If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Air Cocks

Тема в разделе 'Locomotive Engineering M.I.C', создана пользователем Eightpot, 10 окт 2008.

  1. Eightpot

    Eightpot Resident of Nat Pres Friend

    Дата регистрации:
    10 авг 2006
    Сообщения:
    8.340
    Симпатии:
    2.506
    Пол:
    Мужской
    Род занятий:
    Engineer Emeritus
    Адрес:
    Aylesbury
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Wanted - A source of a couple of 1" BSP threaded Westinghouse in-line air shut-off cocks. Given to understand that they are fitted for isolating parts of the air system on Class 04 Shunters, possibly other Diesel/Electric classes too.
     
  2. yorksireenginegroup

    yorksireenginegroup Well-Known Member

    Дата регистрации:
    23 окт 2006
    Сообщения:
    1.016
    Симпатии:
    0
    Род занятий:
    MECHANIC
    Адрес:
    OAKHAM
    any good plumbing suppliers should be able to get these if not let me know i might be able to source one and post it :-$
     
  3. Steve

    Steve Resident of Nat Pres Friend

    Дата регистрации:
    7 окт 2006
    Сообщения:
    12.734
    Симпатии:
    11.853
    Род занятий:
    Gentleman of leisure, nowadays
    Адрес:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    do you particularly want Westinghouse valves? If you do you will probably have to source them from locos being scrapped. If not, any decent ball valve will do the job. Possibly even a better job. Available from BSS or any valve supplier. Don't buy the cheapest!
     
  4. Eightpot

    Eightpot Resident of Nat Pres Friend

    Дата регистрации:
    10 авг 2006
    Сообщения:
    8.340
    Симпатии:
    2.506
    Пол:
    Мужской
    Род занятий:
    Engineer Emeritus
    Адрес:
    Aylesbury
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Hi Steve. Genuine Westinghouse ones wanted more for originality as they will be visible. Needed for the driving compartments of the ex Egyptian Sentinel railcar set at Quainton. Must be a loco being scrapped somewhere to act as a donor.
     
  5. Steve

    Steve Resident of Nat Pres Friend

    Дата регистрации:
    7 окт 2006
    Сообщения:
    12.734
    Симпатии:
    11.853
    Род занятий:
    Gentleman of leisure, nowadays
    Адрес:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Ah! You're working on the Sentinel railcar. Fantastic. I'd love to see that running. Am I right in thinking that it is out of gauge to run on most Heritage Railways?
     
  6. Eightpot

    Eightpot Resident of Nat Pres Friend

    Дата регистрации:
    10 авг 2006
    Сообщения:
    8.340
    Симпатии:
    2.506
    Пол:
    Мужской
    Род занятий:
    Engineer Emeritus
    Адрес:
    Aylesbury
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Afraid so. Certainly on width and possibly on height too. Current status engines and boiler (3-drum Yarrow type) removed, end bogie of power car rolled out and dismantled over this last weekend. A hell of a lot to do yet! Gala event next Sunday (26/10/08) at Quainton, Sentinel Loco 6515 should be in steam amongst others.
     

Поделиться этой страницей