If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Tender Tanks

Rasprava u 'Steam Traction' pokrenuta od daveannjon, 16. Rujan 2018..

  1. daveannjon

    daveannjon Well-Known Member

    Pridružen(a):
    31. Ožujak 2006.
    Poruka:
    1,114
    Lajkova:
    425
    Grad:
    Waiting for the Right Away
    Can anyone give me a ball park figure for the weight of a tender tank i.e. empty and without chassis?
    I appreciate there will be differences but say for something like a Stanier or Collett tender.

    Many thanks
    Dave
     
    daveannjon, 16. Rujan 2018.
    #1
  2. Roosterrory

    Roosterrory Member

    Pridružen(a):
    26. Travanj 2006.
    Poruka:
    455
    Lajkova:
    85
    Interesi:
    Fireman/Fitter at PDSR
    Grad:
    Churston or Cranmore
    An all welded 4000 gal hawksworth Is about 6.5t. Would imagine the same sized collet to be roughly the same If not a little more.
     
    Roosterrory, 16. Rujan 2018.
    #2
  3. daveannjon

    daveannjon Well-Known Member

    Pridružen(a):
    31. Ožujak 2006.
    Poruka:
    1,114
    Lajkova:
    425
    Grad:
    Waiting for the Right Away
    Thanks that's a good guide.
    Dave
     
    daveannjon, 16. Rujan 2018.
    #3
  4. Steve

    Steve Resident of Nat Pres Friend

    Pridružen(a):
    7. Listopad 2006.
    Poruka:
    12,732
    Lajkova:
    11,848
    Interesi:
    Gentleman of leisure, nowadays
    Grad:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    You can work it out for yourself if you have a drawing. A 1/4" thick steel plate weighs as near as makes no difference 10 lb/sq ft. ( Thus, if it's 3/8" thick it would weight 15 lb/sq ft.) You don't have to be too accurate in your dimensions to get a ball park figure.
     
    Steve, 16. Rujan 2018.
    #4

Podijelite ovu stranicu