If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Disability access

本贴由 Robkitchuk 于 2021-01-29 发布. 版块名称: Heritage Rolling Stock

  1. Robkitchuk

    Robkitchuk Member

    注册日期:
    2013-06-07
    帖子:
    324
    支持:
    358
    性别:
    男
    所在地:
    Durham
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Hello all,
    Been asked to look into converting a guards van (LMS) into an accessible vehicle. Whilst I can find basic specifications, these don't apply to historic rail vehicles specifically.

    Does anyone have experiences or specifications from their own projects?

    Thank you in advance!
     
    Robkitchuk, 2021-01-29
    #1
  2. Steve

    Steve Resident of Nat Pres Friend

    注册日期:
    2006-10-07
    帖子:
    12,729
    支持:
    11,847
    职业:
    Gentleman of leisure, nowadays
    所在地:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Have you had a look at The Rail Vehicle Accessibility (Non-Interoperable Rail System) Regulations 2010? That will give you some guidance on what is required. If you are modifying a vehicle to be accessible you really should be looking at complying with this as much as you reasonably can. In your case it is largely going to be to provide a wheelchair accessible doorway. If it is your LMS Dia D1659 van, I think that has structural cross bracing that will get in the way and an inconvenient brake column in the middle. Not the easiest one to deal with but not impossible.
     
    Steve, 2021-01-29
    #2

分享此页面