If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

Things that seemed a good idea at the time, but in practice are pretty useless.

Discussion in 'Steam Traction' started by Eightpot, Oct 3, 2019.

  1. Allegheny

    Allegheny Member

    Joined:
    May 8, 2015
    Messages:
    625
    Likes Received:
    308
    Gender:
    Male
    Heritage Railway Volunteer:
    No I do not currently volunteer
    The argument doesn't stack up, the Webbs and Drummonds also had independent drive to each axle.
     
    andrewshimmin likes this.
  2. LesterBrown

    LesterBrown Member

    Joined:
    Jan 20, 2009
    Messages:
    995
    Likes Received:
    761
    Location:
    Devon
    Funny how Dugald Drummond keeps cropping up in this particular thread.
     
    BrightonBaltic, ross and Jamessquared like this.
  3. Ploughman

    Ploughman Part of the furniture

    Joined:
    Apr 1, 2008
    Messages:
    5,806
    Likes Received:
    2,649
    Occupation:
    Ex a lot of things.
    Location:
    Near where the 3 Ridings meet
    Heritage Railway Volunteer:
    Yes I am an active volunteer
  4. Cartman

    Cartman Well-Known Member Account Suspended

    Joined:
    Dec 14, 2015
    Messages:
    2,290
    Likes Received:
    1,672
    Gender:
    Male
    Occupation:
    Van driver
    Location:
    Cheshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    He crops up on quite a few really. Like Webb and William Dean his locos were either very good or very bad.
     
  5. D1002

    D1002 Resident of Nat Pres

    Joined:
    Apr 25, 2011
    Messages:
    8,658
    Likes Received:
    6,415
    Gender:
    Male
    Location:
    Enfield
    Based on comments on another thread....Pacers!!
     
    BrightonBaltic likes this.
  6. johnofwessex

    johnofwessex Resident of Nat Pres

    Joined:
    Apr 6, 2015
    Messages:
    9,185
    Likes Received:
    7,226
    Gender:
    Male
    Occupation:
    Thorn in my managers side
    Location:
    72
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Try again
     
  7. johnofwessex

    johnofwessex Resident of Nat Pres

    Joined:
    Apr 6, 2015
    Messages:
    9,185
    Likes Received:
    7,226
    Gender:
    Male
    Occupation:
    Thorn in my managers side
    Location:
    72
    Heritage Railway Volunteer:
    No I do not currently volunteer
    AFAIK it worked tolerably well & even did some revenue earning runs
     
    ady and Cartman like this.
  8. Cartman

    Cartman Well-Known Member Account Suspended

    Joined:
    Dec 14, 2015
    Messages:
    2,290
    Likes Received:
    1,672
    Gender:
    Male
    Occupation:
    Van driver
    Location:
    Cheshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    They've given 30 odd years of service so like them or not, they're not useless
     
  9. LesterBrown

    LesterBrown Member

    Joined:
    Jan 20, 2009
    Messages:
    995
    Likes Received:
    761
    Location:
    Devon
    Brakes on bogie wheels?
     
  10. 30854

    30854 Resident of Nat Pres

    Joined:
    Mar 8, 2017
    Messages:
    12,172
    Likes Received:
    11,493
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Brighton&Hove
    Heritage Railway Volunteer:
    No I do not currently volunteer
    It did, although it was never 'handed over' to the running dept wallahs .... and only ever for freight (in commercial operation).

    The rationale for it's construction was solid enough at the time. Ireland isn't blessed with anything like the coal reserves of the UK, with the only significant deposits south of the border being around Arigna - which was the reason the Cavan & Leitrim NG line survived as long as it did, only closing when the entire output was diverted to a new power station. Arigna coal has a very high ash content, making it less than ideal for steam locos.

    With oil, then as now, priced in $US, utilising the only readily available 'native' fuel source (other than timber) to protect the scarce foreign currency reserves of that time and with the WWII coal shortages (which actually lasted, spasmodically, until late 1947), still fresh in both the CIÉ's and the Irish Government's memory, it made far more sense than it may seem from a modern perspective.
     
    andrewshimmin, ragl, jnc and 3 others like this.
  11. 8126

    8126 Member

    Joined:
    Mar 17, 2014
    Messages:
    823
    Likes Received:
    962
    Gender:
    Male
    Wardale is very explicit about the reason for feedwater heating in his writings. It is not, as I suspect they were often sold and judged, about saving water and fuel at moderate power outputs; the reason he cited was increasing the evaporation before the grate limit is reached (at which point economy drops off a cliff as a significant portion of the fire disappears up the chimney) and thus allowing higher power output. That's why they were popular in the US, home of sustained maximum power operation, and with French compounds creating 3000+hp at the drawbar from 40 sq ft of grate.

    One of the few sustained applications on a large class in this country appears to have been the fitting of ACFI feedwater heaters to the B12/1 class under the LNER, on which they generally lasted until rebuilding into B12/3s. With their relatively small grates for quite heavy duties before being replaced by B17s, they were arguably the most ideal application on the LNER, far more so than 2001. It's noted that the fuel savings were outweighed by the maintenance costs of the equipment, but that probably misses the point of what the equipment allowed.
     
    Osmium, andrewshimmin, Sheff and 3 others like this.
  12. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,100
    Likes Received:
    57,416
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    ... whereas modern railways are just stationary engines using electrons instead or rope!

    Tom
     
  13. Jimc

    Jimc Part of the furniture

    Joined:
    Sep 8, 2005
    Messages:
    4,052
    Likes Received:
    4,665
    Occupation:
    Once computers, now part time writer I suppose.
    Location:
    SE England
    Heritage Railway Volunteer:
    No I do not currently volunteer
    True, but it was a rope that could traverse curves readily. Switches on the other hand... But I wouldn't fancy keeping a seal of that length airtight economically even with today's materials.
     
    BrightonBaltic likes this.
  14. steamvideosnet

    steamvideosnet Well-Known Member

    Joined:
    Apr 12, 2011
    Messages:
    1,968
    Likes Received:
    2,476
    Gender:
    Male
    Location:
    Southampton, UK
    Don't say it too loudly, Didcot will be wanting to build 3 new locos for the line...

    James
     
  15. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,100
    Likes Received:
    57,416
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I'd nominate the Holcroft - Anderson recompression loco. Sound thermodynamics but bedevilled by the complexity of all the other equipment needed to get it to work, a tale not dissimilar to attempts to get steam turbine locos to work in practice, in particular the need to provide a forced draft in the aggressive atmosphere of the smokebox.

    Tom
     
    Last edited: Oct 3, 2019
    30854 and Cartman like this.
  16. Cartman

    Cartman Well-Known Member Account Suspended

    Joined:
    Dec 14, 2015
    Messages:
    2,290
    Likes Received:
    1,672
    Gender:
    Male
    Occupation:
    Van driver
    Location:
    Cheshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    The only turbine loco which did seem to work satisfactorily was the Turbo motive, LMS 6202, but it wasn't enough of an improvement over a conventional loco to be worth pursuing
     
  17. nickt

    nickt Member

    Joined:
    Apr 17, 2009
    Messages:
    476
    Likes Received:
    206
    Gender:
    Male
    The underlying show-stopper is that the maximum power which a tube between the track could generate is the cross sectional area of the piston within the tube times air pressure, assuming you could pump to a complete vacuum. You cannot have multiple pistons on a single train. I'm not sure what the inside diameter of Brunel's atmospheric railway was. Assuming it's 15 inches the cross sectional area is (15/2)^2*pi and atmospheric pressure is 14.7psi. That gives you a maximum tractive effort of around 2,600 pounds. Even in the mid 19th century steam locos were capable of much more than that.
     
    clinker and ross like this.
  18. Cartman

    Cartman Well-Known Member Account Suspended

    Joined:
    Dec 14, 2015
    Messages:
    2,290
    Likes Received:
    1,672
    Gender:
    Male
    Occupation:
    Van driver
    Location:
    Cheshire
    Heritage Railway Volunteer:
    No I do not currently volunteer
    How about the Fell diesel mechanical? Or the Clayton class 17s? Or the Metro Vick Co Bos?
     
  19. LesterBrown

    LesterBrown Member

    Joined:
    Jan 20, 2009
    Messages:
    995
    Likes Received:
    761
    Location:
    Devon
    I think it was a 25" pipe which equates to a theoretical maximum of 7,200lb, which would be comparable to the locos available in the 1840s but the weight of the locomotive was removed from the train.
     
    clinker, jnc and ross like this.
  20. Eightpot

    Eightpot Resident of Nat Pres Friend

    Joined:
    Aug 10, 2006
    Messages:
    8,077
    Likes Received:
    2,264
    Gender:
    Male
    Occupation:
    Engineer Emeritus
    Location:
    Aylesbury
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    There is/was a piece of this pipe at Didcot, but smaller than 25" diameter from memory.
     

Share This Page