If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Tangmere

Rasprava u 'Steam Traction' pokrenuta od Live Steam, 4. Rujan 2011..

  1. buseng

    buseng Part of the furniture

    Pridružen(a):
    9. Rujan 2005.
    Poruka:
    4,801
    Lajkova:
    349
    Spol:
    Muškarac
    Interesi:
    Retired
    Grad:
    Tilehurst, Reading, Berks.
    What we don't seem to know yet is exactly what has happened to 34067. There is a lot of talk about cylinder problems, even a hotbox was mentioned initially. Whatever it is, it seemed to get on to the WSR under its own power off the main line.
     
  2. 242A1

    242A1 Well-Known Member

    Pridružen(a):
    3. Prosinac 2006.
    Poruka:
    1,561
    Lajkova:
    1,304
    Years ago I understand Shell changed the spec on Valvata and this caused the odd nasty surprise. If you read much about locomotive failures the use of incorrect specification lubricant - manufacturer's error or serious gaff on the part of railway staff - is a not insignificant cause. Mind you it doesn't help that locomotive lubrication systems are frequently inadequate. Hope the damage is not too drastic though
     
  3. DH34105

    DH34105 Member

    Pridružen(a):
    5. Travanj 2009.
    Poruka:
    454
    Lajkova:
    12
    Have seen reports elsewhere that Tangers was leaking steam profusely at Fairwater before limping onto WSR - she is now well on way back to Carnforth now behind 33207 - ta various!
     
  4. wcmlbls1846

    wcmlbls1846 Well-Known Member

    Pridružen(a):
    24. Travanj 2009.
    Poruka:
    1,034
    Lajkova:
    544
    Tangmere arr Carnforth midnight 8th behind 33207.

    Andrew N
     
  5. pnemickey

    pnemickey Member

    Pridružen(a):
    19. Srpanj 2008.
    Poruka:
    275
    Lajkova:
    23
    Interesi:
    Archaeologist
    Grad:
    Penwortham
  6. KEYHAMTRAIN

    KEYHAMTRAIN Member

    Pridružen(a):
    6. Listopad 2005.
    Poruka:
    225
    Lajkova:
    2
  7. KentYeti

    KentYeti Guest

    The almost disasterous seizing up of part of the motion on German Pacific 012 100-4 a few years ago was eventually put down to a lubricant problem I was subsequntly told. "Modern" lubricant being used instead of one known to be suitable was what the other members of the Group that ran the loco told me. The loco was close to being derailed and part of the motion was so badly bent it had to be cut off before the loco could be moved from the main line it failed on.
     
  8. Sheff

    Sheff Resident of Nat Pres

    Pridružen(a):
    21. Travanj 2006.
    Poruka:
    8,058
    Lajkova:
    3,137
    Spol:
    Muškarac
    Interesi:
    Retired Engineer & Heritage Volunteer
    Grad:
    N Warks
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    In steam with the outside rods on, so unless they've had the oil bath to bits and dropped the middle rod (which is highly unlikely and probably not practical - all sorts of balancing issues too I'd think) it shouldn't be too bad hopefully.
     
  9. Spamcan81

    Spamcan81 Nat Pres stalwart

    Pridružen(a):
    25. Kolovoz 2007.
    Poruka:
    35,831
    Lajkova:
    22,271
    Interesi:
    Training moles
    Grad:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    On a scale of very difficult to utterly fecking difficult, removing the centre rod without a pit is right off the scale so our engineers tell me. Moving slightly off topic, middle rod failures on a Spamcan on the road were unheard of - no doubt someone will now prove me wrong :)
     
  10. Sheff

    Sheff Resident of Nat Pres

    Pridružen(a):
    21. Travanj 2006.
    Poruka:
    8,058
    Lajkova:
    3,137
    Spol:
    Muškarac
    Interesi:
    Retired Engineer & Heritage Volunteer
    Grad:
    N Warks
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I only mentioned the middle rod as there was reference somewhere to middle cylinder problems - not suggesting any problem with the rod itself (or big end) before the rumour mill goes into full forward gear! ;)
     
  11. shedbasher

    shedbasher Member

    Pridružen(a):
    3. Kolovoz 2010.
    Poruka:
    376
    Lajkova:
    3
    Interesi:
    musician
    Grad:
    bedford
    I hope its back for the Swanage trip I am booked on
     
  12. green five

    green five Resident of Nat Pres

    Pridružen(a):
    30. Travanj 2006.
    Poruka:
    6,781
    Lajkova:
    2,614
    Spol:
    Muškarac
    Interesi:
    Design Draughtsman
    Grad:
    Hampshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
  13. daveannjon

    daveannjon Well-Known Member

    Pridružen(a):
    31. Ožujak 2006.
    Poruka:
    1,114
    Lajkova:
    425
    Grad:
    Waiting for the Right Away
    Tha cannot beat Uncle Tom Gradeley's Yorkshire Pudding Steam Oil :)

    Were 45231's problems caused by lubrication issues?

    Dave
     
  14. kieranhardy

    kieranhardy Well-Known Member

    Pridružen(a):
    8. Lipanj 2006.
    Poruka:
    1,603
    Lajkova:
    870
    Spol:
    Muškarac
    Grad:
    Kidderminster
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I've seen many locomotives with their wheels looking just like that though.
     
  15. Spamcan81

    Spamcan81 Nat Pres stalwart

    Pridružen(a):
    25. Kolovoz 2007.
    Poruka:
    35,831
    Lajkova:
    22,271
    Interesi:
    Training moles
    Grad:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Agreed, nothing unusual. Often associated with a leaking piston rod gland.
     
  16. green five

    green five Resident of Nat Pres

    Pridružen(a):
    30. Travanj 2006.
    Poruka:
    6,781
    Lajkova:
    2,614
    Spol:
    Muškarac
    Interesi:
    Design Draughtsman
    Grad:
    Hampshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Looking at my video of the ACE again it sounds like 34067 is making a strange squeaking noise as she passes:
    [video=youtube;hKpM01pvLTs]http://www.youtube.com/watch?v=hKpM01pvLTs[/video]

    An early sign of the problem perhaps............



    Edit: Seen a comment elsewhere that "34067 has a right-hand cylinder liner problem".
     
  17. SteamHawk216

    SteamHawk216 Member

    Pridružen(a):
    5. Travanj 2009.
    Poruka:
    372
    Lajkova:
    30
    Spol:
    Muškarac
    Interesi:
    Retired, my occupation for the rest of my life.
    Grad:
    21C103
    Heritage Railway Volunteer:
    No I do not currently volunteer
  18. buseng

    buseng Part of the furniture

    Pridružen(a):
    9. Rujan 2005.
    Poruka:
    4,801
    Lajkova:
    349
    Spol:
    Muškarac
    Interesi:
    Retired
    Grad:
    Tilehurst, Reading, Berks.
    Looks like Tangmere is penciled in for a LE move from Carnforth to Southall next Saturday (1st Oct). Presumably she is fit again.
    http://www.uksteam.info/tours/lem11.htm#twk

    H
    mmm? just looked again & see it's down for the Sussex Belle next Wednesday the 28th. Interesting to see what happens.
     
  19. gwr4090

    gwr4090 Part of the furniture

    Pridružen(a):
    8. Kolovoz 2005.
    Poruka:
    2,847
    Lajkova:
    222
    Spol:
    Muškarac
    Interesi:
    Scientist (Rtd)
    Grad:
    Dorset
    Tangmere is moving today (Monday) not Saturday - now corrected at uksteam.info
     
  20. RalphW

    RalphW Nat Pres stalwart Staff Member Administrator Friend

    Pridružen(a):
    11. Rujan 2005.
    Poruka:
    36,443
    Lajkova:
    9,907
    Spol:
    Muškarac
    Interesi:
    Retired-ish, Part time rail tour steward.
    Grad:
    Northwich
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Seen at Lancaster at 10.10 this morning.
     

Podijelite ovu stranicu