If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

What's this ?

Discuție în 'Steam Traction' creată de david1984, 9 Sep 2013.

  1. david1984

    david1984 Resident of Nat Pres

    Înscris:
    13 Sep 2005
    Mesaje:
    12.910
    Aprecieri primite:
    1.387
    Sex:
    Masculin
    Locație:
    Birmingham
    What's the front end arrangement about on this New Zealand loco: http://www.flickr.com/photos/foxmg/2878628178/in/pool-mainlinesteamnz
     
  2. 5944

    5944 Resident of Nat Pres

    Înscris:
    14 Ian 2006
    Mesaje:
    8.866
    Aprecieri primite:
    9.276
    Sex:
    Masculin
    Ocupație:
    Train Maintainer for GTR at Hornsey
    Locație:
    Letchworth
    Heritage Railway Volunteer:
    No I do not currently volunteer
    http://www.flickr.com/photos/51585012@N06/8438315946/

    Plenty of photos with and without that arrangement. Looks cosmetic, rather than serving any practical purpose. I assume you did what I did and looked to see what the loco was when Mr. Morgan posted that link on Four Foot?
     
  3. david1984

    david1984 Resident of Nat Pres

    Înscris:
    13 Sep 2005
    Mesaje:
    12.910
    Aprecieri primite:
    1.387
    Sex:
    Masculin
    Locație:
    Birmingham
    Pretty much, I just can't work out why you would enclose the smokebox like that, why have doors infront of the smokebox door ?.

    Edit - http://www.mainlinesteam.co.nz/ka942.html

    Reading that, it looks like a comedy attempt at streamlining, a Kiwi Spamcan, who'd of thought it ;)
     
  4. nickt

    nickt Member

    Înscris:
    17 Apr 2009
    Mesaje:
    489
    Aprecieri primite:
    259
    Sex:
    Masculin
    As it was converted to oil firing when the equipment and its casing was fitted they may have expected to require less frequent access to the smokebox. The link

    http://www.mainlinesteam.co.nz/ka942.html explains what's going on.
     
  5. dhic001

    dhic001 Member

    Înscris:
    20 Ian 2008
    Mesaje:
    312
    Aprecieri primite:
    35
    Locație:
    New Zealand
    The Ka's were fitted with these front ends for cosmetic reasons. basically a form of streamlined casing, although lacking much streamlined form! The casing did hide some of the gear on the front of the engine. Oil firing doesn't come into it, as they were built as coal burners and 'streamlined' from new. Likewise the J's were 'streamlined' too, but in a different from. L8ike most 'Streamlined' engines, the Ka's and J's lost the casings later in life and became almost indistinguishable from the K's and Ja's.
    Daniel
     
  6. class8mikado

    class8mikado Part of the furniture

    Înscris:
    1 Iun 2009
    Mesaje:
    3.840
    Aprecieri primite:
    1.644
    Ocupație:
    Print Estimator/ Repository of Useless Informatio.
    Locație:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    What was that other odd ball to come out of NZ... ah yes OVS bulleid
     
  7. Jamessquared

    Jamessquared Nat Pres stalwart

    Înscris:
    8 Mar 2008
    Mesaje:
    27.804
    Aprecieri primite:
    64.502
    Locație:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The precursor to the Ka was the K class, built in the 1930s. The significant difference between the two classes was in the frame design; the K's had frames which were prone to cracking; the Ka 's had extensively strengthened frames, as well as numerous other detail differences. There is a preserved K at MOTAT; it's a bit hard to photograph, but here is my attempt, including a view of the standard (non-streamlined) front end.

    http://www.flickr.com/photos/jamessquared/9710515027/
    http://www.flickr.com/photos/jamessquared/9710559195/

    The J's and Ja's that Daniel mentions were a smaller 4-8-2 design. They were supposedly recorded at over 75mph across the Canterbury plains, easily outrunning the cars during the 1950s - not bad for 4'6" diameter wheels! This is a Ja1250:

    http://www.flickr.com/photos/jamessquared/8590986469/

    Tom
     
  8. Spamcan81

    Spamcan81 Nat Pres stalwart

    Înscris:
    25 Aug 2007
    Mesaje:
    35.839
    Aprecieri primite:
    22.283
    Ocupație:
    Training moles
    Locație:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    OVS was born in New Zealand.
     
  9. Spamcan81

    Spamcan81 Nat Pres stalwart

    Înscris:
    25 Aug 2007
    Mesaje:
    35.839
    Aprecieri primite:
    22.283
    Ocupație:
    Training moles
    Locație:
    The back of beyond
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Oi, wash your mouth with soap and water. And he was a "who" not a "what."
     

Distribuie pagina asta