If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Tender Tanks

Dieses Thema im Forum 'Steam Traction' wurde von daveannjon gestartet, 16 September 2018.

  1. daveannjon

    daveannjon Well-Known Member

    Registriert seit:
    31 März 2006
    Beiträge:
    1.114
    Zustimmungen:
    425
    Ort:
    Waiting for the Right Away
    Can anyone give me a ball park figure for the weight of a tender tank i.e. empty and without chassis?
    I appreciate there will be differences but say for something like a Stanier or Collett tender.

    Many thanks
    Dave
     
    daveannjon, 16 September 2018
    #1
  2. Roosterrory

    Roosterrory Member

    Registriert seit:
    26 April 2006
    Beiträge:
    455
    Zustimmungen:
    85
    Beruf:
    Fireman/Fitter at PDSR
    Ort:
    Churston or Cranmore
    An all welded 4000 gal hawksworth Is about 6.5t. Would imagine the same sized collet to be roughly the same If not a little more.
     
    Roosterrory, 16 September 2018
    #2
  3. daveannjon

    daveannjon Well-Known Member

    Registriert seit:
    31 März 2006
    Beiträge:
    1.114
    Zustimmungen:
    425
    Ort:
    Waiting for the Right Away
    Thanks that's a good guide.
    Dave
     
    daveannjon, 16 September 2018
    #3
  4. Steve

    Steve Resident of Nat Pres Friend

    Registriert seit:
    7 Oktober 2006
    Beiträge:
    12.732
    Zustimmungen:
    11.848
    Beruf:
    Gentleman of leisure, nowadays
    Ort:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    You can work it out for yourself if you have a drawing. A 1/4" thick steel plate weighs as near as makes no difference 10 lb/sq ft. ( Thus, if it's 3/8" thick it would weight 15 lb/sq ft.) You don't have to be too accurate in your dimensions to get a ball park figure.
     
    Steve, 16 September 2018
    #4

Die Seite empfehlen