If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Baldwin "Lyn" new build.

Rasprava u 'Narrow Gauge Railways' pokrenuta od Meiriongwril, 25. Siječanj 2009..

  1. Felix Holt

    Felix Holt Guest

    I couldn't find much on the safety valves on Mike's pages (apart from a picture to prove they exist, though at that stage unfitted!). Until we hear otherwise, one has to assume the simplest explanation is that the valves on the modern loco don't sit as high as on the original and, so, are not visible in ground level photos. This could be for design reasons, for loading gauge reasons (at least for when visiting other lines), or to do with modern regulations.
    If we don't hear in the meantime, I'll ask on the 29 September when I'll be present at Woody Bay for the members-only launch day.
     
    Last edited by a moderator: 11. Rujan 2017.
    Mark Thompson, paulhitch i 30854 se sviđa ovo.
  2. clam1952

    clam1952 New Member

    Pridružen(a):
    3. Travanj 2012.
    Poruka:
    145
    Lajkova:
    52
    Spol:
    Muškarac
    Interesi:
    Retired
    Grad:
    Crewe Cheshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    30854 and Mark Thompson like this.
  3. Mark Thompson

    Mark Thompson Well-Known Member

    Pridružen(a):
    10. Rujan 2017.
    Poruka:
    1,595
    Lajkova:
    3,938
    Spol:
    Muškarac
    Grad:
    E sussex
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Well done for finding that, it's quite a way back!
    Yes they do look smaller than the originals, nonetheless I'm still surprised that nothing is visible above the dome cover. Like Felix says, it might well be a loading gauge issue. Was the L&B more generous than the WHR? Presumably Lyn would still not fit the FR
     
    andalfi1 and 30854 like this.
  4. brmp201

    brmp201 Member

    Pridružen(a):
    18. Svibanj 2010.
    Poruka:
    614
    Lajkova:
    964
    Spol:
    Muškarac
    Interesi:
    IT Director
    Grad:
    Surrey, UK
    Heritage Railway Volunteer:
    No I do not currently volunteer
  5. clam1952

    clam1952 New Member

    Pridružen(a):
    3. Travanj 2012.
    Poruka:
    145
    Lajkova:
    52
    Spol:
    Muškarac
    Interesi:
    Retired
    Grad:
    Crewe Cheshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    From Steven Phillips L&B Measured and Drawn, loading Gauge was 9' 6" same as the FR pre closure, width which I can't or haven't found yet, may have been a different problem though, Lyd had the ends of the Cowcatcher removed as well as the re-profiled cab roof for Garnedd Tunnel.

    I'm actually reconstructing the L&B for the Trainz Railway Simulator 1930's using Digital Elevation Modelling for the terrain thus the interest!
     
    Mark Thompson se sviđa ovo.
  6. fergusmacg

    fergusmacg Resident of Nat Pres

    Pridružen(a):
    17. Kolovoz 2008.
    Poruka:
    6,778
    Lajkova:
    4,148
    Interesi:
    Design Engineer
    Grad:
    Cumbria
    Can't help thinking - "what steps do you take if the pressure rises too high" - "bloody big ones" . . . .:)
     
  7. ilvaporista

    ilvaporista Part of the furniture

    Pridružen(a):
    16. Siječanj 2006.
    Poruka:
    4,356
    Lajkova:
    5,455
    Spol:
    Muškarac
    Interesi:
    C.Eng
    Grad:
    On the 45th!
    I have to say that the finished loco looks so perfect it could almost be a model. What a fantastic achievement.
     
    Old Kent Biker se sviđa ovo.
  8. Felix Holt

    Felix Holt Guest

    Safety valves pictured in latest Lynformation, so I guess mystery is solved!
     
    30854 and Mark Thompson like this.
  9. Mark Thompson

    Mark Thompson Well-Known Member

    Pridružen(a):
    10. Rujan 2017.
    Poruka:
    1,595
    Lajkova:
    3,938
    Spol:
    Muškarac
    Grad:
    E sussex
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Indeed! That was very timely.
     
  10. Old Kent Biker

    Old Kent Biker Member

    Pridružen(a):
    10. Siječanj 2007.
    Poruka:
    944
    Lajkova:
    1,512
    Spol:
    Muškarac
    Interesi:
    IT Consultant (retired)
    Grad:
    Kent UK
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    LF60-06a.jpg
    Still some work to be done on the safety valves, but here they are being tested... :)
     
    30854, Mark Thompson i clam1952 se sviđa ovo.
  11. Dan Hill

    Dan Hill Part of the furniture

    Pridružen(a):
    1. Kolovoz 2008.
    Poruka:
    2,757
    Lajkova:
    841
    Spol:
    Muškarac
    Interesi:
    Brick Machine Operator
    Grad:
    Haywards Heath
    Heritage Railway Volunteer:
    No I do not currently volunteer
    What a beauty, Maunsell Olive Green has always been a favourite livery of mine but is strange seeing it on a narrow gauge loco. She will look great alongside Lyd.
     
    Last edited: 11. Rujan 2017.
    30854, andrewshimmin i Mark Thompson se sviđa ovo.
  12. clam1952

    clam1952 New Member

    Pridružen(a):
    3. Travanj 2012.
    Poruka:
    145
    Lajkova:
    52
    Spol:
    Muškarac
    Interesi:
    Retired
    Grad:
    Crewe Cheshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    @ Old Kent Biker: Well that proves Lyn has working safety valves! Thanks for the picture!
     
  13. Old Kent Biker

    Old Kent Biker Member

    Pridružen(a):
    10. Siječanj 2007.
    Poruka:
    944
    Lajkova:
    1,512
    Spol:
    Muškarac
    Interesi:
    IT Consultant (retired)
    Grad:
    Kent UK
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    It's the same picture (one of two) of the safety valves I published in LYNfo60. I'm trying to find out from the project team why they are lower than on the original, and if that will always be the case...
     
  14. Greenway

    Greenway Part of the furniture

    Pridružen(a):
    16. Ožujak 2008.
    Poruka:
    4,019
    Lajkova:
    3,804
    Spol:
    Muškarac
    Grad:
    South Hams
    Heritage Railway Volunteer:
    No I do not currently volunteer
    A great achievement which I hope to see running in my County sometime.
     
  15. Mark Thompson

    Mark Thompson Well-Known Member

    Pridružen(a):
    10. Rujan 2017.
    Poruka:
    1,595
    Lajkova:
    3,938
    Spol:
    Muškarac
    Grad:
    E sussex
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Its amazing to see it finally leap into tangible life from off the pages of old black and white photos. I'd planned to get down to Woody on the 29th, but it looks like boring, stupid obligations will keep me here that weekend.
     
  16. GWR Man.

    GWR Man. Well-Known Member

    Pridružen(a):
    8. Listopad 2014.
    Poruka:
    2,259
    Lajkova:
    2,695
    Spol:
    Muškarac
    Grad:
    Taunton
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Corrected your mistake so you don't arrive a month late. Also just had a chat on the phone to the fireman who is involved with me helping to restore a railway coach, who will be firing the engine on that day and the weekend and he is looking forward to getting hold of the shovel and putting the coal into the firebox.
     
    Felix Holt and Mark Thompson like this.
  17. Mark Thompson

    Mark Thompson Well-Known Member

    Pridružen(a):
    10. Rujan 2017.
    Poruka:
    1,595
    Lajkova:
    3,938
    Spol:
    Muškarac
    Grad:
    E sussex
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Many thanks for your efforts, Martyn. The excitement at Woody must be palpable by now! So frustrating about the injectors, though.
     
  18. Mark Thompson

    Mark Thompson Well-Known Member

    Pridružen(a):
    10. Rujan 2017.
    Poruka:
    1,595
    Lajkova:
    3,938
    Spol:
    Muškarac
    Grad:
    E sussex
    Heritage Railway Volunteer:
    No I do not currently volunteer
    He's a lucky guy! I can well imagine that Lyn is going to be a very powerful engine, and on an autumn day, when the gales start pummelling in off the Bristol Channel, that 762s cab will be a very enviable place to be.
     
    30854 and lynbarn like this.
  19. Old Kent Biker

    Old Kent Biker Member

    Pridružen(a):
    10. Siječanj 2007.
    Poruka:
    944
    Lajkova:
    1,512
    Spol:
    Muškarac
    Interesi:
    IT Consultant (retired)
    Grad:
    Kent UK
    Heritage Railway Volunteer:
    Yes I am an active volunteer

    In response to the safety valve enquiry above, 762 Club Project Manager Peter Best says
    "The boiler is [rated at] 250 psi, much higher than the original, so we needed to use modern high release valves. LYN is not a replica but a modern engine, constructed to look similar to the original."

    So I hope that explains. Not quite the same as in 1898, but heck, I can live with that! :D
     
    Dag Bonnedal, 30854 i Mark Thompson se sviđa ovo.
  20. lynbarn

    lynbarn Well-Known Member

    Pridružen(a):
    22. Kolovoz 2006.
    Poruka:
    1,564
    Lajkova:
    547
    Spol:
    Muškarac
    Interesi:
    Retired
    Grad:
    Kent
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Like most new locos has anyone sent any comfy blankets to Woody Bay in advance of LYN's arrival? can't wait to see her at Woody..........................
     
    Felix Holt se sviđa ovo.

Podijelite ovu stranicu