If you register, you can do a lot more. And become an active part of our growing community. You'll have access to hidden forums, and enjoy the ability of replying and starting conversations.

6023

Discussion in 'Steam Traction' started by Eightpot, Oct 4, 2011.

  1. JJG Koopmans

    JJG Koopmans Member

    Joined:
    Nov 12, 2014
    Messages:
    382
    Likes Received:
    474
    Gender:
    Male
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Sorry, to me this is more an opinion than based on experience!
    A) Just before the SVR tests with King 6023, febr 2018, I was told that the King was more economical on coal and water with the new blastpipe. At that moment she had a trundling history.
    B) Since May this year we are testing a heavy duty 0-6-0 shunting engine modified the same way as the King, 4-orifices. Right away I was told that the locomotive was 20% more economical
    on the SHM heritage line from Hoorn to Medemblik in the Netherlands. Advantages mentioned were the improved accelleration, larger loads and the like. Biocoal was also tested and gave proper results.
    And yes, the crew is very important, but now they have a front-end which allows them to fire properly.
    Coal may only be a smaller part of the cost picture, but one should realize what the lesser load on the boiler means for the boiler life, by far the most expensive item of a steam locomotive.
    I am now in my 80 'st year and am of the opinion that those still advocating single orifice front-ends are very close to being fools and throwing away the future of steam locomotives.
    Kind regards
    Jos Koopmans
     
    Sheff, City_Steam, Johnme101 and 2 others like this.
  2. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,103
    Likes Received:
    57,432
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    There was a discussion (on the West Somerset thread) that suggested quite the opposite: that 6023 was currently consuming a lot of coal and water for the work done. See here and the next page or so. West Somerset Railway Operations A worn front end seemed to be part of the problem.

    Boilers are the most expensive part to overhaul: I’ve often wondered whether, for locos like a 9F or a King that are overpowered for heritage lines and have copper fireboxes and high working pressure, whether there would be a worthwhile enhancement in firebox life by reducing the working pressure to say 225psi. With the possible exception of the NYMR, it would make negligible difference to the ability to haul a viable load, since on most railways, train weight is dictated by platform length, not loco power, and certainly is when talking of large engines.

    Tom
     
    240P15, ragl, 26D_M and 3 others like this.
  3. Steve

    Steve Resident of Nat Pres Friend

    Joined:
    Oct 7, 2006
    Messages:
    11,930
    Likes Received:
    10,088
    Occupation:
    Gentleman of leisure, nowadays
    Location:
    Near Leeds
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    60007 ran for a short period at 225 psi on its previous boiler ticket and this did not create a problem on the NYMR. I'm sure that a 9F would not suffer from such a reduction, either. Things start to get more marginal when you get down to the class 4 & 5 locos and I wouldn't like to think of a Black 5 or B1 not having the full 225 psi available for dragging the diner around.
     
    Johnme101 and Jamessquared like this.
  4. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,103
    Likes Received:
    57,432
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Indeed - my thought was primarily for locos (such as 9F, King, and I guess A4) that had 250psi boilers.

    Tom
     
  5. Matt37401

    Matt37401 Nat Pres stalwart

    Joined:
    Jun 8, 2014
    Messages:
    15,328
    Likes Received:
    11,666
    Occupation:
    Nosy aren’t you?
    Location:
    Nowhere
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Just out of interest how do you reduce a boilers PSI?
     
  6. Western Venturer

    Western Venturer Well-Known Member

    Joined:
    Mar 13, 2006
    Messages:
    1,542
    Likes Received:
    546
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Sherborne or Molineux
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Adjust the safety valves to lift at lower pressure I guess
    .
     
  7. Fred Kerr

    Fred Kerr Resident of Nat Pres Friend

    Joined:
    Mar 24, 2006
    Messages:
    8,239
    Likes Received:
    5,250
    Gender:
    Male
    Occupation:
    Freelance photo - journalist
    Location:
    Southport
    Only if the owning group is prepared to pay the heavy costs of fitting the necessary equipment for main line duty.
     
  8. Matt37401

    Matt37401 Nat Pres stalwart

    Joined:
    Jun 8, 2014
    Messages:
    15,328
    Likes Received:
    11,666
    Occupation:
    Nosy aren’t you?
    Location:
    Nowhere
    Heritage Railway Volunteer:
    No I do not currently volunteer
    I believe its owner has already paid for reduced width cylinders. A bit like myself 6024 has lost a bit of weight!
     
  9. threelinkdave

    threelinkdave Well-Known Member

    Joined:
    Aug 1, 2013
    Messages:
    2,065
    Likes Received:
    1,240
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Stratford-upon-Avon or in a brake KD to BH
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    And draw a new red line on the pressure gauge
     
    ragl likes this.
  10. class8mikado

    class8mikado Part of the furniture

    Joined:
    Jun 1, 2009
    Messages:
    3,610
    Likes Received:
    1,438
    Occupation:
    Print Estimator/ Repository of Useless Informatio.
    Location:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Surely as blowing off represents a waste of energy just drawing the new Red line is the most important bit !
    Seems to be the done thing on the KWVR to always fire up to blowing off at Keighley but it is a notoriously difficult start.
     
    jnc likes this.
  11. guycarr360

    guycarr360 Part of the furniture

    Joined:
    Oct 4, 2005
    Messages:
    4,414
    Likes Received:
    2,729
    Gender:
    Male
    Location:
    Chester le Street County Durham
  12. Jamessquared

    Jamessquared Nat Pres stalwart

    Joined:
    Mar 8, 2008
    Messages:
    26,103
    Likes Received:
    57,432
    Location:
    LBSC 215
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    The point of musing about a reduction in boiler pressure isn’t about testing the fireman’s skill; it is about enhancing the life of the firebox by reducing the water temperature. I’m not aware of any British loco with a copper firebox that successfully ran at > 250psi (the Hawksworth Counties had the pressure reduced after a short period in traffic). Even 250psi is probably a bit marginal on firebox life with a copper box, something that BR and three of the big four were prepared to accept - as they pushed the limits of power within a constrained loading gauge - given access to considerable boiler maintenance resources, but something that could perhaps be profitably looked at in heritage use, especially for non-mainline use. Probably of most relevance to the owners of 9F locos.

    Tom
     
    jnc, Bluenosejohn and ragl like this.
  13. JJG Koopmans

    JJG Koopmans Member

    Joined:
    Nov 12, 2014
    Messages:
    382
    Likes Received:
    474
    Gender:
    Male
    Heritage Railway Volunteer:
    No I do not currently volunteer
    As I am in a position to ask the staff at GWS for verification, I received a heavy denial! "Some crews could not cope with the grate size and were moaning."
    I am wondering whether coal consumption is really metered or only based on impressions.
    Kind regards
    Jos Koopmans
     
  14. class8mikado

    class8mikado Part of the furniture

    Joined:
    Jun 1, 2009
    Messages:
    3,610
    Likes Received:
    1,438
    Occupation:
    Print Estimator/ Repository of Useless Informatio.
    Location:
    Bingley W.Yorks.
    Heritage Railway Volunteer:
    No I do not currently volunteer
    Yes Tom quite correct and of course any thing that is subject to repeated changes in pressure and temperature is better off if the range of that change is reduced. My point being that operating a boiler at less than its full pressure should be quite possible as a directive without adjusting the safety valves...
     
  15. Sidmouth

    Sidmouth Resident of Nat Pres Staff Member Moderator

    Joined:
    Sep 12, 2005
    Messages:
    9,635
    Likes Received:
    8,303
    Gender:
    Male
    Location:
    Alderan !
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    No however having the smaller engines available for traffic provides suitable motive power for the demo lines
     
    michaelh likes this.
  16. Sidmouth

    Sidmouth Resident of Nat Pres Staff Member Moderator

    Joined:
    Sep 12, 2005
    Messages:
    9,635
    Likes Received:
    8,303
    Gender:
    Male
    Location:
    Alderan !
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Thanks Jos

    what is noticeable is 6023's propensity to leak steam from the cylinders , possibly the middle ones . I've seen similar leakage in steam days . Where is it leaking from and what causes is this is the question vexing my mind
     
    Graft on likes this.
  17. Andy B

    Andy B Member

    Joined:
    Jul 31, 2007
    Messages:
    477
    Likes Received:
    585
    Location:
    Bristol
    All I know is that she was a lot better on water last year as against this year. Using more water requires more use of the injector and ultimately more coal.
     
  18. KHARDS

    KHARDS Well-Known Member

    Joined:
    Dec 19, 2006
    Messages:
    1,276
    Likes Received:
    75
    Occupation:
    Train Planner
    Location:
    Errr......in front of a computer?
    I can not comment on 6023s performance this year or indeed the last few years since the blastpipe was changed. I can however say that in its original configuration it was a horrifically inefficient machine.

    At the MNR we have had a Jub, Scot, Duchess and A4 visit, but the King used double the coal of any them. It had a visible impact on the railways account as the annual coal budget was destroyed.
     
  19. ghost

    ghost Part of the furniture

    Joined:
    May 29, 2006
    Messages:
    3,967
    Likes Received:
    5,064
    Gender:
    Male
    Location:
    N.Ireland
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    I know it has a double chimney, so it's a slightly different ballgame, but does 6024 have a similar reputation for coal?

    Keith
     
  20. std tank

    std tank Part of the furniture

    Joined:
    Sep 20, 2005
    Messages:
    3,808
    Likes Received:
    946
    Gender:
    Male
    Occupation:
    Retired
    Location:
    Liverpool
    Heritage Railway Volunteer:
    Yes I am an active volunteer
    Was it the right type of coal? GWR locos can be a bit finicky when it comes to coal in the tender.
     

Share This Page