If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Slacking Dimensions?

Dieses Thema im Forum 'Locomotive Engineering M.I.C' wurde von jonathonag gestartet, 3 Februar 2008.

Seite 3 von 3
  1. olly5764

    olly5764 Well-Known Member

    Registriert seit:
    29 Dezember 2006
    Beiträge:
    1.887
    Zustimmungen:
    1.017
    Geschlecht:
    männlich
    Beruf:
    Engineer
    Ort:
    Normally in a brake van somewhere
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    yup, and I have had drawings at work from a company in france supplying to the States, calling for a bolt with a 25.4 x 3.175 pitch x 60 degree thread, or as engineers would know it, 1" 8un
     
    olly5764, 6 April 2008
    #41
  2. Kerosene Castle

    Kerosene Castle Well-Known Member

    Registriert seit:
    2 April 2006
    Beiträge:
    1.345
    Zustimmungen:
    0
    Ort:
    Hell, aka Hull
    If you're going to mix the two up, you really should do it properly; ie '7 foot 6 mil'.

    Who says metric and imperial can't work together?
     
    Kerosene Castle, 6 April 2008
    #42
  3. boldford

    boldford Member

    Registriert seit:
    22 August 2005
    Beiträge:
    435
    Zustimmungen:
    2
    Failing miserably to resist the temptation to enter pedant mode.

    You mean 6.35mm, don't you?
     
    boldford, 6 April 2008
    #43
  4. olly5764

    olly5764 Well-Known Member

    Registriert seit:
    29 Dezember 2006
    Beiträge:
    1.887
    Zustimmungen:
    1.017
    Geschlecht:
    männlich
    Beruf:
    Engineer
    Ort:
    Normally in a brake van somewhere
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I don't know Brian, give you 25.4 mm, you take .914 meters!
     
    olly5764, 16 April 2008
    #44
Seite 3 von 3

Die Seite empfehlen