If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Slacking Dimensions?

Rasprava u 'Locomotive Engineering M.I.C' pokrenuta od jonathonag, 3. Veljača 2008..

Stranica 3 od 3
  1. olly5764

    olly5764 Well-Known Member

    Pridružen(a):
    29. Prosinac 2006.
    Poruka:
    1,887
    Lajkova:
    1,017
    Spol:
    Muškarac
    Interesi:
    Engineer
    Grad:
    Normally in a brake van somewhere
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    yup, and I have had drawings at work from a company in france supplying to the States, calling for a bolt with a 25.4 x 3.175 pitch x 60 degree thread, or as engineers would know it, 1" 8un
     
    olly5764, 6. Travanj 2008.
    #41
  2. Kerosene Castle

    Kerosene Castle Well-Known Member

    Pridružen(a):
    2. Travanj 2006.
    Poruka:
    1,345
    Lajkova:
    0
    Grad:
    Hell, aka Hull
    If you're going to mix the two up, you really should do it properly; ie '7 foot 6 mil'.

    Who says metric and imperial can't work together?
     
    Kerosene Castle, 6. Travanj 2008.
    #42
  3. boldford

    boldford Member

    Pridružen(a):
    22. Kolovoz 2005.
    Poruka:
    435
    Lajkova:
    2
    Failing miserably to resist the temptation to enter pedant mode.

    You mean 6.35mm, don't you?
     
    boldford, 6. Travanj 2008.
    #43
  4. olly5764

    olly5764 Well-Known Member

    Pridružen(a):
    29. Prosinac 2006.
    Poruka:
    1,887
    Lajkova:
    1,017
    Spol:
    Muškarac
    Interesi:
    Engineer
    Grad:
    Normally in a brake van somewhere
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I don't know Brian, give you 25.4 mm, you take .914 meters!
     
    olly5764, 16. Travanj 2008.
    #44
Stranica 3 od 3

Podijelite ovu stranicu