If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

92245 and the lost Franco-Crosti

Тема в разделе 'Steam Traction', создана пользователем m&gn50, 30 мар 2015.

  1. m&gn50

    m&gn50 New Member

    Дата регистрации:
    17 мар 2009
    Сообщения:
    136
    Симпатии:
    17
    Can't help noticing this is getting cut up, or sectioned, same thing. If 77020/1/2 goes ahead then we'll have the full Standard house save the above. Not being my field entirely, after the pre heat was isolated, good locos? Fire box etc same, could an existing boiler be modified, with new smokebox, or new build? Any interest? Be interesting if anyone worked on them anyway.
     
  2. Corbs

    Corbs Well-Known Member

    Дата регистрации:
    17 июл 2008
    Сообщения:
    1.719
    Симпатии:
    763
    ISTR someone saying they were regarded as having the power of an 8F but given the same duties as other 9Fs, and that power was still down from a 'normal' 9F even after rebuilding.
     
  3. LMS2968

    LMS2968 Part of the furniture

    Дата регистрации:
    1 сен 2006
    Сообщения:
    3.072
    Симпатии:
    5.361
    Пол:
    Мужской
    Род занятий:
    Lecturer retired: Archivist of Stanier Mogul Fund
    Адрес:
    Wigan
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    They were generally regarded as 8Fs and used as such. On the Shotwicks on the Wirral, they were allowed one bogie wagon less that the standard 9Fs, same as a Stanier 8F.
     
    houghtonga и Corbs нравится это.
  4. ssk2400

    ssk2400 New Member

    Дата регистрации:
    14 ноя 2010
    Сообщения:
    180
    Симпатии:
    40
    Пол:
    Мужской
    Род занятий:
    electrical engineer
    Адрес:
    South cumbria
    Heritage Railway Volunteer:
    No I do not currently volunteer
    What was the advantage over this type of boiler compared to standard ?
     
  5. Jimc

    Jimc Part of the furniture

    Дата регистрации:
    8 сен 2005
    Сообщения:
    4.117
    Симпатии:
    4.821
    Род занятий:
    Once computers, now part time writer I suppose.
    Адрес:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Feedwater heating. In theory it should make for more economical running and maybe even better boiler life. In practice, like a number of these things, it never seemed to work quite as well as you'd think it ought to. This was especially true when trying to cram into the british loading gauge.
     
  6. MellishR

    MellishR Resident of Nat Pres Friend

    Дата регистрации:
    16 апр 2009
    Сообщения:
    8.913
    Симпатии:
    5.851
    Given the disappointing performance of the Crosti-boilered 9Fs, both with and without the feedwater heaters in use, and the very limited use that would result even if the immense cost of restoration to working order could ever be found, sectioning for display would seem an appropriate fate.
     
  7. 5944

    5944 Resident of Nat Pres

    Дата регистрации:
    14 янв 2006
    Сообщения:
    8.866
    Симпатии:
    9.278
    Пол:
    Мужской
    Род занятий:
    Train Maintainer for GTR at Hornsey
    Адрес:
    Letchworth
    Heritage Railway Volunteer:
    No I do not currently volunteer
    It worked quite well on horrendously inefficient Italian locos, but not so well on a modern UK loco.
     
  8. maddog

    maddog New Member

    Дата регистрации:
    7 апр 2011
    Сообщения:
    194
    Симпатии:
    89
    Given that 9Fs rarely if ever are taxed on preserved lines a crosti-boiler would perhaps make a more attractive financial locomotive in fuel costs.

    Given how ugly they were and the problems that were had with them and presumably it'd cost a fair bit to convert a loco i can't see it happening. If they were fondly and widely remembered it would perhaps be different.
     
  9. meeee

    meeee Member

    Дата регистрации:
    28 мар 2006
    Сообщения:
    886
    Симпатии:
    1.382
    Feed water heaters of various designs have been successfully used all over the world and are a sound idea. The Franco-Crosti idea of using waste heat from the exhaust requires a lot of space for the pre-heater and the exhaust steam jacket that insulates it. I suspect the 9f just didn't have enough space to make the system big enough to make a difference.

    They wouldn't be much use on a preserved railway though. Preserved locos spend a lot of time stood still or coasting, and the system works best when the loco is working hard.

    Tim
     
  10. 26D_M

    26D_M Part of the furniture

    Дата регистрации:
    22 окт 2009
    Сообщения:
    4.416
    Симпатии:
    1.681
    It would be nice if a benefactor could be found to at least cosmetically restore this 9F as a monument to Crewe Works.
    Maybe Mr Hosking's people could use 92212 as a donor being one of the common or garden Swindon examples
     
  11. 46118

    46118 Part of the furniture

    Дата регистрации:
    16 сен 2005
    Сообщения:
    4.043
    Симпатии:
    212
    92245 is apparently to be used in some way as a tribute to Woodhams, but the boiler has been removed to Peak Rail for overhaul, and presumably further use.
    Does anyone know what that further use might be, and has there been a change of ownership involved?

    46118
     
  12. Miff

    Miff Part of the furniture Friend

    Дата регистрации:
    17 июн 2008
    Сообщения:
    3.004
    Симпатии:
    3.025
    I think all the photos I've ever seen of the Crosti 9Fs showed them in a pretty filthy condition. Are there any pristine and shining ex-works pictures anywhere?
     
  13. m&gn50

    m&gn50 New Member

    Дата регистрации:
    17 мар 2009
    Сообщения:
    136
    Симпатии:
    17
  14. PolSteam

    PolSteam Member

    Дата регистрации:
    28 янв 2015
    Сообщения:
    529
    Симпатии:
    131
    Пол:
    Мужской
    Род занятий:
    Retired, owner of Wickham type 17a TP57P
    Адрес:
    Fleet, Hampshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Oh well it takes all sorts, I suppose.

    There seems to be so many NEW BUILD projects, why not get together and build a batch of new engines just for preserved lines?

    Basic idea. Modern design, with no need for ash pits or going underneath to oil up.

    Something with SC smoke box, and rocking grate, for lazy crews who need to get to the pub in a hurry. Two cylinder Walschaerts valve gear, Main bearings all roller, and central lubrication. Boiler all steel welded construction. Fabricated cylinder blocks. Electric lights in the cab, and for oiling up, either from batteries, or steam turbine.

    Basic shape and size? Something 4MT?
     
  15. Jimc

    Jimc Part of the furniture

    Дата регистрации:
    8 сен 2005
    Сообщения:
    4.117
    Симпатии:
    4.821
    Род занятий:
    Once computers, now part time writer I suppose.
    Адрес:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    With preserved lines needing to be good neighbours, are s/c smokebox really desirable?
     
  16. PolSteam

    PolSteam Member

    Дата регистрации:
    28 янв 2015
    Сообщения:
    529
    Симпатии:
    131
    Пол:
    Мужской
    Род занятий:
    Retired, owner of Wickham type 17a TP57P
    Адрес:
    Fleet, Hampshire
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    OK. lets say optional SC Smoke Box.

    Oh, I forgot, compensated suspension, on driving axles. No more messing around with springs!
     

Поделиться этой страницей