If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

The Tin Bath.

本贴由 neildimmer2014-01-12 发布. 版块名称: What's Going On

主题状态:
主题已关闭, 停止回复.
  1. GBoreham

    GBoreham Member

    注册日期:
    2014-03-15
    帖子:
    371
    支持:
    1,097
    性别:
    所在地:
    Burscough Bridge
    45305 has been undergoing repairs for several months now at Haworth so that still mustn't be complete. And yes it certainly will provide an unusual sight around the Pennines; Surprising really it isn't just 70013 on its own all the way round as with 61994 piloting it will be limited to 50mph.
     
  2. 26D_M

    26D_M Part of the furniture

    注册日期:
    2009-10-22
    帖子:
    4,416
    支持:
    1,681
    A commitment had probably already been made to 61994s owner when a 5 was being paired. It would be a bit tough to drop it because a 7 was made available. Likewise could see 44932 vice 45305 being an option but hlpg have offered a sub so are probably entitled to their gig.
    Not sure that the K4 is limited to 50mph anyhow. It's drivers are 2" into the 60mph band are they not?
     
  3. GBoreham

    GBoreham Member

    注册日期:
    2014-03-15
    帖子:
    371
    支持:
    1,097
    性别:
    所在地:
    Burscough Bridge
    The K4 has 5' 2" driving wheels like the K1 does and both are limited to 50mph. 60mph band is 5' 8" or higher.
     
  4. 2J66

    2J66 Well-Known Member

    注册日期:
    2011-03-05
    帖子:
    1,425
    支持:
    354
    性别:
    所在地:
    Argyll
    Just out of interest has 70013 turned a wheel on the main line this year & is it not still at Southall? Unless there is other pending work up north before its scheduled outing from Waterloo on 7th June it does seem a lot of positioning mileage for the one relatively short trip.
     
  5. neildimmer

    neildimmer Resident of Nat Pres

    注册日期:
    2008-06-06
    帖子:
    9,175
    支持:
    1,144
    Isn't it at the GCR? at the moment, sure I saw some pics of it recently
     
  6. 26D_M

    26D_M Part of the furniture

    注册日期:
    2009-10-22
    帖子:
    4,416
    支持:
    1,681
    Believe so, thus a road move will be needed to get it to a rail connected place. Presumably Carnforth?
     
  7. 26D_M

    26D_M Part of the furniture

    注册日期:
    2009-10-22
    帖子:
    4,416
    支持:
    1,681
    Stand corrected and 50 would therefore be the limit regardless of pairing. Where does the 75mph diameter band begin?
    Presumably timed accordingly anyway.
     
  8. GBoreham

    GBoreham Member

    注册日期:
    2014-03-15
    帖子:
    371
    支持:
    1,097
    性别:
    所在地:
    Burscough Bridge
    75mph locos have driving wheels of 6' 2" or greater.
     
  9. 242A1

    242A1 Well-Known Member

    注册日期:
    2006-12-03
    帖子:
    1,562
    支持:
    1,309
    Yes, both have 5' 2" driving wheels but a glance into the cab of 61994 will tell you all you need to know. Strange to say this subject has done the rounds before on this forum. The engine was re-rated some years ago to 60mph and so far as I am aware has not reverted to 50mph. On the revised route, if TGM turned up at Preston on the day, particularly with Sir Gordon as driver, then just look forward to a grand day out. The potential climb up Miles Platting would be worth buying a ticket for.
     
  10. ADB968008

    ADB968008 Guest

    Could be a formula for a winter CME in 2015, in absence of the S&C.
     
    已获得26D_M的支持.
  11. 26D_M

    26D_M Part of the furniture

    注册日期:
    2009-10-22
    帖子:
    4,416
    支持:
    1,681
    Thanks for the clarification and agree with your assessment of the potential.
     
  12. jonathonag

    jonathonag Well-Known Member

    注册日期:
    2006-05-11
    帖子:
    1,640
    支持:
    3,194
    职业:
    Railway Engineer
    所在地:
    Cowdenbeath
    Not the first time, the pair double headed over the Highland Mainline on the Great Britain III in 2010.
     
  13. Steamage

    Steamage Part of the furniture

    注册日期:
    2005-09-14
    帖子:
    4,752
    支持:
    1,129
    所在地:
    Oxford
  14. 26D_M

    26D_M Part of the furniture

    注册日期:
    2009-10-22
    帖子:
    4,416
    支持:
    1,681
    Didn't recollect that, thanks for the reminder.
     
  15. neildimmer

    neildimmer Resident of Nat Pres

    注册日期:
    2008-06-06
    帖子:
    9,175
    支持:
    1,144
    missing off RTC website now
     
  16. 5944

    5944 Resident of Nat Pres

    注册日期:
    2006-01-14
    帖子:
    8,992
    支持:
    9,520
    性别:
    职业:
    Train Maintainer for GTR at Hornsey
    所在地:
    Letchworth
    Heritage Railway Volunteer:
    No I do not currently volunteer
    5305 LA website saying 45305 is on the tour, double heading with 61994. Don't know if it's been on there a while, but they put a post on Twitter yesterday stating such. Bit odd if 70013 is being advertised.
     
  17. 30567

    30567 Resident of Nat Pres Friend

    注册日期:
    2012-08-07
    帖子:
    6,153
    支持:
    4,110
    RTC website thought it was May 11 and deleted. Wonders of modern technology.
     
  18. RalphW

    RalphW Nat Pres stalwart Staff Member Administrator Friend

    注册日期:
    2005-09-11
    帖子:
    36,569
    支持:
    9,984
    性别:
    职业:
    Retired-ish, Part time rail tour steward.
    所在地:
    Northwich
    Heritage Railway Volunteer:
    No I do not currently volunteer
  19. mike1522

    mike1522 Long Time Member Friend

    注册日期:
    2010-10-09
    帖子:
    2,002
    支持:
    237
    所在地:
    Fort Worth, Texas
    I thought the K4 did 60mph.
     
  20. 5944

    5944 Resident of Nat Pres

    注册日期:
    2006-01-14
    帖子:
    8,992
    支持:
    9,520
    性别:
    职业:
    Train Maintainer for GTR at Hornsey
    所在地:
    Letchworth
    Heritage Railway Volunteer:
    No I do not currently volunteer
    5305LA now saying tour postponed due to engineering work.
     
主题状态:
主题已关闭, 停止回复.

分享此页面