If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

BR Standard class 6 No. 72010 'Hengist' and Clan Discussion Thread

Discussion in 'Steam Traction' started by Bulleid Pacific, Nov 23, 2009.

  1. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,103
    Likes Received:
    57,432
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I'll look next time ... but define "section". Do you mean the gross shape of the spring, or a slice through the material making up the spring? Hence in my images above - are you saying they are trying to make something that looks like the top image, or the bottom one?

    Tom
     
  2. osprey

    osprey Resident of Nat Pres

    Joined:
    Oct 3, 2007
    Messages:
    9,357
    Likes Received:
    2,313
    Occupation:
    semi-retired, currently doing R&D for my patents
    Location:
    Halifax
    Love the wobbly bit...always made me smile...
     
  3. Dave Williams

    Dave Williams New Member

    Joined:
    Mar 29, 2021
    Messages:
    23
    Likes Received:
    26
    Gender:
    Male
    Location:
    Devon
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I believe it is called Timms section.
     
  4. northernsteam

    northernsteam Member

    Joined:
    May 25, 2010
    Messages:
    593
    Likes Received:
    271
    Gender:
    Male
    Occupation:
    Used to be in civil engineering, highway bridges.
    Location:
    Tyne and Wear
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    It's the top one James. Check out the bogie build section of the Hengist/ Clan website.
     
  5. 30854

    30854 Resident of Nat Pres

    Joined:
    Mar 8, 2017
    Messages:
    12,172
    Likes Received:
    11,493
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Brighton&Hove
    Heritage Railway Volunteer:
    No I do not currently volunteer
    If circumstances permit Tom, please don't forget to grab a few photos. I was also thinking along the lines of the photo you posted.
     
  6. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,103
    Likes Received:
    57,432
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Which is what I thought - hence not understanding @std tank reply saying “no” …

    Tom
     
    MellishR and flying scotsman123 like this.
  7. std tank

    std tank Part of the furniture

    Joined:
    Sep 20, 2005
    Messages:
    3,808
    Likes Received:
    946
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Liverpool
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The top image is a square section spring. This can still be made and is used in some safety valves. You will see the difference when you look at one of the bogies mentioned. Oh, I forgot to mention Camelot's bogie.
     
  8. std tank

    std tank Part of the furniture

    Joined:
    Sep 20, 2005
    Messages:
    3,808
    Likes Received:
    946
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Liverpool
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The top one is a square section spring. This can still be made and is used in some safety valves.
     
  9. Hermod

    Hermod Member

    Joined:
    May 6, 2017
    Messages:
    985
    Likes Received:
    283
    Gender:
    Male
    Location:
    Klitmoeller,Denmark
    Heritage Railway Volunteer:
    No I do not currently volunteer
    My hero( mr Webb )had driving wheels cast centrifugal in steel.
    These springs will be piece of cake and X ray and ultrasonic control not impossible
     
    andrewshimmin likes this.
  10. RLinkinS

    RLinkinS Member

    Joined:
    Nov 8, 2008
    Messages:
    912
    Likes Received:
    928
    Gender:
    Male
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    If Mr Webb had been able to cast satisfactory springs in steel he would have done it. The fact that he did not tells us that it cannot be done because the metallurgy of cast steel is not suitable for springs. I am sure he knew that and we should be guided by his example

    Sent from my SM-A105FN using Tapatalk
     
    ghost, osprey and Jamessquared like this.
  11. Cosmo Bonsor

    Cosmo Bonsor Member

    Joined:
    Dec 10, 2014
    Messages:
    221
    Likes Received:
    500
    Gender:
    Male
    Heritage Railway Volunteer:
    Yes I am an active volunteer
  12. ianh1

    ianh1 Member

    Joined:
    May 10, 2018
    Messages:
    218
    Likes Received:
    673
    Gender:
    Male
    Location:
    Cumbria
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    As you can see from the extract from SL/DE/19544, the bogie side check spring is flat rectangular section

    Bogie Spring.JPG
     
    RLinkinS likes this.
  13. osprey

    osprey Resident of Nat Pres

    Joined:
    Oct 3, 2007
    Messages:
    9,357
    Likes Received:
    2,313
    Occupation:
    semi-retired, currently doing R&D for my patents
    Location:
    Halifax
    Very interesting. My gut instinct tells me that this type of spring gives a damping kind of influence that a coil spring would'nt. Correct me if I'm wrong?
     
  14. class8mikado

    class8mikado Part of the furniture

    Joined:
    Jun 1, 2009
    Messages:
    3,610
    Likes Received:
    1,438
    Occupation:
    Print Estimator/ Repository of Useless Informatio.
    Location:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Wondered if the flat faces give the spring stability if the compression ' bottoms out' ?
     
  15. Ploughman

    Ploughman Part of the furniture

    Joined:
    Apr 1, 2008
    Messages:
    5,806
    Likes Received:
    2,649
    Occupation:
    Ex a lot of things.
    Location:
    Near where the 3 Ridings meet
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    We have this section of steel in our 40t WELTROL bogies.
    2 springs nested and of opposite coiling to each other per wheel set.
    One of the smaller inner nested springs was found to be broken and not economical to renew with square section.
    So, following advice we replaced it with round section.
    Bearing in mind the realistic potential use, speed and amount of movements this wagon is likely to make.
     
  16. ianh1

    ianh1 Member

    Joined:
    May 10, 2018
    Messages:
    218
    Likes Received:
    673
    Gender:
    Male
    Location:
    Cumbria
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    We have got an alternative design of a inner/outer round section spring solution. If we went down that route we would need Vampire testing. The bogie side control springs can be fitted at any time so we're not in a hurry to go down that route and will continue searching for now.

    Osprey - as you can read in our Construction > Bogie section, E.S. Cox concludes by saying that "only a combination of stronger side control springs plus appropriate damping could give the desired result".

    The damping is provided by the Ferobestos pads on the bottom of the bogie bolster cups. These sit on top of grease lubricated brass pads. The original 1951 BR Instruction Manual shows that these pads were grease lubricated
     
  17. 8126

    8126 Member

    Joined:
    Mar 17, 2014
    Messages:
    823
    Likes Received:
    962
    Gender:
    Male
    Not really. It still behaves exactly like a conventional round wire coil springs in its basic behaviour. Mostly, it's a way of getting a shorter spring (both free and fully compressed) for a given set of characteristics.

    All coil springs are basically torsion bars wrapped into a helix, so the wire is twisted rather than bent like the leaves of a leaf spring. Round wire is fundamentally the most efficient solid shape for coil springs - you get the highest proportion of the material at your limiting stress and the maximum stiffness for a given material cross section (so you can have less of it). But if you've got a design operating in a fixed envelope, that just needs to be that bit stronger, or that bit stiffer, or that bit shorter, the most efficient spring may not be the best choice. You can make the windings square or rectangular and stiffen them without changing the turn-to-turn pitch, or you can close up the pitch but maintain the same gap between turns.
     
    Sunnieboy likes this.
  18. 30854

    30854 Resident of Nat Pres

    Joined:
    Mar 8, 2017
    Messages:
    12,172
    Likes Received:
    11,493
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Brighton&Hove
    Heritage Railway Volunteer:
    No I do not currently volunteer
    That sounds ominously like the sort of trade name used for products containing asbestos. Could anyone please clarify?
     
    Richard Roper likes this.
  19. MellishR

    MellishR Resident of Nat Pres Friend

    Joined:
    Apr 16, 2009
    Messages:
    8,068
    Likes Received:
    5,165
    and yet
    Vampire testing would take account of numerous variables and parameters. If everything apart from the spring will be exactly the same as on the original, and the inner and outer springs together would have the same characteristics as the original square-section spring, it's hard to see how the behaviour could be different. Whether the behaviour of the original design was ideal in all respects is different question.
     
  20. 5944

    5944 Resident of Nat Pres

    Joined:
    Jan 14, 2006
    Messages:
    8,032
    Likes Received:
    7,607
    Gender:
    Male
    Occupation:
    Train Maintainer for GTR at Hornsey
    Location:
    Letchworth
    Heritage Railway Volunteer:
    No I do not currently volunteer
    No, at least not any more. It's a fibre reinforced resin, used as a frictionless, hard-wearing surface. It's still used quite a bit in the rail industry. The cab front corridor connections on modern units have it, so when they're coupled together the corridors slide rather than bind. Bottom of sliding doors is another location.
     
    30854 and Sheff like this.

Share This Page