If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

The perfect 'new' engine for preserved railways?

Discussion in 'Steam Traction' started by JayDee, Aug 28, 2018.

  1. Gwenllian2001

    Gwenllian2001 Member

    Joined:
    Feb 15, 2007
    Messages:
    307
    Likes Received:
    6
    Occupation:
    Retired
    Location:
    Maesteg
    Seconded. They were lovely locos, versatile and we'll liked by their crews. A parallel boiler would be nice too. All had been re-boilered at the time of withdrawal although some retained the round top tanks until the end. I have fond memories of them on the Vale of Glamorgan line where they ran like Swiss watches at speed and flying down the bank from Lavernock to Penarth with six on in near silence. Beautiful locos, sadly missed by enthusiasts and professionals alike.
     
  2. martin1656

    martin1656 Nat Pres stalwart Friend

    Joined:
    Dec 8, 2014
    Messages:
    17,609
    Likes Received:
    11,222
    Gender:
    Male
    Location:
    St Leonards
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Starting with a clean piece of paper, so 2-6-2 wheel arrangement , either tender , or tank loco,
    2 outside cylinders taper boiler, self cleaning smokebox 2 sets of walcherts valve gear roller bearings on all axles, hopper ashpan, rocking grate double chimney, high running plate so maintaince is easy, looks wise it would be a 2-6-2 version of a Britannia with a br1d tender. powerful enough to take the heaviest loads any preserved line can offer, but equally with a high degree of super heat, economical at the same time
     
  3. JJG Koopmans

    JJG Koopmans Member

    Joined:
    Nov 12, 2014
    Messages:
    382
    Likes Received:
    474
    Gender:
    Male
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Sorry, double chimney is a dumb solution!
    Kind regards
    Jos Koopmans
     
  4. martin1656

    martin1656 Nat Pres stalwart Friend

    Joined:
    Dec 8, 2014
    Messages:
    17,609
    Likes Received:
    11,222
    Gender:
    Male
    Location:
    St Leonards
    Heritage Railway Volunteer:
    No I do not currently volunteer
    i'm assuming you would go lampor and single chimney ?
     
  5. JJG Koopmans

    JJG Koopmans Member

    Joined:
    Nov 12, 2014
    Messages:
    382
    Likes Received:
    474
    Gender:
    Male
    Heritage Railway Volunteer:
    No I do not currently volunteer
    No Lampor/Lempor, just a single chimney and 4 proportioned orifices, let the chimney do the work it is designed for!
    Kind regards
    Jos Koopmans
     
  6. johnofwessex

    johnofwessex Resident of Nat Pres

    Joined:
    Apr 6, 2015
    Messages:
    9,185
    Likes Received:
    7,226
    Gender:
    Male
    Occupation:
    Thorn in my managers side
    Location:
    72
    Heritage Railway Volunteer:
    No I do not currently volunteer
    The loco Bulleid should have built instead of Leader
     
  7. Jimc

    Jimc Part of the furniture

    Joined:
    Sep 8, 2005
    Messages:
    4,052
    Likes Received:
    4,665
    Occupation:
    Once computers, now part time writer I suppose.
    Location:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Pollution from a self cleaning smokebox is surely unacceptable in the 21stC - especially if your line has neighbours.
     
    Jamessquared likes this.
  8. Hermod

    Hermod Member

    Joined:
    May 6, 2017
    Messages:
    985
    Likes Received:
    283
    Gender:
    Male
    Location:
    Klitmoeller,Denmark
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Holdens Decapod.
    All adhession and capable of 25mph.
    When the ruling class women deem coalfiring is unethical ,there will be room inside the boiler outline for LNG gasfiring with synthetic coal smell
     
    Last edited: Aug 31, 2018
  9. JayDee

    JayDee Member

    Joined:
    Dec 15, 2017
    Messages:
    354
    Likes Received:
    272
    Gender:
    Male
    Location:
    Swadlincote
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Honestly I'd probably be very radical thinking on it some more.

    So, oil fired, (Fuel oil, rapeseed) one of Mr Waller's Electric heating closed loop units to raise steam/keep the engine warm without needing to burn stuff, remote control so you can have a push-pull option to more national standards...
     
  10. johnofwessex

    johnofwessex Resident of Nat Pres

    Joined:
    Apr 6, 2015
    Messages:
    9,185
    Likes Received:
    7,226
    Gender:
    Male
    Occupation:
    Thorn in my managers side
    Location:
    72
    Heritage Railway Volunteer:
    No I do not currently volunteer
    The LNER U1 Garrett

    (Awaits sound of massive explosion wiping out Hayling Island)
     
    Gareth likes this.
  11. RalphW

    RalphW Nat Pres stalwart Staff Member Administrator Friend

    Joined:
    Sep 11, 2005
    Messages:
    35,445
    Likes Received:
    9,143
    Gender:
    Male
    Occupation:
    Retired-ish, Part time rail tour steward.
    Location:
    Northwich
    Heritage Railway Volunteer:
    No I do not currently volunteer
    So many WIBNs, so few really practical suggestions.
     
  12. Miff

    Miff Part of the furniture Friend

    Joined:
    Jun 17, 2008
    Messages:
    2,857
    Likes Received:
    2,793
    But this is a fantasy thread, and no harm in that. There is no ‘perfect’ new engine because every railway has different needs and challenges. That’s one reason why there were so many different designs in the first place.

    All any railway needs is a fleet of six identical Barclay 0-4-0 saddle tanks, painted black. So long as it is perfectly flat.
     
    Matt37401 and 240P15 like this.
  13. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,099
    Likes Received:
    57,414
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    A fair number of practical suggestions on the first page, though to an extent it depended on which kind of unrepresented 2-6-4T you happen to like!

    Tom
     
  14. Eightpot

    Eightpot Resident of Nat Pres Friend

    Joined:
    Aug 10, 2006
    Messages:
    8,077
    Likes Received:
    2,264
    Gender:
    Male
    Occupation:
    Engineer Emeritus
    Location:
    Aylesbury
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Not forgetting the predecessor 0-6-6-0 to the Leader with a better Route Availability............
     
  15. Hermod

    Hermod Member

    Joined:
    May 6, 2017
    Messages:
    985
    Likes Received:
    283
    Gender:
    Male
    Location:
    Klitmoeller,Denmark
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Is a 2-6-4 t not an awfull lot of lost traction for given steel mass/amount of money on a max 25 mph locomotive?
     
  16. Gav106

    Gav106 Well-Known Member

    Joined:
    Mar 29, 2010
    Messages:
    1,741
    Likes Received:
    2,017
    Location:
    Nantwich, Cheshire
    While this thread is completely pointless and is supposed to just be a bit of fun, building 6 of the same class of loco at one place would be very much overkill, I think it depends on the location of a heritage railway as to whether they would need a 2-6-4t compared to something smaller. As said at the start a BR standard class 3 would be good enough for 99% of the heritage work, it probably wouldn't be good enough for the NMYR services. The BR class 4s have proved to be good enough so im guessing that that is the minimum power requirement needed up there. Horses for courses. Besides, why build 6 of the same when you can have much more fund building 4 or 5 different ones!
     
  17. johnofwessex

    johnofwessex Resident of Nat Pres

    Joined:
    Apr 6, 2015
    Messages:
    9,185
    Likes Received:
    7,226
    Gender:
    Male
    Occupation:
    Thorn in my managers side
    Location:
    72
    Heritage Railway Volunteer:
    No I do not currently volunteer
    A better question might be what can we build using the same parts?
     
  18. Jimc

    Jimc Part of the furniture

    Joined:
    Sep 8, 2005
    Messages:
    4,052
    Likes Received:
    4,665
    Occupation:
    Once computers, now part time writer I suppose.
    Location:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Doesn't that depend on how fast your overhauls get completed?
    Now, the folk who actually run a railway can correct me if I'm off beam, but the Bluebell, for instance, regularly has 3 locomotives in steam. Ideally, it seems to me, there'd be a 4th to be having boiler washout etc so it would be good to have 4 locomotives in service at all times. You're going to have at least one under overhaul at any time. However, assuming about 8 years between overhauls, which seems to be typical, you'd need to be completing your overhauls in under 2 years. If its more than two year's you'll need a 6th loco.
     
  19. JayDee

    JayDee Member

    Joined:
    Dec 15, 2017
    Messages:
    354
    Likes Received:
    272
    Gender:
    Male
    Location:
    Swadlincote
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The idea of forcing people to just "pick one" was to see what people's "shopping list" of steam would boil down to. (The tank and tender mini-britannias were easily the most intriguing) I'm basing the steam fleet on rough Home Fleet figures of the "Premier league" lines which seems to have a strength of a minimum of six.
     
  20. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,099
    Likes Received:
    57,414
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    One option is to recognise that quite a number of Victorian / Edwardian 0-6-0 / 0-4-4T / 4-4-0 locos shared parts such as boiler, cylinder and motion.

    As an example, the boiler, cylinders and motion were shared between the Drummond M7 (0-4-4T); K10 (small wheeled 4-4-0), C8 (large wheeled 4-4-0) and 700 class (0-6-0), and the K10 and M7 shared wheels as well. So if you produced the necessary tooling and patterns to make those parts (and the myriad small components), then assembly into a 4-4-0, 0-4-4T or 0-6-0 would be relatively minor complexity once you had assured production of those components.

    Moreover, Drummond and his brother worked on several Scottish railways as well, so I suspect if you looked, you would find broadly similar locos that could carry Caledonian / North British / LMS / LNER liveries. Compare for example the leading dimensions of the 700 goods and the Caledonian Jumbos; or the LSWR M7 / North British G7 and G8 / Caledonian 439 class. They aren't identical, but given suitable cosmetic detail, you'd be hard pressed to tell the difference based around a common "core" of cylinders / boiler / wheels / motion.

    Tom
     
    andrewshimmin and ghost like this.

Share This Page