If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Aktueller Inhalt von chessie1

  1. chessie1
    Beitrag

    Mid Hants Railway Operational Matters

    I give up what would they think? Oh, you don’t know either do you?
    Beitrag von: chessie1, 6 Dezember 2020 im Forum: Heritage Railways & Centres in the UK
  2. chessie1
    Beitrag

    Bulleid Pacifics - Past or Present

    I remember from years ago when, as a volunteer on the MHR, we used to operate 34016 and then 73096 on the mainline. One of the grumbles used to be...
    Beitrag von: chessie1, 12 November 2020 im Forum: Steam Traction
  3. chessie1
    Beitrag

    Locomotive Services Limited Open Day

    They couldn't have done much work at Southall, only facility on the LSL side is a pit.
    Beitrag von: chessie1, 12 Juni 2019 im Forum: Steam Traction
  4. chessie1
    Beitrag

    Mid Hants volunteering.

    Seriously? Twenty five years ago....
    Beitrag von: chessie1, 22 November 2017 im Forum: Heritage Railways & Centres in the UK
  5. chessie1
    Beitrag

    73096

    Just had a good read through the latter stages of this thread...hilarious. I'd love to hear a few on here get started on Kennedy's assassination...
    Beitrag von: chessie1, 18 November 2017 im Forum: Steam Traction
  6. chessie1
    Beitrag

    Mid Hants Railway Operational Matters

    [ATTACH] Looking forward to getting my hands on it again!
    Beitrag von: chessie1, 9 November 2017 im Forum: Heritage Railways & Centres in the UK
  7. chessie1
    Beitrag

    Bulleid Pacific boiler pressure

    Netherwood must have wondered what was going on today with various people firing questions about 34016 at him (saw your post on facebook) . It...
    Beitrag von: chessie1, 25 Oktober 2017 im Forum: Steam Traction
  8. chessie1
    Beitrag

    Bulleid Pacific boiler pressure

    I'm sorry to disagree but Bodmin was 250psi. The St5 was 225psi but as I say the Bulleids, 07, 16 and 105 were 250psi. I'll leave it there now.
    Beitrag von: chessie1, 24 Oktober 2017 im Forum: Steam Traction
  9. chessie1
    Beitrag

    Bulleid Pacific boiler pressure

    The Bulleids that have been on the MHR over the years, and indeed those visiting examples that I've driven have all been rated at 250psi.
    Beitrag von: chessie1, 24 Oktober 2017 im Forum: Steam Traction
  10. chessie1
    Beitrag

    Flying Scotsman

    So why do it?
    Beitrag von: chessie1, 23 Oktober 2017 im Forum: Steam Traction
  11. chessie1
    Beitrag

    Mid Hants Railway Operational Matters

    Really like the one of the 9f with the cocks open....a bit different.
    Beitrag von: chessie1, 25 Juni 2017 im Forum: Heritage Railways & Centres in the UK
  12. chessie1
    Beitrag

    Mid Hants Railway Operational Matters

    Yep..sure.
    Beitrag von: chessie1, 29 April 2017 im Forum: Heritage Railways & Centres in the UK
  13. chessie1
    Beitrag

    Mid Hants Railway Operational Matters

    There are a few still left. Sounds like you've got another axe to grind Chris.
    Beitrag von: chessie1, 28 April 2017 im Forum: Heritage Railways & Centres in the UK
  14. chessie1
    Beitrag

    46233 to York: 10/12/16

    Given the type of customer that at least one of the new tocs hoping to operate with steam will be going for the most change needed will be to the...
    Beitrag von: chessie1, 12 Dezember 2016 im Forum: What's Going On
  15. chessie1
    Beitrag

    46233 to York: 10/12/16

    I think you are looking at this from a glass half empty perspective...when an excursion utilising steam traction goes wrong it generates huge...
    Beitrag von: chessie1, 11 Dezember 2016 im Forum: What's Going On