    Gloucester
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I have read somewhere, unfortunately I can't find the reference, that after the grouping Swindon sent it's inspectors to survey the loco stock of the Welsh railways and there were adverse reports about the condition , particularly of the boilers. Some rapid action was required and it made more sense to built something that sort of fitted into the GWR standard range of locos rather than spend a lot of time and money overhauling a range of designs that were for practical purposes worn out. Given some of the features of the 56xx class it looks to me as if the Swindon design office held some sort of a grudge against the Welsh enginemen and fitters!
     
  11. Jimc

    Jimc Part of the furniture

    Joined:
    Sep 8, 2005
    Messages:
    4,052
    Likes Received:
    4,665
    Occupation:
    Once computers, now part time writer I suppose.
    Location:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    My understanding is that the Rhymney was an exception when it came to Swindon's opinion of Welsh maintenance. The RR's works at Caerphilly were expanded and became one of the major factories.

    The later RR locomotive designs were a distinct family, with about 9 classes (roughly speaking - there was overlap and some conversions from one class to another) that can be divided into four groups, all with the same wheelbases:
    0-6-0Ts with 4'4.5 in wheels
    0-6-2Ts with 4'4.5 in driving wheels and smaller size boiler
    0-6-2Ts with 5'0 driving wheels and smaller size boiler
    0-6-2Ts with 4'6 wheels and larger size boiler.

    When given GWR boilers the larger boiler types got Std 2s and the rest Std 10s. The Std 10 boiler was developed for absorbed classes, along with the Std 9 and Std 11. They were all variations on existing Std boilers, with longer or shorter barrels and/or fireboxes. The RR had had quite a bit of trouble with boiler design before WW1, and many of their boilers were relatively new at the grouping , so my assumption is that they were able to keep enough boilers in good condition cheaply enough that there was no need to convert the whole fleet. I don't know what operational requirements brought a need for both 4.'4.5 wheels and smaller boiler 0-6-2Ts versus 4'6 wheels and larger boilered ones.
     
    Richard Roper and Bluenosejohn like this.
  12. Maunsell907

    Maunsell907 Member

    Joined:
    Nov 4, 2013
    Messages:
    881
    Likes Received:
    1,965
    Gender:
    Male
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    At the risk of being a pedant.

    The Nos 9 & 11 were standard domed ( not taper) boilers, with a 4 ft 5 inch diameter barrel, grate area 19.7sq.ft
    I think solely as replacements in South Wales and unique.

    Michael Rowe
     
    Last edited: Mar 19, 2022
  13. bluetrain

    bluetrain Well-Known Member

    Joined:
    Mar 3, 2019
    Messages:
    1,326
    Likes Received:
    1,460
    Gender:
    Male
    Location:
    Wiltshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    And then No 12 was for the King Class and No 14 for the Manor Class.

    But what was Std No 13? Something designed but never used?
     
  14. Jimc

    Jimc Part of the furniture

    Joined:
    Sep 8, 2005
    Messages:
    4,052
    Likes Received:
    4,665
    Occupation:
    Once computers, now part time writer I suppose.
    Location:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I'm not aware of a Standard 13. Standard 21, which came before the Standard 14, was a version of the Standard 11 with a drum head smokebox. The Standard 11 was a T class with a longer firebox, the T, AKA Metro, having been used on some 0-6-0T as well as the 2-4-0T Metros. The Standard 21 was the boiler for 54/64/74 classes.

    Std 15 was the 8F based boiler used on the 4-6-0 Counties, and Standard 16 was the small boiler used on the 16xx.

    There's some more data on the boilers on my GW boilers page https://www.devboats.co.uk/gwdrawings/gwrstandardboilers.php , including a list of those of the prefixes (sub classes) that survived into the 40s.
     
    Last edited: Mar 19, 2022
    Copper-capped likes this.
  15. Maunsell907

    Maunsell907 Member

    Joined:
    Nov 4, 2013
    Messages:
    881
    Likes Received:
    1,965
    Gender:
    Male
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Low p.288 lists
    Nos 8, 10, 12, 14 & 15 as standard taper boilers.

    Nos 9, 16 & 21 as standard domed boilers.

    He lists the 60xx boiler with 4. row superheater between 12 and 14 but without a number ?

    Answers on a postcard ?

    Michael Rowe,
     
    bluetrain likes this.
  16. Jimc

    Jimc Part of the furniture

    Joined:
    Sep 8, 2005
    Messages:
    4,052
    Likes Received:
    4,665
    Occupation:
    Once computers, now part time writer I suppose.
    Location:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I've recently seen an original WR document that classified the 4 row King boiler as Std 12, prefix WB.

    Jim C
     
  17. Biggles633

    Biggles633 New Member

    Joined:
    May 9, 2014
    Messages:
    54
    Likes Received:
    28
    Gender:
    Male
    Occupation:
    Gas Engineer
    Location:
    Swindon
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Never had a problem oiling one or cleaning the smokebox.
    Mind you I have not hit middle age yet.........................
     
  18. Azrall

    Azrall Member

    Joined:
    May 2, 2013
    Messages:
    205
    Likes Received:
    491
    Gender:
    Male
    Occupation:
    Commercial Manager
    Location:
    Swindon
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    This Easter Bank Holiday saw a huge push on 6695's progres at the S&CR with most of the Loco cladding fitted, the next few weeks will see this finished up and painted in undercoat ready for the eventual move to the paint shop at the loco shed in Hayes Knoll.

    Pictures below:
    [​IMG]


    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  19. ruddingtonrsh56

    ruddingtonrsh56 Member

    Joined:
    Sep 14, 2009
    Messages:
    979
    Likes Received:
    1,470
    Gender:
    Male
    Location:
    Nottinghamshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Looking nice. I'll be the one to ask - which livery is she going to be painted in this time around?
     
  20. Azrall

    Azrall Member

    Joined:
    May 2, 2013
    Messages:
    205
    Likes Received:
    491
    Gender:
    Male
    Occupation:
    Commercial Manager
    Location:
    Swindon
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I don't know off the top of my head but it'll be GWR this time and not BR as far as I recall.
     

Share This Page