If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Coach Brake Blocks

Discuție în 'Heritage Rolling Stock' creată de markb846, 26 Ian 2011.

  1. markb846

    markb846 New Member

    Înscris:
    29 Dec 2010
    Mesaje:
    149
    Aprecieri primite:
    0
    Does anybody know of a supplier other than Unipart Rail of R1 coach brake blocks?
    Thanks in advance.
    Mark B
     
  2. osprey

    osprey Resident of Nat Pres

    Înscris:
    3 Oct 2007
    Mesaje:
    10.498
    Aprecieri primite:
    2.857
    Ocupație:
    semi-retired, currently doing R&D for my patents
    Locație:
    Halifax
  3. markb846

    markb846 New Member

    Înscris:
    29 Dec 2010
    Mesaje:
    149
    Aprecieri primite:
    0
    Thanks I have run across this company before. They only supply composite brake blocks for coaches. They do however supply cast iron blocks for some industrial diesel locos.
     
  4. osprey

    osprey Resident of Nat Pres

    Înscris:
    3 Oct 2007
    Mesaje:
    10.498
    Aprecieri primite:
    2.857
    Ocupație:
    semi-retired, currently doing R&D for my patents
    Locație:
    Halifax
    I,m curious about composite blocks. Are these carbon/carbon or carbon ceramic composites?
     
  5. markb846

    markb846 New Member

    Înscris:
    29 Dec 2010
    Mesaje:
    149
    Aprecieri primite:
    0
    Not too sure what the friction material is made from I expect it is a trade secret. They are very light compared to a cast iron block. They claim to have a constant friction factor, and run quiter than an iron block.
    Out of interest Eurostar/TGV motor bogies are fitted with compo blocks, but they only come into play at speeds around 20 MPH. At higher speeds the main braking effort comes from the rheo brake.
     
  6. INSPIRATION

    INSPIRATION New Member

    Înscris:
    23 Feb 2010
    Mesaje:
    118
    Aprecieri primite:
    9
    unipart Rail can supply blocks of about 100 on a pallet, about £18 each.

    I found RVEL in the Derby RTC buisiness Park usefull(the former FM Rail depot). I wanted 16 blocks for one vehicle. They can supply small quantities if need be it seems. Contact them from their website.
    They have R1 and R2, plus blocks for diesel locos like R5.

    http://www.rvel.co.uk/

    go to "part sales".
     
  7. markb846

    markb846 New Member

    Înscris:
    29 Dec 2010
    Mesaje:
    149
    Aprecieri primite:
    0
    Thanks. The line of thought is we may go for a pallet of R1 blocks from Unipart Rail, and also conduct a controlled trial with the composite blocks.
    Mark B
     
  8. INSPIRATION

    INSPIRATION New Member

    Înscris:
    23 Feb 2010
    Mesaje:
    118
    Aprecieri primite:
    9
    Although composition blocks do last longer, from what I remember they seem to lock the wheels easier (depending on who is applying the brakes in the cab!). Iron blocks will also smooth out minor flats abit where as composite tend to get torn up by the metal burs from the flat.
     
  9. markb846

    markb846 New Member

    Înscris:
    29 Dec 2010
    Mesaje:
    149
    Aprecieri primite:
    0
    This is why we are looking to conduct a test. The only experience I have with composite brake blocks is on Eurostar power cars. But here the main braking effort comes from the Rheo system. The friction brakes only come into play at lower speeds. We do not seem to have wheel damage, but the blocks do sometimes receive impact damage.
     
  10. D1039

    D1039 Guest

    Hi, I had PM'd because I wasn't sure what was public knowledge, but...

    The Severn Valley Railway purchased "about 20 years supply of BR [carriage] brake blocks" in 2010, part of which "may be recoverable by sales" (SVR News Spring 2010).

    Patrick
     

Distribuie pagina asta