If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Regauging loco

Тема в разделе 'Miniature Railways', создана пользователем 73129, 28 дек 2008.

  1. 73129

    73129 Part of the furniture

    Дата регистрации:
    24 сен 2007
    Сообщения:
    4.548
    Симпатии:
    1.186
    Адрес:
    Winchester
    Hi all please can someone answer a question for me. I’ve been reading Railway magazine and someone from the MHR has purchased a 12 1/4in gauge loco from Fairbourne Railway (T.J. Thurston 4-6-2 built in 1948) but this loco will need to be regauged to 10 1/4in. How easy is it to regauge a loco and what would you need to do to it?


    Thanks
     
    73129, 28 дек 2008
    #1
  2. rough-shunter

    rough-shunter Guest

    new axels and possibly moving the frames inwards slightly
     
    rough-shunter, 29 дек 2008
    #2
  3. ilvaporista

    ilvaporista Part of the furniture

    Дата регистрации:
    16 янв 2006
    Сообщения:
    4.356
    Симпатии:
    5.455
    Пол:
    Мужской
    Род занятий:
    C.Eng
    Адрес:
    On the 45th!
    To regauge a loco can be a pretty involved task. A lot depands on the type and construction of the loco. If you move the frames in and the firebox just fits between the frames then the boiler will need re-working /replacing. There is no standard list of what work neds doing, every case needs a careful study before starting.
     
    ilvaporista, 7 янв 2009
    #3
  4. meeee

    meeee Member

    Дата регистрации:
    28 мар 2006
    Сообщения:
    886
    Симпатии:
    1.382
    If you have have a parry people mover you just undo the grub screws and slide the wheels in. You might get a few issues when they work loose and it falls over in Caernarfon station but i suppose if you have a PPM then that's the least of your worries :smt003

    Tim
     
    meeee, 14 янв 2009
    #4

Поделиться этой страницей