If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Taw Valley

Dieses Thema im Forum 'Steam Traction' wurde von 34014 gestartet, 5 Juli 2009.

  1. 34014

    34014 Member

    Registriert seit:
    14 März 2006
    Beiträge:
    430
    Zustimmungen:
    30
    Geschlecht:
    männlich
    Beruf:
    Retired
    Ort:
    Thailand, The Land Of Smiles.
    Hi All

    Anyone out there who can advise progress on the long overhaul of Taw Valley? Seems like a long time since she was mentioned.
     
    34014, 5 Juli 2009
    #1
  2. kieranhardy

    kieranhardy Well-Known Member

    Registriert seit:
    8 Juni 2006
    Beiträge:
    1.603
    Zustimmungen:
    870
    Geschlecht:
    männlich
    Ort:
    Kidderminster
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The most recent news i can find of her on here is in this thread:

    viewtopic.php?f=28&t=14627&p=282077&hilit=34027#p282077

    But that was back in March. On the SVR forum the latest news which was in May was that the bogie and pony truck were almost completely assembled.

    When i visited last week she didn't seem to resemble anything close to a complete loco so i would have thought she is at least 1-2 years away from steaming again.
     
    kieranhardy, 5 Juli 2009
    #2
  3. pseudonym

    pseudonym New Member

    Registriert seit:
    22 Oktober 2007
    Beiträge:
    31
    Zustimmungen:
    0
    The boiler is still away at Roger Pridham's. I'm informed a few problems at a number of levels to this contract job have caused progress on the main chassis to slow. SVR permanent staff are focused on the main running fleet.
     
    pseudonym, 6 Juli 2009
    #3
  4. 46118

    46118 Part of the furniture

    Registriert seit:
    16 September 2005
    Beiträge:
    4.043
    Zustimmungen:
    212
    Latest SVR News says that the leading and trailing trucks* are now fully assembled and waiting to be installed under the frames. Driving wheels scraped, rubbed down and painted. Axlebox horn plates removed and refurbished,and securing fitted bolts and nuts replaced as necessary. Attention now turning to rebuilding the cab. I recall that the frames required much work in terms of loose/worn bolts/rivets. A new outside cylinder was cast some time ago.

    Last time the owner reported about the boiler/firebox repair, being undertaken away from the SVR, was that it was turning out to be very expensive.

    *Thats what the magazine says. For "leading truck" read "front bogie". Dont want some wit asking if it is a 2-6-2 !!

    46118
     
    46118, 6 Juli 2009
    #4

Die Seite empfehlen