If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

V2 4771 green arrow to return?

Discussion in 'Steam Traction' started by Davo, Mar 22, 2019.

  1. std tank

    std tank Part of the furniture

    Joined:
    Sep 20, 2005
    Messages:
    3,808
    Likes Received:
    946
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Liverpool
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    At the present time it is a 1 off loco with a 1 off monoblock casting.
     
  2. S.A.C. Martin

    S.A.C. Martin Part of the furniture

    Joined:
    Aug 31, 2010
    Messages:
    5,591
    Likes Received:
    9,325
    Gender:
    Male
    Occupation:
    Asset Engineer (Signalling), MNLPS Treasurer
    Location:
    London
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    To be pedantic, a “single surviving locomotive with a single surviving monobloc” would be more accurate.
     
    Last edited: Sep 26, 2022
    green five, Richard Roper and 30854 like this.
  3. std tank

    std tank Part of the furniture

    Joined:
    Sep 20, 2005
    Messages:
    3,808
    Likes Received:
    946
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Liverpool
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    That is my engineering background coming out.
    Query-Where the K3s and O2s fitted with monoloc castings?
     
  4. Hirn

    Hirn Member

    Joined:
    Aug 11, 2015
    Messages:
    462
    Likes Received:
    295
    Gender:
    Male
     
  5. Hirn

    Hirn Member

    Joined:
    Aug 11, 2015
    Messages:
    462
    Likes Received:
    295
    Gender:
    Male
    Is there some sort of lacuna in my knowledge: "a surging monobloc"?
    Not sure it is something to do with a foundry pouring/teeming the metal from the ladle into the mould.
     
    Richard Roper likes this.
  6. Richard Roper

    Richard Roper Well-Known Member

    Joined:
    May 22, 2006
    Messages:
    1,310
    Likes Received:
    1,355
    Gender:
    Male
    Occupation:
    Librarian
    Location:
    Just up the road from 56E Sowerby Bridge
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I think it's an auto-correct.... Should be "surviving".

    Richard.
     
    Hirn and S.A.C. Martin like this.
  7. S.A.C. Martin

    S.A.C. Martin Part of the furniture

    Joined:
    Aug 31, 2010
    Messages:
    5,591
    Likes Received:
    9,325
    Gender:
    Male
    Occupation:
    Asset Engineer (Signalling), MNLPS Treasurer
    Location:
    London
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Yes - very much auto correct - will now amend!
     
    green five and Richard Roper like this.
  8. S.A.C. Martin

    S.A.C. Martin Part of the furniture

    Joined:
    Aug 31, 2010
    Messages:
    5,591
    Likes Received:
    9,325
    Gender:
    Male
    Occupation:
    Asset Engineer (Signalling), MNLPS Treasurer
    Location:
    London
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Good question. The answer according to my notes is no, they were separately fitted cylinders. The K3 had a very steeply inclined centre cylinder which probably negated the possibility of a monobloc at the time. I will check the RCTS green books when I get some time for a better answer.
     
    Richard Roper likes this.
  9. std tank

    std tank Part of the furniture

    Joined:
    Sep 20, 2005
    Messages:
    3,808
    Likes Received:
    946
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Liverpool
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Thanks.
     
  10. 8126

    8126 Member

    Joined:
    Mar 17, 2014
    Messages:
    823
    Likes Received:
    962
    Gender:
    Male
    It seems like nobody has quite answered your question. My take on it would be slightly different - it wasn't necessarily that Green Arrow was remarkable for having a monoblock per se. I don't actually know how many NER monoblocks were still around at the time Green Arrow was preserved, probably only the Q7s if they had them? The V2s were built with monoblocks, but by the time anyone thought to preserve one, quite a few didn't have them anymore. Problems with the monoblocks had led to them being replaced with separate cylinders on almost half of the V2s. However, Green Arrow did still have one.

    You'll notice that class pioneers are somewhat over-represented in the NRM, and also that at certain times there was perhaps a drive for apparent originality over authenticity (hence 251 probably having very few parts that were on 251 at the time of withdrawal, and more 'original' examples of some SR classes being preserved over the first in class). I think you can also make a fair argument that the V2 is up there with the A4 in the ranks of Gresley's most successful classes. So a V2 was to be preserved because if you're going to preserve a Gresley engine that isn't an A4, it's an obvious choice, not necessarily just because they had monoblocks. Green Arrow was the first member of the class, and in reasonably original condition where many of its classmates weren't.
     
  11. 242A1

    242A1 Well-Known Member

    Joined:
    Dec 3, 2006
    Messages:
    1,558
    Likes Received:
    1,299
    Three cylinders cast together in one monobloc casting was a N.E.R. practice and this was adopted by HNG for new designs where the arrangement of the front end, the disposition of the cylinders etc. permitted this. 2001 was built in 1934 and would be the first example of this practice since the O2 and K3 classes were in essence G.N.R designs even though they became Group Standard. The A1s again were G.N.R. and the disposition of the cylinders on this class continued through to the A4 and although this last design came out in 1935 there was little point in pursuing a monobloc in this class since this was a continuation of the development of the 1920 design and unlike the O2 and K3 the cylinder disposition was rather different to that to be found on the first of the passenger service Mikados.

    Of the other classes the B17 and D49 again did not have a suitable cylinder disposition but the V2 design, which was first ordered in 1935, met the adoption requirements. The V4 class were also fitted with a monobloc. The three cylinder Mogul and Consolidation designs did meet the requirement but predated it and the remaining 5 examples of the P2 class are referred to as having conventional cylinders.
     
  12. Eightpot

    Eightpot Resident of Nat Pres Friend

    Joined:
    Aug 10, 2006
    Messages:
    8,077
    Likes Received:
    2,264
    Gender:
    Male
    Occupation:
    Engineer Emeritus
    Location:
    Aylesbury
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    From a photo that I have it looks like the V1 2-6-2 tank locos had mono bloc cylinders.
     
  13. std tank

    std tank Part of the furniture

    Joined:
    Sep 20, 2005
    Messages:
    3,808
    Likes Received:
    946
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Liverpool
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    V1s were 2 cylinders. V3s were 3 cylinders.
     
  14. Spamcan81

    Spamcan81 Nat Pres stalwart

    Joined:
    Aug 25, 2007
    Messages:
    35,121
    Likes Received:
    20,773
    Occupation:
    Training moles
    Location:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Sorry but the V1 was a three cylinder design. The V3 was effectively an uprated V1.
     
  15. 242A1

    242A1 Well-Known Member

    Joined:
    Dec 3, 2006
    Messages:
    1,558
    Likes Received:
    1,299
    Yes, these three cylinder tank locomotives were also built with a monobloc. The design dates back to a proposal made in 1928 which steadily evolved from the original idea of a locomotive suitable to work over the widened lines of the Metropolitan Railway. The V1 first appeared in 1930 and 82 members of the class were built in batches up to 1939. The V3 first appeared in 1939. The cylinders were 16" x 26" producing a smaller block than that fitted to the V2 (and much smaller than that fitted to 2001).

    I do not have much information about the V1/V3 classes. We are aware of the cracking issues which had an impact on some of the V2s and I wonder if the smaller casting fitted to the less powerful tank locomotives gave less trouble or even no significant trouble. These engines appear to be the first LNER design fitted with a monobloc and if these were deemed a success then it goes some way to explain the confidence felt in fitting such cylinder blocks to other designs.
     
  16. 30854

    30854 Resident of Nat Pres

    Joined:
    Mar 8, 2017
    Messages:
    12,172
    Likes Received:
    11,493
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Brighton&Hove
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Apologies if this is a daft question or has been answered previously, but does 'cracking issues' refer to the monobloc casting or the frame on which it's mounted?
     
  17. 242A1

    242A1 Well-Known Member

    Joined:
    Dec 3, 2006
    Messages:
    1,558
    Likes Received:
    1,299
    In this instance the cylinder monobloc is being referred to. The frames on the V2 gave little trouble, we can carry out frame repairs and renewals if needed, the monobloc presented more of a problem though that is now solvable with a fabrication. There are those who would like to have the cast block removed from Green Arrow for a full assessment and inspection as part of an overhaul in order to discover the extent of what and where the problems lie. And dealing with the block in full isolation might allow more advanced repairs to be undertaken if this was found to be feasible.
     
  18. 30854

    30854 Resident of Nat Pres

    Joined:
    Mar 8, 2017
    Messages:
    12,172
    Likes Received:
    11,493
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Brighton&Hove
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I'd imagine today's better understanding of stress relief, coupled with CAD design and expanded moulding options moves things towards monobloc.

    Of interest, is experience with monoblocs, as employed by Blodge, applicable to SG locos ... and vice versa
     
  19. Jimc

    Jimc Part of the furniture

    Joined:
    Sep 8, 2005
    Messages:
    4,052
    Likes Received:
    4,665
    Occupation:
    Once computers, now part time writer I suppose.
    Location:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Absolutely. 'Originality' was just as much the fad in the 60s/early 70s as 'authenticity' is now. And doubtless the wheel will continue to revolve and old fashions will come back again.
     
  20. meeee

    meeee Member

    Joined:
    Mar 28, 2006
    Messages:
    864
    Likes Received:
    1,319
    CAD and polystyrene patterns aren't magic. They have their drawbacks and this would be a very large and complex casting. The physical capability and knowledge to actually get it right might not be there at a price that is affordable.

    The monoblock cylinders on the Festiniog whilst impressive are probably 1/3rd the size of a V2 one at the most. The difference in scale is huge. Whilst they haven't shown any major flaws so far, they did have a quite a major issue with the removal of casting sand. This lead to damaged liners and rings. So it goes to show how you can miss simple things.
     

Share This Page