If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Riveting Tooling

Тема в разделе 'Steam Traction', создана пользователем HarveyCoppock, 29 янв 2017.

  1. HarveyCoppock

    HarveyCoppock New Member

    Дата регистрации:
    13 фев 2012
    Сообщения:
    17
    Симпатии:
    5
    Does anyone know of a supplier of things like riveting sets, and dollies, and 2nd hand air hammers even, and rivets, hopefully in the Sheffield area. This is for 3/8 and 1/4" rivets, to get round heads. I figure many folks probably make sets and dollies, but that's what I've been asked about!
     
    HarveyCoppock, 29 янв 2017
    #1
  2. estwdjhn

    estwdjhn Member

    Дата регистрации:
    24 янв 2013
    Сообщения:
    342
    Симпатии:
    693
    Род занятий:
    Boilermaker
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    You can still buy guns suitable for small rivets. CP 4123 is the small caulking / baby riveting gun I'd use for 1/4 rivets.
    Available from any CP agent (I use Walt-Air near Tibshelf)

    Snaps for that size gun may be harder to come by new - I think most of the ones I use have been machined from air chisels and bolt drifts commonly available due the
     
    estwdjhn, 30 янв 2017
    #2
  3. JJG Koopmans

    JJG Koopmans Member

    Дата регистрации:
    12 ноя 2014
    Сообщения:
    382
    Симпатии:
    474
    Пол:
    Мужской
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Rivets were supplied by: http://www.sapphireproducts.co.uk/ when we needed them. Airtools were secondhand Ingersoll Rand handguns. Probably the rivet supplier will know present suppliers.
    Kind regards
    Jos Koopmans
     
    JJG Koopmans, 31 янв 2017
    #3

Поделиться этой страницей