If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Locomotive Performance and Tractive Effort Discussion

Discussion in 'Steam Traction' started by MellishR, Nov 26, 2022.

  1. MellishR

    MellishR Resident of Nat Pres Friend

    Joined:
    Apr 16, 2009
    Messages:
    8,069
    Likes Received:
    5,165
    Maximum indicated horsepower depends on how much steam the boiler can produce (over some specified time period) and how efficiently the cylinders can use it. As the P2's boiler will be the same as Tornado's, its maximum output should be the same, unless the draughting of either is sub-optimal. The poppet valves may allow the steam to be used slightly more efficiently.

    Going back to the Claughton, however, exactly the same philosophy could be applied as is being done for the P2. Build a new one, looking just like the originals but with a few design tweaks.
     
  2. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,103
    Likes Received:
    57,432
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Indeed, a 350hp diesel shunter of class 08 has about the same starting tractive effort than an A4 …

    Tom
     
  3. Cartman

    Cartman Well-Known Member Account Suspended

    Joined:
    Dec 14, 2015
    Messages:
    2,290
    Likes Received:
    1,672
    Gender:
    Male
    Occupation:
    Van driver
    Location:
    Cheshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    There's always Big Bertha too!
     
    LMS2968 likes this.
  4. The Green Howards

    The Green Howards Nat Pres stalwart

    Joined:
    Feb 20, 2016
    Messages:
    14,119
    Likes Received:
    7,644
    Occupation:
    Layabout
    Location:
    Naughty step
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Not this 'Bertha', one assumes... :D

    [​IMG]
     
  5. Cartman

    Cartman Well-Known Member Account Suspended

    Joined:
    Dec 14, 2015
    Messages:
    2,290
    Likes Received:
    1,672
    Gender:
    Male
    Occupation:
    Van driver
    Location:
    Cheshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    No, 22290, later 58100! it once had to rescue the U1 when it died on the Lickey
     
    LMS2968 likes this.
  6. class8mikado

    class8mikado Part of the furniture

    Joined:
    Jun 1, 2009
    Messages:
    3,610
    Likes Received:
    1,438
    Occupation:
    Print Estimator/ Repository of Useless Informatio.
    Location:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    All things being equal the amount of sustained output from these machines depends on how much energy coming from their identical grate areas is converted into steam by the boilers and converted into work by the engine. the big pro for the Duchess is its larger boiler may allow its output to exceed its input for slightly longer periods, The p2 may have a more efficient engine by virtue of its valve gear and draughting. A duchess may have its power 'sweetspot' at a higher speed, the P2 is less likely to loose its feet. But at the end of the day there isnt going to be much in it. Cant think that i have seen anything anywhere that suggests Tornado's boiler is an outstanding steam generator compared to say a Merchant or the Duke...
     
  7. 242A1

    242A1 Well-Known Member

    Joined:
    Dec 3, 2006
    Messages:
    1,558
    Likes Received:
    1,299
    The quality of the exhaust system is more important when all other factors are nominally equal. You point out the steam generation of Tornado and there is nothing to suggest that it cannot equal a MN, Duke or Princess Coronation if required to do so. The smaller boilers and significantly superior outputs of the French Chapelon compound Pacifics should tell you that improved SSC can easily overcome superior evaporation.
     
    Last edited: Nov 28, 2022
  8. 240P15

    240P15 Well-Known Member

    Joined:
    Dec 1, 2017
    Messages:
    1,598
    Likes Received:
    1,588
    Gender:
    Male
    Location:
    Norway
    Heritage Railway Volunteer:
    No I do not currently volunteer

    Child memories! :Happy:Thanks for posting it Green Howards.

    Knut:)
     
    The Green Howards likes this.
  9. 240P15

    240P15 Well-Known Member

    Joined:
    Dec 1, 2017
    Messages:
    1,598
    Likes Received:
    1,588
    Gender:
    Male
    Location:
    Norway
    Heritage Railway Volunteer:
    No I do not currently volunteer

    If i`m correct there was a similar statement in steam railway about the B.R. standard Clan class.
     
  10. Sheffield

    Sheffield New Member

    Joined:
    Aug 3, 2009
    Messages:
    55
    Likes Received:
    97
    I would have suggested that the South African Garratt in the Manchester museum is the most powerful loco in the UK at present.
     
  11. The Green Howards

    The Green Howards Nat Pres stalwart

    Joined:
    Feb 20, 2016
    Messages:
    14,119
    Likes Received:
    7,644
    Occupation:
    Layabout
    Location:
    Naughty step
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Is it operational?
     
    S.A.C. Martin likes this.
  12. Spamcan81

    Spamcan81 Nat Pres stalwart

    Joined:
    Aug 25, 2007
    Messages:
    35,121
    Likes Received:
    20,773
    Occupation:
    Training moles
    Location:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Nope. Stuffed and mounted as the saying goes.
     
  13. The Green Howards

    The Green Howards Nat Pres stalwart

    Joined:
    Feb 20, 2016
    Messages:
    14,119
    Likes Received:
    7,644
    Occupation:
    Layabout
    Location:
    Naughty step
    Heritage Railway Volunteer:
    No I do not currently volunteer
    It was a rhetorical question, to be fair - I saw it there twenty years ago so it's largely a moot point as to how powerful it is.

    Serious question: do we have facilities to test the power output of locomotives any more? I'm assuming we wouldn't be shoving people in a wooden box in front of the smokebox these days.
     
  14. MellishR

    MellishR Resident of Nat Pres Friend

    Joined:
    Apr 16, 2009
    Messages:
    8,069
    Likes Received:
    5,165
    Whereas the old dynamometer cars contained complicated mechanical gubbins, with modern instrumentation it shouldn't be too hard to install the necessary bits in an otherwise normal support coach. However I'm not sure how you could ensure that the tension in the coupling represents exactly the TE from the loco and no extra force countering residual pressure between the buffers.
     
  15. RLinkinS

    RLinkinS Member

    Joined:
    Nov 8, 2008
    Messages:
    912
    Likes Received:
    928
    Gender:
    Male
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    A steam engine indicator measures the position of the piston and the pressure in the cylinder. The two values are drawn onto a graph the graph line forms a loop. The power being developed is calculated from the area enclosed by the loop.

    If we wanted to do the same thing today we would fit pressure and position transducers to each cylinder to be indicated. They could probable be linked by wireless to a laptop. I expect the results recorded on a spreadsheet and the graph and input produced from this.

    I wonder if the men in the indicator took any other readings?

    Sent from my SM-A105FN using Tapatalk
     
    osprey, The Green Howards and LMS2968 like this.
  16. LMS2968

    LMS2968 Part of the furniture

    Joined:
    Sep 1, 2006
    Messages:
    2,987
    Likes Received:
    5,084
    Gender:
    Male
    Occupation:
    Lecturer retired: Archivist of Stanier Mogul Fund
    Location:
    Wigan
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I've done a bit of engine testing in a former life, admittedly internal combustion and not steam, but similar principles apply. It might not be realised that you can indicate a petrol or diesel engine, two- or four-stroke, but the results look very different to a steam diagram.
     
    The Green Howards likes this.
  17. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,103
    Likes Received:
    57,432
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I’d be quite interested if they’d taken regular heart rate readings!

    Tom
     
    240P15, torgormaig and Bluenosejohn like this.
  18. 8126

    8126 Member

    Joined:
    Mar 17, 2014
    Messages:
    823
    Likes Received:
    962
    Gender:
    Male
    I think it was H.G. Ivatt who discovered that he could happily smoke a pipe with his head above the top of the indicator shelter, because the bluff front typical of the classes he was on meant he was standing in a large stagnation region in the airflow. So I suspect his heart rate was reasonably under control.
     
    Bluenosejohn and Jamessquared like this.
  19. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,103
    Likes Received:
    57,432
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    They had such a lax attitude to health and safety in those days. Can you imagine nowadays being allowed to smoke while at work! ;)

    Tom
     
    Hirn, johnofwessex, MellishR and 8 others like this.
  20. 8126

    8126 Member

    Joined:
    Mar 17, 2014
    Messages:
    823
    Likes Received:
    962
    Gender:
    Male
    I don't know, some of the vapers I've seen would have people reporting significant front end steam leakage...
     
    Hirn, The Dainton Banker and LMS2968 like this.

Share This Page