If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Help wanted identifying a boiler plate.

Dieses Thema im Forum 'Railwayana' wurde von RalphW gestartet, 10 Juli 2017.

  1. RalphW

    RalphW Nat Pres stalwart Staff Member Administrator Friend

    Registriert seit:
    11 September 2005
    Beiträge:
    36.449
    Zustimmungen:
    9.908
    Geschlecht:
    männlich
    Beruf:
    Retired-ish, Part time rail tour steward.
    Ort:
    Northwich
    Heritage Railway Volunteer:
    No I do not currently volunteer
    The following has been moved from profile posts to here as it will get more views, I hope someone can help with the identification. RW


    I am a Curator at a community Museum in Quesnel, British Columbia, Canada, seeking information about a boiler plate in our collection. Marked A Barclay/Engineer/Kilmarnock/May1866. No. 407. Rectangular 3 cm thick, 49 cm wide , 37.5 cm high. From poking around on the internet it is earlier than the material in the Glasgow archives. Hoping someone can suggest some leads. It came into the collection with no history, but presumably was from an abandoned mining site.
    Our area opened up to "European" settlement with the discovery of Gold in the early 1860s- The Caribou Gold Rush.

    Elizabeth Hunter.
     
    RalphW, 10 Juli 2017
    #1
  2. 32110

    32110 Member

    Registriert seit:
    20 Mai 2006
    Beiträge:
    649
    Zustimmungen:
    794
    Geschlecht:
    männlich
    Beruf:
    Retired from full time paid work
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Any chance of a photograph of this plate? It might help us to help you. Certainly this is quite different from the well known Andrew Barclay locomotive makers plate.
     
    32110, 10 Juli 2017
    #2
  3. Martin Perry

    Martin Perry Nat Pres stalwart Staff Member Moderator Friend

    Registriert seit:
    15 April 2006
    Beiträge:
    16.551
    Zustimmungen:
    7.897
    Ort:
    1012 / 60158
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    It may not be a loco plate as the company did make other equipment.
     
    Martin Perry, 10 Juli 2017
    #3
  4. paulhitch

    paulhitch Guest

    The history of the Kilmarnock builders is rather complicated and there was another, supposedly independent organisation called Barclay and Company. However Andrew Barclay was a wilful character who wandered in and out of bankruptcy, so anything is possible. Eventually he was evicted from his own firm.

    PH
     
    paulhitch, 10 Juli 2017
    #4
  5. huochemi

    huochemi Part of the furniture

    Registriert seit:
    6 Mai 2008
    Beiträge:
    2.997
    Zustimmungen:
    1.516
    Geschlecht:
    männlich
    Ort:
    UK
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Are the measurements correct? The plate would be enormous. 3cm thick!? One normally would expect a boiler plate to be a small plate giving details of test etc. Buckle & Love show a loco worksplate with the same language other than a date of May 1863 and "No 17". It is brass, rectangular and has scalloped corners,
    8 5/8" x 4 1/4".
     
    huochemi, 10 Juli 2017
    #5
  6. Elizabeth Hunter

    Elizabeth Hunter New Member

    Registriert seit:
    9 Juli 2017
    Beiträge:
    1
    Zustimmungen:
    0
    Ort:
    Quensel, BC Canada
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Yes I was assuming it was stationary equipment. It is not like locomotive name plates. I am attaching images to confirm dimensions. Thanks E Hunter IMG_1142.JPG IMG_1143.JPG IMG_1147.JPG
     
    Elizabeth Hunter, 10 Juli 2017
    #6
  7. paulhitch

    paulhitch Guest

    Looks very much like a valve chest cover. A valve chest is part of a steam engine cylinder either for a locomotive or a stationary engine. The fact that there is a brass maker's plate attached suggests it is from a stationary engine as this component would not normally be easily visible on a locomotive.

    Paul H
     
    paulhitch, 10 Juli 2017
    #7
  8. 21B

    21B Part of the furniture

    Registriert seit:
    2 September 2009
    Beiträge:
    3.898
    Zustimmungen:
    8.668
    I think you may be right Paul. The thickness of the plate suggests this also, and it would be rare for a boiler component not to have curvature. Given the dimensions and the circumstantial evidence of it being in a mining area, it might suggest a single cylinder stationary engine for power or pumping? Pretty common for the builders plate to be on the valve chest of a stationary engine too.
     
    21B, 10 Juli 2017
    #8
    paulhitch gefällt dies.
  9. huochemi

    huochemi Part of the furniture

    Registriert seit:
    6 Mai 2008
    Beiträge:
    2.997
    Zustimmungen:
    1.516
    Geschlecht:
    männlich
    Ort:
    UK
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Thanks, that is useful to see it in context. As has been suggested, it looks like the valve chest cover of a stationary steam engine, and the orientation suggests it is from a horizontal steam engine. If you Google for "horizontal steam engine" images, there are a few examples of engines with the maker's name either cast into or attached to the valve chest cover, although most images are either from the cylinder side or have the exhaust attached to the centre of the cover plate.
     
    huochemi, 11 Juli 2017
    #9
  10. Martin Perry

    Martin Perry Nat Pres stalwart Staff Member Moderator Friend

    Registriert seit:
    15 April 2006
    Beiträge:
    16.551
    Zustimmungen:
    7.897
    Ort:
    1012 / 60158
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    It could equally be the valve chest cover from a 'Weir' type pump.
     
    Martin Perry, 11 Juli 2017
    #10
  11. paulhitch

    paulhitch Guest

    Weir "type" pump possibly but it does not resemble anything off an actual Weir pump.

    Paul H
     
    paulhitch, 15 Juli 2017
    #11

Die Seite empfehlen