If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Slacking Dimensions?

Discuție în 'Locomotive Engineering M.I.C' creată de jonathonag, 3 Feb 2008.

Pagina 3 din 3
  1. olly5764

    olly5764 Well-Known Member

    Înscris:
    29 Dec 2006
    Mesaje:
    1.887
    Aprecieri primite:
    1.017
    Sex:
    Masculin
    Ocupație:
    Engineer
    Locație:
    Normally in a brake van somewhere
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    yup, and I have had drawings at work from a company in france supplying to the States, calling for a bolt with a 25.4 x 3.175 pitch x 60 degree thread, or as engineers would know it, 1" 8un
     
    olly5764, 6 Apr 2008
    #41
  2. Kerosene Castle

    Kerosene Castle Well-Known Member

    Înscris:
    2 Apr 2006
    Mesaje:
    1.345
    Aprecieri primite:
    0
    Locație:
    Hell, aka Hull
    If you're going to mix the two up, you really should do it properly; ie '7 foot 6 mil'.

    Who says metric and imperial can't work together?
     
    Kerosene Castle, 6 Apr 2008
    #42
  3. boldford

    boldford Member

    Înscris:
    22 Aug 2005
    Mesaje:
    435
    Aprecieri primite:
    2
    Failing miserably to resist the temptation to enter pedant mode.

    You mean 6.35mm, don't you?
     
    boldford, 6 Apr 2008
    #43
  4. olly5764

    olly5764 Well-Known Member

    Înscris:
    29 Dec 2006
    Mesaje:
    1.887
    Aprecieri primite:
    1.017
    Sex:
    Masculin
    Ocupație:
    Engineer
    Locație:
    Normally in a brake van somewhere
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I don't know Brian, give you 25.4 mm, you take .914 meters!
     
    olly5764, 16 Apr 2008
    #44
Pagina 3 din 3

Distribuie pagina asta