If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Boiler heat resistant paint

Тема в разделе 'Locomotive Engineering M.I.C', создана пользователем JJF, 28 сен 2009.

  1. JJF

    JJF New Member

    Дата регистрации:
    20 июл 2008
    Сообщения:
    7
    Симпатии:
    0
    Адрес:
    Whitehead
    Hi,

    We're at the stage in a boiler overhaul where we're going to blast clean the exterior surfaces down imminently. With this in mind I'm keen to find out what sort of paint can be recommended for boilers. On one loco we overhauled about 8 years ago a silcone aluminium paint was used but sadly it doesn't seem to have stuck particularly well, coming off in flakes all over.

    Can anyone recommend a good boiler paint that they have had experience of? There are plenty of products out there but I have yet to see one that has remained attached for any length of time!

    Many thanks,

    James Friel
     
    JJF, 28 сен 2009
    #1
  2. Martin Perry

    Martin Perry Nat Pres stalwart Staff Member Moderator Friend

    Дата регистрации:
    15 апр 2006
    Сообщения:
    16.552
    Симпатии:
    7.905
    Адрес:
    1012 / 60158
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Martin Perry, 28 сен 2009
    #2
  3. Steve

    Steve Resident of Nat Pres Friend

    Дата регистрации:
    7 окт 2006
    Сообщения:
    12.822
    Симпатии:
    12.020
    Род занятий:
    Gentleman of leisure, nowadays
    Адрес:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    BR (Darlington) used to specify that the internal surfaces of Sentinel loco boilers were painted with Apexior. I've never heard or come across a similar BR requirement for conventional boilers, though.
     
    Steve, 3 окт 2009
    #3
  4. MacRat

    MacRat New Member

    Дата регистрации:
    26 мар 2006
    Сообщения:
    169
    Симпатии:
    0
    MacRat, 1 янв 2010
    #4
  5. Les_Tap

    Les_Tap New Member

    Дата регистрации:
    27 мар 2010
    Сообщения:
    5
    Симпатии:
    0
    Iam currently in work overhauling some paint plant flight bars that need repainting with a high temp paint as they travel through an oven thats about 450 c,I am using a silicon based aluminium paint as advised by the customer,the key to it "sticking" is a well prepped surface

    If you contact Dacrylate you need to speak to Rosie in sales,she is top dollar at what she does :clap2:
     
    Les_Tap, 29 мар 2010
    #5

Поделиться этой страницей