If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Disability access

Rasprava u 'Heritage Rolling Stock' pokrenuta od Robkitchuk, 29. Siječanj 2021..

  1. Robkitchuk

    Robkitchuk Member

    Pridružen(a):
    7. Lipanj 2013.
    Poruka:
    324
    Lajkova:
    358
    Spol:
    Muškarac
    Grad:
    Durham
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Hello all,
    Been asked to look into converting a guards van (LMS) into an accessible vehicle. Whilst I can find basic specifications, these don't apply to historic rail vehicles specifically.

    Does anyone have experiences or specifications from their own projects?

    Thank you in advance!
     
    Robkitchuk, 29. Siječanj 2021.
    #1
  2. Steve

    Steve Resident of Nat Pres Friend

    Pridružen(a):
    7. Listopad 2006.
    Poruka:
    12,729
    Lajkova:
    11,847
    Interesi:
    Gentleman of leisure, nowadays
    Grad:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Have you had a look at The Rail Vehicle Accessibility (Non-Interoperable Rail System) Regulations 2010? That will give you some guidance on what is required. If you are modifying a vehicle to be accessible you really should be looking at complying with this as much as you reasonably can. In your case it is largely going to be to provide a wheelchair accessible doorway. If it is your LMS Dia D1659 van, I think that has structural cross bracing that will get in the way and an inconvenient brake column in the middle. Not the easiest one to deal with but not impossible.
     
    Steve, 29. Siječanj 2021.
    #2

Podijelite ovu stranicu