If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Tender Tyre profiles

Rasprava u 'Locomotive Engineering M.I.C' pokrenuta od mcjlf1, 2. Rujan 2008..

  1. mcjlf1

    mcjlf1 New Member

    Pridružen(a):
    20. Listopad 2006.
    Poruka:
    107
    Lajkova:
    21
    Spol:
    Muškarac
    Interesi:
    Engineering Manager
    Grad:
    London
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Folks,

    I am seeking peoples' advice/experience regarding tender wheel profiles for three axle tenders.

    Is it customary to use a different profile for the middle wheelset , e.g. P9, with P1 on the Leading and Trailing wheels?

    Any words of wisdom greatfully received.


    Thanks
    James
     
    mcjlf1, 2. Rujan 2008.
    #1
  2. Crewe Hall

    Crewe Hall New Member

    Pridružen(a):
    1. Veljača 2008.
    Poruka:
    124
    Lajkova:
    0
    P1 on all sets. The intermediate (middle) axles on most tenders have increased provision for side play so there should be no need to reduce the flange to P9 on that wheelset.
     
    Crewe Hall, 16. Rujan 2008.
    #2

Podijelite ovu stranicu