If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Crossing Lamps?

Rasprava u 'Railwayana' pokrenuta od Chris86, 22. Ožujak 2020..

  1. Chris86

    Chris86 Well-Known Member

    Pridružen(a):
    31. Listopad 2011.
    Poruka:
    1,613
    Lajkova:
    1,847
    Interesi:
    Safety, technical and vehicle trainer
    Grad:
    South Yorkshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Hello,

    I have rescued a couple of what I believe are BR (E) crossing lamps from certain oblivion in a skip!

    They don't have any of the innards (no burner etc) so my intention is to cosmetically restore and make a removable LED unit to go in for display.

    Luckily- there is a spare bullseye lens in the one that is damaged!

    Can anyone tell me how these lenses are fitted- or give me any pointers on restoration?

    My plan is to use wire wheels on a drill or grinder- rust converter- primer then paint- they appear to have been black from the traces of remaining paint on them?

    Best Regards

    Chris
     

    Privici:

    Chris86, 22. Ožujak 2020.
    #1
  2. Martin Adalar

    Martin Adalar New Member

    Pridružen(a):
    2. Svibanj 2018.
    Poruka:
    193
    Lajkova:
    69
    Spol:
    Muškarac
    Grad:
    5D
    Heritage Railway Volunteer:
    No I do not currently volunteer
    It is a good many years since I had to place a lamp in one of these but I think the bullseyes and lenses were secured with putty or some similar compound.
     
    Martin Adalar, 25. Ožujak 2020.
    #2
  3. Paper-pusher

    Paper-pusher New Member

    Pridružen(a):
    14. Listopad 2018.
    Poruka:
    6
    Lajkova:
    0
    Spol:
    Muškarac
    Grad:
    Leinster
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    You can occasionally find the oil burners on eBay but they are scarce.

    Putty is used on the ones I have seen.
     
    Paper-pusher, 24. Lipanj 2020.
    #3
  4. TseTT

    TseTT New Member

    Pridružen(a):
    21. Lipanj 2011.
    Poruka:
    77
    Lajkova:
    55
    For info. I think you may have signal lamps, especially as one of them appears to have a sunshade. A crossing lamp usually has a red bullseye (or Fresnel) lens on both sides. . The attached photo from the Lamp Manufacturing and Railway Supplies shows in the right hand what type of interior is required for both. There should also be a tin, removable anti draught base inside it too, but often lost.
     

    Privici:

    TseTT, 23. Srpanj 2020.
    #4
  5. Martin Adalar

    Martin Adalar New Member

    Pridružen(a):
    2. Svibanj 2018.
    Poruka:
    193
    Lajkova:
    69
    Spol:
    Muškarac
    Grad:
    5D
    Heritage Railway Volunteer:
    No I do not currently volunteer
    One corner of the inner lamp was rounded so that when you placed it in the outer case it was always correctly orientated.
     
    Martin Adalar, 15. Kolovoz 2020.
    #5

Podijelite ovu stranicu