If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

3d printers

Rasprava u 'Model Railways' pokrenuta od martin1656, 2. Srpanj 2021..

  1. martin1656

    martin1656 Nat Pres stalwart Friend

    Pridružen(a):
    8. Prosinac 2014.
    Poruka:
    19,263
    Lajkova:
    12,515
    Spol:
    Muškarac
    Grad:
    St Leonards
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Now that these are getting more affordable, and cad programs are allowing far more detail to be added, has anyone gone down the print your own trucks, buildings etc route for model railway layouts
    I'm certainly becoming more interested in buying a printer, mostly because i bought some 3d printed L&B coaches and i think they are actually undersized , either that of the 4 wheelers i got, are over sized, and i would like to have a stab at printing some 4w coach body's myself because the genetic ones i have just are very plain and i saw a video of one someone had planned, printed, and it had far more detailing,
     
    martin1656, 2. Srpanj 2021.
    #1
  2. MG 7305

    MG 7305 New Member

    Pridružen(a):
    30. Ožujak 2009.
    Poruka:
    125
    Lajkova:
    159
    Try here for a starter's viewpoint.
     
    MG 7305, 2. Srpanj 2021.
    #2
  3. martin1656

    martin1656 Nat Pres stalwart Friend

    Pridružen(a):
    8. Prosinac 2014.
    Poruka:
    19,263
    Lajkova:
    12,515
    Spol:
    Muškarac
    Grad:
    St Leonards
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Well i took the plunge and ordered an printer, now i have to refresh my Drawing skills, I did TD at school, but that was in the days when CAD was just a dream, in some programmes mind, more like drafting, than using a mouse,
    I have been told that Sketch up for web is a good basic cad program and its free, for the basic version, so I've down loaded it, and now the fun begins, learning basic cad drawing, before i start to actually print anything, can anyone offer any advise in using these programs, for instance, scale sizing etc, I'm going to start simple, maybe a small building like a wayside shelter and booking office, and go on to designing as chassis for some coaches, then some bodies for my narrow gauge lay out.
     
    martin1656, 4. Srpanj 2021.
    #3
  4. staffordian

    staffordian Well-Known Member

    Pridružen(a):
    27. Ožujak 2012.
    Poruka:
    1,524
    Lajkova:
    2,172
    Spol:
    Muškarac
    Interesi:
    Retired
    Grad:
    The Potteries
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I've yet to find a topic which isn't covered by a selection of YouTube tutorial videos, ranging from cr@p to very good.
     
    staffordian, 4. Srpanj 2021.
    #4
  5. Pete Thornhill

    Pete Thornhill Resident of Nat Pres Staff Member Administrator Moderator Friend

    Pridružen(a):
    24. Srpanj 2008.
    Poruka:
    7,762
    Lajkova:
    5,890
    You tube - the unofficial manual to life :D

    There’s quite a lot on 3D printing on there to be fair. https://www.facebook.com/groups/3DModelTrains/?ref=share
    I    f you use Facebook, the above group is dedicated to the subject.
     
    Pete Thornhill, 4. Srpanj 2021.
    #5

Podijelite ovu stranicu