Things are progressing with 1181. It is a bit of a spare time project, gets pushed back when other railway projects take priority, currently have...
The valves in question look a little like this: http://www.heritagesteamsupplies.co.uk/Z-Heritage-Steam-Supplies/Blowdown-Valves/p-297-1175. A...
Has anyone had any experience overhauling bronze plug valves , the type typically used on blow downs etc. We have tried to overhaul 2 vavles, a...
Sorry can't help with the water valves, but we have just recieved the patterns back for Andrew Barlay pattern clack/check valves. We are making a...
Hi I was wondering if any one had ever came across a lamp like the attached image. This type of lamp was fitted to Andrew Barclay locomotives...
Thanks Ian, I have forwarded this information to our plans guru, who has called and spoken with the staff at Glasgow a couple of times. Hopefully...
Hi Dick Yes the drawings are very useful. We had no details of the tank at all, apart from the length which we got out of the locomotive...
Hi Ian Thanks for your most useful reply. The loco is definitly a Andrew Barclay product, built 1909. It interesting you mention those books,...
Hello I was wondering if anyone out there has a more complete list of Barclay works numbers and discriptions for the locomotives produced by...
Hi Sorry only just seen this post. Yes we managed to get the injector (only working on one at this stage the other side is working reasonably...
Thanks for your info. Going to have a go at what you guys have sugested this week. We are using the original copper pipes that came with the loco...
Thanks for the pictures. The cones in the 3mm ones are definitly seperate, the have the pinch bolts as per the CI ones. As you say the steam cone...
Yes thats the ones. They are made of Bronze being the only difference. I thought about grabing these ones on ebay for 1181 but think they will be...
Mainly having trouble with them wasting and not feeding. Mainly want to figure out how to get the cones out. Thought some of those on here may...
Hello All I am looking for any blueprints or similar anyone may have for a 3mm Barclay injector. We are having a spot of trouble with the...
Имена участников (разделяйте запятой).
