If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Regauging loco

الموضوع في 'Miniature Railways' بواسطة 73129, بتاريخ ‏28 ديسمبر 2008.

  1. 73129

    73129 Part of the furniture

    إنضم إلينا في:
    ‏24 سبتمبر 2007
    المشاركات:
    4,548
    عدد المعجبين:
    1,186
    مكان الإقامة:
    Winchester
    Hi all please can someone answer a question for me. I’ve been reading Railway magazine and someone from the MHR has purchased a 12 1/4in gauge loco from Fairbourne Railway (T.J. Thurston 4-6-2 built in 1948) but this loco will need to be regauged to 10 1/4in. How easy is it to regauge a loco and what would you need to do to it?


    Thanks
     
    73129, ‏28 ديسمبر 2008
    #1
  2. rough-shunter

    rough-shunter Guest

    new axels and possibly moving the frames inwards slightly
     
    rough-shunter, ‏29 ديسمبر 2008
    #2
  3. ilvaporista

    ilvaporista Part of the furniture

    إنضم إلينا في:
    ‏16 يناير 2006
    المشاركات:
    4,356
    عدد المعجبين:
    5,455
    الجنس:
    ذكر
    الوظيفة:
    C.Eng
    مكان الإقامة:
    On the 45th!
    To regauge a loco can be a pretty involved task. A lot depands on the type and construction of the loco. If you move the frames in and the firebox just fits between the frames then the boiler will need re-working /replacing. There is no standard list of what work neds doing, every case needs a careful study before starting.
     
    ilvaporista, ‏7 يناير 2009
    #3
  4. meeee

    meeee Member

    إنضم إلينا في:
    ‏28 مارس 2006
    المشاركات:
    886
    عدد المعجبين:
    1,382
    If you have have a parry people mover you just undo the grub screws and slide the wheels in. You might get a few issues when they work loose and it falls over in Caernarfon station but i suppose if you have a PPM then that's the least of your worries :smt003

    Tim
     
    meeee, ‏14 يناير 2009
    #4

مشاركة هذه الصفحة