If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

CME 15/07/17

Discussie in 'What's Going On' gestart door pete12000, 12 jul 2017.

  1. henrywinskill

    henrywinskill Well-Known Member

    Lid geworden:
    3 nov 2005
    Berichten:
    2.347
    Leuk Bevonden:
    3.661
    Beroep:
    Transgender toilet attendant
    Locatie:
    North East
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Blooming heck Richard thats good compared to some we've seen today lol
     
    5098 vindt dit leuk.
  2. 5098

    5098 Well-Known Member

    Lid geworden:
    1 sep 2007
    Berichten:
    1.754
    Leuk Bevonden:
    1.895
    Locatie:
    Wetherby
    Yes, Henry, it's a cracker, and I didn't even have to stray from my armchair to get it!
     
    henrywinskill vindt dit leuk.
  3. 30567

    30567 Resident of Nat Pres Friend

    Lid geworden:
    7 aug 2012
    Berichten:
    6.153
    Leuk Bevonden:
    4.110
    It will be interesting to read @1020 Shireman report especially if he was able to speak to the crew at Carlisle. But on the face of it, a 5XP plus 12 in poor weather conditions produced a fairly predictable result. Over Shap and the S and C, the loco timed the train on the level and downhill and lost around 1.5 mins per 100 feet of climbing, say roughly the difference between 36mph and 25mph average on the climbs. Over Shap they start with a time window of about 30 mins to the following train and despite being 4 late out of the loop and dropping another 7 up to Shap they made it. Over Ais Gill, the loss of 22 mins proved crucial because......

    if you try to sandwich the train between the 1745 and 1803 trains from Clitheroe, it is fairly predictable you are going to get stopped at Whalley and then you will struggle with that load. On Shap it's vital to get a decent run at it ; same with Wilpshire.

    Let's hope they have some 7P/8P power available for these very demanding conditions.
     
  4. sgthompson

    sgthompson Part of the furniture Friend

    Lid geworden:
    12 jun 2008
    Berichten:
    4.010
    Leuk Bevonden:
    9.837
    Geslacht:
    Man
    Beroep:
    Tobacco manufacturing
    Locatie:
    Kendal
    On the Shap section 45690 actually held up nothing hence it wasn't looped
     
    sycamore vindt dit leuk.
  5. 26D_M

    26D_M Part of the furniture

    Lid geworden:
    22 okt 2009
    Berichten:
    4.416
    Leuk Bevonden:
    1.681
    +1 for that assessment, surprised the owner sanctioned such a flogging for 45690. Obviously no 7 or 8 available / suitable. In such circumstances a loco assisting would be perfectly understandable.
     
  6. Big Al

    Big Al Nat Pres stalwart Staff Member Moderator

    Lid geworden:
    30 mei 2009
    Berichten:
    22.738
    Leuk Bevonden:
    22.894
    Locatie:
    1016
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Pleased to see that the lateness of the CME coming south allowed NR to find a FL path that regained all bar 20 minutes by London. At times there is something to be said for modern traction and clearly this London CME model of operation works well and does allow for some recovery if things go wrong on the steam leg, whatever the reason. That said, down south, the margins are much tighter.
     
    30567 en Paul42 vinden dit leuk.
  7. 26D_M

    26D_M Part of the furniture

    Lid geworden:
    22 okt 2009
    Berichten:
    4.416
    Leuk Bevonden:
    1.681
    It's been said before, for slogging a heavy load up hills a black five it better suited than a Jub but of course the former is limited to 60 on the racing stretches. Ultimately the advertised strategy of class 7 and 8s forming the pool is the right one but when the deadline arrives, as is so often the case, the intentions cannot be fulfilled for whatever reason. An assisting loco would have been a fair and reasonable precaution even without the benefit of hindsight.
    Is it known why 46233 is not being used?
     
  8. Groks212

    Groks212 Well-Known Member

    Lid geworden:
    5 apr 2009
    Berichten:
    1.152
    Leuk Bevonden:
    1.019
    Locatie:
    Nottingham
    Was having tubes replaced at Butterley 5 days ago.

    Dave B
     
    26D_M vindt dit leuk.
  9. Kylchap

    Kylchap Member

    Lid geworden:
    15 dec 2015
    Berichten:
    493
    Leuk Bevonden:
    936
    Geslacht:
    Man
    Locatie:
    East Anglia
    Heritage Railway Volunteer:
    No I do not currently volunteer
    What an awesome sight and sound climbing Shap! How thrilling to see a team with confidence in their loco so they'll let her go a bit beyond normal loading and a crew able to get the most out of her. Just like it used to be back in the day. What a difference to the "show pony" approach!
     
    banana patch, 60017 en Spamcan81 vinden dit leuk.
  10. MellishR

    MellishR Resident of Nat Pres Friend

    Lid geworden:
    16 apr 2009
    Berichten:
    8.996
    Leuk Bevonden:
    5.920
    But from the same TOC! Hence my curiosity as to how they make the decision.
     
  11. wcmlbls1846

    wcmlbls1846 Well-Known Member

    Lid geworden:
    24 apr 2009
    Berichten:
    1.038
    Leuk Bevonden:
    549
    The loading reflects the number of seats sold.

    Assisting loco? WCRC have never double-headed their trains, no doubt because of the cost. Only 45699 is available, and that would have to be brought across from York. 48151 is a 50mph goods engine banned from the WCML AFAIK as it is much too slow. 46115 seems to have finished, 35018 is not ready. Hence solo 45690 recreating the days when Newton Heath Jubilees regularly worked comparable loads unassisted between Manchester and Scotland.

    Andrew N
     
  12. Big Dave

    Big Dave Member

    Lid geworden:
    17 dec 2006
    Berichten:
    466
    Leuk Bevonden:
    26
    Geslacht:
    Man
    Beroep:
    Retired
    Locatie:
    Bewdley
    OK 12 is a good load for a Jube but if I had been in charge of 5690 on Shap I would have been very happy with the progress made, on the long drag who knows, horrible conditions, wind affecting the train and probably tricky rail conditions which may have affected a bigger loco also, maybe doing as much as conditions allow without provoking slipping.
     
  13. Paul42

    Paul42 Part of the furniture

    Lid geworden:
    17 jul 2006
    Berichten:
    6.117
    Leuk Bevonden:
    4.507
    Geslacht:
    Man
    Locatie:
    East Grinstead
    A CME starting in London was double headed due to the load on the 18th February 2012 see http://www.uksteam.info/tours/t12/t0218a.htm
    48151 has been over Shap when it stood in for 46115 on the 14th June 2014 ( I was on this trip) see http://www.uksteam.info/tours/t14/t0614d.htm
     
  14. 26D_M

    26D_M Part of the furniture

    Lid geworden:
    22 okt 2009
    Berichten:
    4.416
    Leuk Bevonden:
    1.681
    Totally agree it was actually a creditable performance in the circumstances but then that is the point, the circumstances ought not to have arisen?
    Surely the TOC and charter operator have sufficient communication to know motive power and hence max loading? Over selling perhaps then?
    Or maybe 46233 was a last minute drop out?
     
  15. 26D_M

    26D_M Part of the furniture

    Lid geworden:
    22 okt 2009
    Berichten:
    4.416
    Leuk Bevonden:
    1.681
    Would they not have had a Tebay banker over Shap on that load? Not sure myself so puuting it out there for better insight.
     
  16. wcmlbls1846

    wcmlbls1846 Well-Known Member

    Lid geworden:
    24 apr 2009
    Berichten:
    1.038
    Leuk Bevonden:
    549
    Ta, I had forgotten the Black 5s on 18 Feb 2012, even though I photographed them leaving Carnforth:

    https://andrewstransport.smugmug.com/Northwesttrains/North-West-Trains-2012/i-9fMtxk3

    Even so, I cannot recall two WCRC locos double heading.

    Andrew N
     
  17. 60017

    60017 Resident of Nat Pres Friend

    Lid geworden:
    6 jul 2008
    Berichten:
    9.120
    Leuk Bevonden:
    8.115
    Geslacht:
    Man
    Beroep:
    Retired from corporate slavery :o)
    Locatie:
    Fylde Coast
    Heritage Railway Volunteer:
    No I do not currently volunteer
    If any of those were the case, why didn't they put a box on the back? After all...they have been accused of doing just that before in similar scenarios!

    In among the wibble, well done to the crew and to Chris Beet for turning her out in a condition capable of such a grand performance :)
     
    Last edited: 16 jul 2017
    Victor, 46223 en Spamcan81 vinden dit leuk.
  18. wcmlbls1846

    wcmlbls1846 Well-Known Member

    Lid geworden:
    24 apr 2009
    Berichten:
    1.038
    Leuk Bevonden:
    549
    Not always as there are Eric Bruton photos of these workings (in British Steam 1948 - 1955, Ian Allan 1976) showing eg 45706 passing Tebay for Shap with load 13 and no banker. AN
     
  19. 26D_M

    26D_M Part of the furniture

    Lid geworden:
    22 okt 2009
    Berichten:
    4.416
    Leuk Bevonden:
    1.681
    As said up thread, an assisting loco would have been entirely justified. My assumption is that RTC tells TOC it has agreed the loco. TOC then specifies max loading and RTC sells tickets accordingly. If they had already sold 10 coaches worth of tickets, the TOC would have had to know in order to provide a sufficient rake. So all the information was in place.
    We do not know what the operational considerations taken account of by the TOC were but presumably a favourable risk assessment was made. Loads have been subject to formally published guidance, which is of course only that. The facts speak for themselves, a loco in good order with a capable crew was not able to keep time over the route with the given load. That is not a criticism, although I do not like to see such deeds of daring do despite their obvious visual and aural impression because it is essentially a vintage machine being worked at its limit. Obviously the owner makes that call and has to deal with the consequences. The other issue that could be a problem is if delays are subject to "please explain" and the root cause points at overloaded loco. That will not help the steam charter sector.
    It will be intetesting to see whether the situation is repeated.
     
  20. 26D_M

    26D_M Part of the furniture

    Lid geworden:
    22 okt 2009
    Berichten:
    4.416
    Leuk Bevonden:
    1.681
    Perhaps if 44932 was fit it may have been added, who knows. The positive determination to run diesel free is admirable and perhaps some of the complaints have been heeded, which is equally commendable.
    The crux is entirely as Andrew N describes, no single unit of suitable motive power available. It has been ever thus and it seems unlikely supply will meet demand any time soon.
     

Deel Deze Pagina