If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Tangmere

Тема в разделе 'Steam Traction', создана пользователем Live Steam, 4 сен 2011.

  1. buseng

    buseng Part of the furniture

    Дата регистрации:
    9 сен 2005
    Сообщения:
    4.801
    Симпатии:
    349
    Пол:
    Мужской
    Род занятий:
    Retired
    Адрес:
    Tilehurst, Reading, Berks.
    What we don't seem to know yet is exactly what has happened to 34067. There is a lot of talk about cylinder problems, even a hotbox was mentioned initially. Whatever it is, it seemed to get on to the WSR under its own power off the main line.
     
  2. 242A1

    242A1 Well-Known Member

    Дата регистрации:
    3 дек 2006
    Сообщения:
    1.561
    Симпатии:
    1.304
    Years ago I understand Shell changed the spec on Valvata and this caused the odd nasty surprise. If you read much about locomotive failures the use of incorrect specification lubricant - manufacturer's error or serious gaff on the part of railway staff - is a not insignificant cause. Mind you it doesn't help that locomotive lubrication systems are frequently inadequate. Hope the damage is not too drastic though
     
  3. DH34105

    DH34105 Member

    Дата регистрации:
    5 апр 2009
    Сообщения:
    454
    Симпатии:
    12
    Have seen reports elsewhere that Tangers was leaking steam profusely at Fairwater before limping onto WSR - she is now well on way back to Carnforth now behind 33207 - ta various!
     
  4. wcmlbls1846

    wcmlbls1846 Well-Known Member

    Дата регистрации:
    24 апр 2009
    Сообщения:
    1.034
    Симпатии:
    543
    Tangmere arr Carnforth midnight 8th behind 33207.

    Andrew N
     
  5. pnemickey

    pnemickey Member

    Дата регистрации:
    19 июл 2008
    Сообщения:
    275
    Симпатии:
    23
    Род занятий:
    Archaeologist
    Адрес:
    Penwortham
  6. KEYHAMTRAIN

    KEYHAMTRAIN Member

    Дата регистрации:
    6 окт 2005
    Сообщения:
    225
    Симпатии:
    2
  7. KentYeti

    KentYeti Guest

    The almost disasterous seizing up of part of the motion on German Pacific 012 100-4 a few years ago was eventually put down to a lubricant problem I was subsequntly told. "Modern" lubricant being used instead of one known to be suitable was what the other members of the Group that ran the loco told me. The loco was close to being derailed and part of the motion was so badly bent it had to be cut off before the loco could be moved from the main line it failed on.
     
  8. Sheff

    Sheff Resident of Nat Pres

    Дата регистрации:
    21 апр 2006
    Сообщения:
    8.057
    Симпатии:
    3.137
    Пол:
    Мужской
    Род занятий:
    Retired Engineer & Heritage Volunteer
    Адрес:
    N Warks
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    In steam with the outside rods on, so unless they've had the oil bath to bits and dropped the middle rod (which is highly unlikely and probably not practical - all sorts of balancing issues too I'd think) it shouldn't be too bad hopefully.
     
  9. Spamcan81

    Spamcan81 Nat Pres stalwart

    Дата регистрации:
    25 авг 2007
    Сообщения:
    35.831
    Симпатии:
    22.271
    Род занятий:
    Training moles
    Адрес:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    On a scale of very difficult to utterly fecking difficult, removing the centre rod without a pit is right off the scale so our engineers tell me. Moving slightly off topic, middle rod failures on a Spamcan on the road were unheard of - no doubt someone will now prove me wrong :)
     
  10. Sheff

    Sheff Resident of Nat Pres

    Дата регистрации:
    21 апр 2006
    Сообщения:
    8.057
    Симпатии:
    3.137
    Пол:
    Мужской
    Род занятий:
    Retired Engineer & Heritage Volunteer
    Адрес:
    N Warks
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I only mentioned the middle rod as there was reference somewhere to middle cylinder problems - not suggesting any problem with the rod itself (or big end) before the rumour mill goes into full forward gear! ;)
     
  11. shedbasher

    shedbasher Member

    Дата регистрации:
    3 авг 2010
    Сообщения:
    376
    Симпатии:
    3
    Род занятий:
    musician
    Адрес:
    bedford
    I hope its back for the Swanage trip I am booked on
     
  12. green five

    green five Resident of Nat Pres

    Дата регистрации:
    30 апр 2006
    Сообщения:
    6.780
    Симпатии:
    2.612
    Пол:
    Мужской
    Род занятий:
    Design Draughtsman
    Адрес:
    Hampshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
  13. daveannjon

    daveannjon Well-Known Member

    Дата регистрации:
    31 мар 2006
    Сообщения:
    1.114
    Симпатии:
    425
    Адрес:
    Waiting for the Right Away
    Tha cannot beat Uncle Tom Gradeley's Yorkshire Pudding Steam Oil :)

    Were 45231's problems caused by lubrication issues?

    Dave
     
  14. kieranhardy

    kieranhardy Well-Known Member

    Дата регистрации:
    8 июн 2006
    Сообщения:
    1.603
    Симпатии:
    870
    Пол:
    Мужской
    Адрес:
    Kidderminster
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I've seen many locomotives with their wheels looking just like that though.
     
  15. Spamcan81

    Spamcan81 Nat Pres stalwart

    Дата регистрации:
    25 авг 2007
    Сообщения:
    35.831
    Симпатии:
    22.271
    Род занятий:
    Training moles
    Адрес:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Agreed, nothing unusual. Often associated with a leaking piston rod gland.
     
  16. green five

    green five Resident of Nat Pres

    Дата регистрации:
    30 апр 2006
    Сообщения:
    6.780
    Симпатии:
    2.612
    Пол:
    Мужской
    Род занятий:
    Design Draughtsman
    Адрес:
    Hampshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Looking at my video of the ACE again it sounds like 34067 is making a strange squeaking noise as she passes:
    [video=youtube;hKpM01pvLTs]http://www.youtube.com/watch?v=hKpM01pvLTs[/video]

    An early sign of the problem perhaps............



    Edit: Seen a comment elsewhere that "34067 has a right-hand cylinder liner problem".
     
  17. SteamHawk216

    SteamHawk216 Member

    Дата регистрации:
    5 апр 2009
    Сообщения:
    372
    Симпатии:
    30
    Пол:
    Мужской
    Род занятий:
    Retired, my occupation for the rest of my life.
    Адрес:
    21C103
    Heritage Railway Volunteer:
    No I do not currently volunteer
  18. buseng

    buseng Part of the furniture

    Дата регистрации:
    9 сен 2005
    Сообщения:
    4.801
    Симпатии:
    349
    Пол:
    Мужской
    Род занятий:
    Retired
    Адрес:
    Tilehurst, Reading, Berks.
    Looks like Tangmere is penciled in for a LE move from Carnforth to Southall next Saturday (1st Oct). Presumably she is fit again.
    http://www.uksteam.info/tours/lem11.htm#twk

    H
    mmm? just looked again & see it's down for the Sussex Belle next Wednesday the 28th. Interesting to see what happens.
     
  19. gwr4090

    gwr4090 Part of the furniture

    Дата регистрации:
    8 авг 2005
    Сообщения:
    2.847
    Симпатии:
    222
    Пол:
    Мужской
    Род занятий:
    Scientist (Rtd)
    Адрес:
    Dorset
    Tangmere is moving today (Monday) not Saturday - now corrected at uksteam.info
     
  20. RalphW

    RalphW Nat Pres stalwart Staff Member Administrator Friend

    Дата регистрации:
    11 сен 2005
    Сообщения:
    36.443
    Симпатии:
    9.907
    Пол:
    Мужской
    Род занятий:
    Retired-ish, Part time rail tour steward.
    Адрес:
    Northwich
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Seen at Lancaster at 10.10 this morning.
     

Поделиться этой страницей