If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Tender journal scrapping size questions

Rasprava u 'Locomotive Engineering M.I.C' pokrenuta od mcjlf1, 5. Kolovoz 2007..

Stranica 2 od 2
  1. mcjlf1

    mcjlf1 New Member

    Pridružen(a):
    20. Listopad 2006.
    Poruka:
    107
    Lajkova:
    21
    Spol:
    Muškarac
    Interesi:
    Engineering Manager
    Grad:
    London
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Thanks for that. Might be able to make some decisions about what to do with the axles now.

    Thanks again...

    James
     
    mcjlf1, 13. Studeni 2007.
    #21
  2. scarle

    scarle New Member

    Pridružen(a):
    16. Veljača 2007.
    Poruka:
    26
    Lajkova:
    2
    mcjlf.

    If your worried about the scrapping size of the journal and you dont want to replace the axle, maybe you can find a spare Fowler tender wheel lying around some railway. I guess there are very few place's you can get a forged axle in the UK, it's just a thought. I am not so sure who can press the axles on either.
     
    scarle, 13. Studeni 2007.
    #22
  3. mcjlf1

    mcjlf1 New Member

    Pridružen(a):
    20. Listopad 2006.
    Poruka:
    107
    Lajkova:
    21
    Spol:
    Muškarac
    Interesi:
    Engineering Manager
    Grad:
    London
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Good idea - but I don't now if there are any spare fowler or other LMS tenders around these days, as most are assigned to locos?? Anybody?

    As regards making a new axle and pressing the wheels on....well that's a whole other ball game. Sounds expensive. Anybody done this? Braunton presumably has the same issue?
     
    mcjlf1, 13. Studeni 2007.
    #23
  4. Dan Hamblin

    Dan Hamblin Part of the furniture

    Pridružen(a):
    27. Ožujak 2006.
    Poruka:
    2,557
    Lajkova:
    201
    Interesi:
    Rolling Stock Engineer
    Grad:
    Kent
    Doesn't Ian Riley have the capability of pressing axles onto wheels?

    Regards,

    Dan
     
    Dan Hamblin, 13. Studeni 2007.
    #24
  5. IKB

    IKB Member

    Pridružen(a):
    23. Ožujak 2006.
    Poruka:
    390
    Lajkova:
    30
    Apologies if this is drifting off thread but -
    Is ther anything Ian Riley doesn't have the capability to do?
    (apart from paint locos Brunswick Green)!
     
    IKB, 13. Studeni 2007.
    #25
Stranica 2 od 2

Podijelite ovu stranicu