If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

نتائج البحث

إعادة البحث
الصفحة 1 من 3
  1. martin1656
    مشاركة

    Mid Hants Railway Operational Matters

    I must admit, i found the std 5 an easier engine the cab layout was better, the std 4 tanks are probally the most suitable engines for...
    المشاركة بواسطة: martin1656, ‏26 فبراير 2025 في منتدى: Heritage Railways & Centres in the UK
  3. martin1656
    مشاركة

    Mid Hants Railway Operational Matters

    possibly 53808, assuming the money keeps up with the work flow, but I would think the easiest one to do next will be the Standard 5, depending...
    المشاركة بواسطة: martin1656, ‏25 فبراير 2025 في منتدى: Heritage Railways & Centres in the UK
  4. martin1656
    مشاركة

    Mid Hants Railway Operational Matters

    I think the railway should hold fire on restoring 850, for now, and concentrate on getting 75079 finished, then possibly 73096, before anything...
    المشاركة بواسطة: martin1656, ‏25 فبراير 2025 في منتدى: Heritage Railways & Centres in the UK
  5. martin1656
    مشاركة

    Tornado

    Are the NVR going to take advantage of having the A1, and A3 both on the railway at the same time ?
    المشاركة بواسطة: martin1656, ‏21 فبراير 2025 في منتدى: Steam Traction
  6. martin1656
    مشاركة

    Rother Valley Railway

    Theres a lot of bridges on that bit of route, I didn't, realise that many, has the surveys so far established the state the supporting structures...
    المشاركة بواسطة: martin1656, ‏21 فبراير 2025 في منتدى: Heritage Railways & Centres in the UK
  7. martin1656
    مشاركة

    National Railway Museum

    I have always thought that the NRM, has lost its way, and should always have been a stand-alone operation, and kept as such, the workshop...
    المشاركة بواسطة: martin1656, ‏18 فبراير 2025 في منتدى: National Railway Museum
  8. martin1656
    مشاركة

    Flying Scotsman

    If the only mainline requirement is going to be in steam transit from NRM location, to mainline connected heritage railway then I guess that DB...
    المشاركة بواسطة: martin1656, ‏11 فبراير 2025 في منتدى: Steam Traction
  9. martin1656
    مشاركة

    Tornado

    Can I make it clear, I'm hoping that those making decisions at Darlington do decide that the risk is too great, and any thought of 60163...
    المشاركة بواسطة: martin1656, ‏7 فبراير 2025 في منتدى: Steam Traction
  10. martin1656
    مشاركة

    Flying Scotsman

    The lead loco still has to be able to control the brake so at the very least, it would have to be through piped with a brake handle. and gauge
    المشاركة بواسطة: martin1656, ‏7 فبراير 2025 في منتدى: Steam Traction
  11. martin1656
    مشاركة

    Tornado

    OMHO, the decision to build the boiler with welded stays and not to increase the water jacket, was a mistake, threaded stays work just fine...
    المشاركة بواسطة: martin1656, ‏7 فبراير 2025 في منتدى: Steam Traction
  12. martin1656
    مشاركة

    Kent & East Sussex Railway

    Are you building a leader, so that when alien enthusiasts land in the car park, and say, take me to your leader, you can say, yes, its here in the...
    المشاركة بواسطة: martin1656, ‏6 فبراير 2025 في منتدى: Heritage Railways & Centres in the UK
  13. martin1656
    مشاركة

    Flying Scotsman

    If It does, I will be very surprised unless Ian Rileys 5's are sidelined for major overhauls, I don't think Carnforth plans to air brake any of...
    المشاركة بواسطة: martin1656, ‏6 فبراير 2025 في منتدى: Steam Traction
  14. martin1656
    مشاركة

    Flying Scotsman

    Other than the British Pulman, what other steam workings does DB now operate? and much of the British Pulman work goes to Clan line which has a...
    المشاركة بواسطة: martin1656, ‏6 فبراير 2025 في منتدى: Steam Traction
  15. martin1656
    مشاركة

    Current and Proposed New-Builds

    The two new builds that seem to have issues, do have one thing in common, and its nothing to do with them being new builds, Patriot, and the A1/...
    المشاركة بواسطة: martin1656, ‏5 فبراير 2025 في منتدى: Steam Traction
  16. martin1656
    مشاركة

    Tornado

    Thank you Sheff for breaking cover on this, So, its not a good look is it, boiler one expected to only last about 18 months, the best option...
    المشاركة بواسطة: martin1656, ‏5 فبراير 2025 في منتدى: Steam Traction
  17. martin1656
    مشاركة

    Tornado

    As to why, I think you have to hold those at the top responsible, they were saying it would be a 6 month overhaul, and they were already...
    المشاركة بواسطة: martin1656, ‏4 فبراير 2025 في منتدى: Steam Traction
  18. martin1656
    مشاركة

    Tornado

    When the decision was made to overhaul the current boiler, were the likes of Leaky finders not considered, after all they had done firebox work on...
    المشاركة بواسطة: martin1656, ‏4 فبراير 2025 في منتدى: Steam Traction
  19. martin1656
    مشاركة

    Bulleid Pacifics - Past or Present

    The biggest job so far is I would say the complete new inner firebox on 35005 Im not sure if the fireboxes are fully welded, but i do know the...
    المشاركة بواسطة: martin1656, ‏3 فبراير 2025 في منتدى: Steam Traction
  20. martin1656
    مشاركة

    P2 Locomotive Company and related matters

    If my memory serves me right, when the boiler design was handed to the German manufacturer, sorry can't remember the name, they were not happy...
    المشاركة بواسطة: martin1656, ‏3 فبراير 2025 في منتدى: Steam Traction
  21. martin1656
    مشاركة

    Tornado

    i have already expained once again, you seem to not understand, Im not going to waste my band space anymore, its a futile waste of my time.
    المشاركة بواسطة: martin1656, ‏3 فبراير 2025 في منتدى: Steam Traction
مشاهدة النتائج 1 إلى 20 من 45 التالي >
إعادة البحث
الصفحة 1 من 3