If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

BR Mk 1 Bogie swap

Rasprava u 'Carriage & Wagon M.I.C.' pokrenuta od brennan, 24. Ožujak 2019..

  1. brennan

    brennan Member

    Pridružen(a):
    11. Rujan 2016.
    Poruka:
    408
    Lajkova:
    452
    Grad:
    Gloucester
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Anybody with experience of swapping commonwealth bogies for BR 1 type ? This is proposed as the commonwealth bogies are worn out but there is a stock of BR1 type available.
     
    brennan, 24. Ožujak 2019.
    #1
  2. namron

    namron New Member

    Pridružen(a):
    2. Veljača 2013.
    Poruka:
    41
    Lajkova:
    3
    No experience with your problem but might be interested in obtaining a couple of BR 1 bogies if you have spare
     
    namron, 14. Travanj 2019.
    #2
  3. martin1656

    martin1656 Nat Pres stalwart Friend

    Pridružen(a):
    8. Prosinac 2014.
    Poruka:
    19,263
    Lajkova:
    12,514
    Spol:
    Muškarac
    Grad:
    St Leonards
    Heritage Railway Volunteer:
    No I do not currently volunteer
    you might have to change some of the brake pull rods as are some commonwealth over head pull lever type, whilst i'm sure B1 are slung under levers with balancing levers ?
     
    martin1656, 15. Travanj 2019.
    #3
  4. gwalkeriow

    gwalkeriow Well-Known Member

    Pridružen(a):
    17. Kolovoz 2009.
    Poruka:
    1,710
    Lajkova:
    1,732
    Spol:
    Muškarac
    Interesi:
    Retired.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Commonwealths are indeed overpull brakes, B1 bogies built before the mid late 50s were underpull (GWR style) but then they realised the error of their ways and changed to overpulls. At the same time sliding band vacuum cylinders changed to rolling ring.

    In answer to the OP as long as you are changing over to overpull B1s the only other consideration is that you will need to swap the centre castings (keeping matching pairs)
     
    gwalkeriow, 15. Travanj 2019.
    #4
  5. Thompson1706

    Thompson1706 Part of the furniture

    Pridružen(a):
    19. Studeni 2007.
    Poruka:
    2,523
    Lajkova:
    1,886
    Spol:
    Muškarac
    Interesi:
    Retired
    Grad:
    Rhiwabon
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The cranked crossbeam fitted could also be of the wrong type.

    Bob.
     
    Thompson1706, 15. Travanj 2019.
    #5

Podijelite ovu stranicu